Which car brand uses a bull as its logo?

1 Answers
MacLily
07/29/25 2:25am
The bull is the logo of Lamborghini, featuring a powerful charging bull, symbolizing the brand's high-performance sports cars and reflecting founder Ferruccio Lamborghini's indomitable spirit. Lamborghini is an Italian automobile manufacturer, now owned by Audi and part of the Volkswagen Group. Notable Lamborghini models include the Countach, Miura, 350GTV, LM002, and Diablo. For example, the Countach is a mid-engine supercar with dimensions of 4200mm in length, 2000mm in width, and 1070mm in height, a wheelbase of 2500mm, powered by a V12 engine paired with a 5-speed manual transmission.
Was this review help?
6
5
Share
More Forum Discussions

What are the differences between the imported BMW 5 Series and the Brilliance BMW 5 Series?

The biggest difference between the imported BMW 5 Series and the Brilliance BMW 5 Series is that the Brilliance BMW 5 Series has a lengthened body and wheelbase. The differences between the imported BMW 5 Series and the Brilliance BMW 5 Series are as follows: 1. The wheelbase is extended, providing larger rear seating space, and the car's configuration is also enhanced. The imported BMW and Brilliance BMW can be distinguished by the badges at the rear—the Brilliance BMW has the words 'Brilliance BMW' on its rear. 2. The Brilliance BMW has a slightly higher chassis, while the imported BMW's chassis is slightly lower, as the imported BMW leans towards a sportier design with a more dynamic feel. 3. In terms of interior, the Brilliance BMW offers only one option, whereas the imported BMW provides two choices to cater to more preferences. Both models share the same powertrain, equipped with a 2.0T turbocharged engine, but there are differences in engine components. The engine of the imported BMW 5 Series is entirely imported from Germany, while many parts of the Brilliance BMW 5 Series's engine are processed and procured domestically. Compared to the imported BMW, the Brilliance BMW shows some performance differences.
15
3
Share

Where is the fuel tank cap switch on a Buick car?

Buick has many models, and not all models have the same way to open the fuel tank cap. For most models, press the fuel tank cap when the vehicle is unlocked to open it, then there is an internal knob to twist open. More details about the fuel tank cap of Buick cars are as follows: 1. The fuel tank cap of Buick cars is divided into an inner cap and an outer cap. The outer cap is generally opened by an electronic control or cable control, and very few can be opened with a key. The electronic control button or cable control lever is usually located on the left or right side of the driver's seat, with a fuel pump icon on it. Just press or pull it, and the fuel tank door will open automatically. 2. The inner cap can only be seen after opening the outer cap. The inner cap is made of plastic material; turning it to the right tightens it, and turning it to the left opens it.
10
2
Share

How to Open the Fuel Tank Cap of a Corolla?

Enter the vehicle and locate the fuel tank cap switch below the left side of the driver's seat. Lift the fuel tank switch, and the fuel tank cap located at the rear left side of the vehicle will open. Slowly unscrew the fuel tank cap and hang it on the back of the fuel filler cap. Below is more information about the Corolla's fuel tank: 1. The 2019 Corolla has a fuel tank capacity of 50 liters, while the 2018 and 2017 models have a 53-liter capacity, and they require 92-octane gasoline. 2. Corolla owners should avoid waiting until the fuel warning light comes on before refueling. This is because the fuel pump is located inside the tank and operates at high temperatures during continuous use. Being submerged in fuel helps to effectively cool it down. When the fuel light comes on, it indicates that the fuel level is below the pump. Consistently waiting until the light comes on to refuel may shorten the fuel pump's lifespan, and having too little fuel or running out of fuel could potentially damage the pump. Additionally, do not blindly use higher-octane gasoline; simply follow the manufacturer's recommended fuel grade for refueling.
19
1
Share

Does the car head sweeping the line in the reverse parking of Subject 2 result in penalty points?

In the reverse parking of Subject 2, if the car head sweeps the line, 100 points will be deducted, resulting in failure of the current test. Other actions that also lead to a 100-point deduction include the vehicle body crossing the line, failing to enter the parking space, stopping midway, not following the prescribed route, not driving in the correct sequence, and exceeding the specified time limit. Subject 2 has a full score of 100 points, with evaluation criteria set for failure, 20-point deductions, 10-point deductions, and 5-point deductions. The rules for the Subject 2 driving license test state that any mid-test stopping, rolling back, or not following voice prompts will result in failure. Additionally, if the wheels or body cross the line, the test will be deemed a failure. Many students encounter line-crossing issues during Subject 2 training, with "crossing the line" being the most common reason for failure. The primary cause of wheel line-crossing is students not mastering the correct timing for steering. Besides missing the steering timing, another reason could be the steering speed not matching the vehicle speed. Subject 2 penalty standards: Not wearing a seatbelt: 100-point deduction. Starting the engine without the gear in neutral: 100-point deduction. Not using turn signals (including starting, changing lanes, overtaking, turning, and parking by the roadside); turn signals not used for more than three seconds (this is easily overlooked!); forgetting to turn off turn signals or using them incorrectly: 10-point deduction. Stalling once: 10-point deduction. Reverse parking: Not following the prescribed route sequence: 100-point deduction. Vehicle body crossing the line: 100-point deduction. Failing to complete the parking: 100-point deduction. Before reversing, if both front wheels do not pass the control line: 100-point deduction. Exceeding the 210-second time limit for the task: 100-point deduction. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. Slope parking and starting: After stopping, if the front bumper is not aligned with the pole line and exceeds 30 cm front or back: 100-point deduction. After stopping, if the front bumper is not aligned with the pole line but does not exceed 30 cm front or back: 10-point deduction. After stopping, if the starting time exceeds 30 seconds: 100-point deduction. Wheels touching the road edge line while driving: 100-point deduction. During starting, if the vehicle rolls back more than 30 cm: 100-point deduction. After stopping, if the vehicle body is more than 30 cm from the road edge line: 100-point deduction. After parking, if the parking brake is not fully engaged: 10-point deduction per occurrence. Parallel parking: After parking, if the vehicle body crosses the line: 100-point deduction. Not using or incorrectly using turn signals when exiting: 10-point deduction. Exceeding the 90-second time limit for the task: 100-point deduction. Touching the parking space boundary line while driving: 10-point deduction per occurrence. Wheels touching the lane boundary line while driving: 10-point deduction per occurrence. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. 90-degree turn: Wheels touching the road edge line: 100-point deduction. Not using or incorrectly using turn signals during the turn, or not turning them off after the turn: 10-point deduction. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. Curve driving: Wheels touching the road edge line: 100-point deduction. Stopping for more than 2 seconds midway: 100-point deduction. Driving without the gear in second or higher: 5-point deduction.
6
4
Share

What brand are the tires on the 10th-generation Civic?

With a brand-new turbocharged direct injection engine delivering 130kW of powerful performance and an ultra-low fuel consumption of 5.4L/100km, the 10th-generation Civic makes a grand entrance as the ultimate dynamic driving machine. Depending on the trim level, the 10th-generation Civic is equipped with Yokohama tires in R16/R17 sizes. Below is more information about the tires: 1. For safe vehicle operation, tires must be of the appropriate type and size, with clear and well-maintained tread patterns, and correctly inflated. 2. Tire lifespan depends on various factors, including driving habits, road conditions, vehicle load, inflation pressure, maintenance records, speed, and environmental conditions (even when the tires are not in use). 3. In addition to regular inspections and inflation pressure maintenance, it is recommended to have tires inspected once they have been in use for five years. After 10 years of manufacture, regardless of the tire's condition or wear level, all tires, including the spare, should be removed and no longer used. 4. The wear indicator grooves are 1.6mm shallower than the rest of the tire tread. If the tread wears down to expose these indicators, the tire should be replaced. On wet or slippery roads, severely worn tires exhibit significantly reduced traction.
11
3
Share

Where is the radiator of Geely Emgrand located?

Geely Emgrand's radiator refers to the water tank, which is located below the cooling fan. Open the engine hood, and the place with red coolant is the water reservoir. Follow the pipes from the reservoir to find the water tank. The radiator is part of the car's cooling system. The radiator in the engine's water cooling system consists of three parts: the inlet chamber, the outlet chamber, the main plate, and the radiator core. The maintenance methods for the car water tank are as follows: 1. Park the vehicle and turn off the engine. After the coolant temperature drops, open the expansion tank and add radiator cleaner. 2. Start the engine and let it idle for 5-10 minutes after the cooling fan starts working. 3. Turn off the engine and remove the front bumper of the vehicle. When disassembling, make sure all fixing screws are loosened, and then slowly remove from both ends to the middle. Be careful not to break the fixing clips. 4. After ensuring the coolant temperature has completely cooled, drain the radiator cleaner along with the coolant, and finally replace it with new engine coolant.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.