Which car brand has the phoenix logo?

Is there a safety officer in the car during Subject 2 test?

There is no safety officer in the car during Subject 2 test, only staff members in the testing area. Your score is evaluated by the onboard electronic equipment, and you need to sign the document when you pass the test. Here is a detailed introduction about it: Subject 2, also known as the small road test, is part of the motor vehicle driver's license examination and refers to the field driving skills test. Test items include: stake test, slope fixed-point parking and starting, parallel parking, passing single-plank bridge, curve driving, right-angle turn, passing width-limited gate, passing continuous obstacles, driving on bumpy roads, narrow road U-turn, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rain (fog) weather, slippery roads, and emergency situation handling.

13

4

Share

How to Make Car Windshield Washer Fluid?

Here are the methods for making homemade windshield washer fluid: 1. Spring Windshield Washer Fluid: Prepare a 2.5-liter plastic bottle, 2 liters of purified water, 250ML of 95% medical alcohol, and 1-2 caps of detergent. Mix them thoroughly and it's ready for use. The detergent is mainly for removing sand and dust, while the alcohol accelerates water evaporation, ensuring quick cleaning of the windshield. 2. Summer/Autumn Windshield Washer Fluid: Use a 2.5-liter plastic bottle, 2 liters of purified water, 500ML of 95% medical alcohol, and 1 cap of detergent. The alcohol is very effective in removing insect residue. If you're in the city, you can top up the reservoir with purified water, but it's not recommended to dilute the mixture on highways as it may reduce effectiveness. 3. Winter Windshield Washer Fluid: A mixture of 20% 95-proof alcohol and 80% water has a freezing point around -10°C, suitable for early winter. A mixture of 20-30% alcohol and 60% water has a freezing point of -15°C. A mixture of 40-50% alcohol and 50-60% water can reach a freezing point of -25°C without freezing, meeting most winter needs.

12

4

Share

Can You Stall the Engine in Subject Two?

You only need to complete tasks such as reversing into a garage, parallel parking, stopping on a slope, turning at a right angle, and driving on a curve, then return to the starting point after the assessment. There is no need to stall the engine. Here is an introduction to Subject Two: 1. Introduction One: Subject Two, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test. 2. Introduction Two: The test items include five mandatory tasks: reversing into a garage, parallel parking, stopping on a slope, turning at a right angle, and driving on a curve. Here are the precautions for Subject Two: 1. Introduction One: Do not wear items that obscure your face when taking photos, such as scarves, masks, hats, etc. 2. Introduction Two: When getting into the car, actively show your ID card, adjust the seat, turn on the left turn signal, fasten the seat belt, release the handbrake, and enter the test area only after hearing that the identity verification is successful. 3. Introduction Three: If the vehicle ahead is reversing into a garage, wait outside the arrow until the vehicle ahead moves to parallel parking before starting your test. 4. Introduction Four: For parallel parking, align with the reference point ahead, avoid pressing the solid lines on both sides, and keep the right wheel 20-50 cm away from the garage line. 5. Introduction Five: Wait for the vehicle ahead to exit before entering the curve driving test. If there is a vehicle ahead, wait outside the arrow. 6. Introduction Six: When starting on a slope, do not wait for the computer voice announcement because you must complete the starting action within 30 seconds. Do as you usually practice to ensure a smooth start without stalling or rolling back. 7. Introduction Seven: For turning at a right angle, control the speed carefully—do not go too fast. Align with the reference point, straighten the direction, identify the point ahead, and quickly turn the steering wheel fully to the left.

13

0

Share

Does coasting with the clutch fully depressed damage the clutch?

This is a standard operation. For manual transmission vehicles, braking involves fully depressing the clutch while simultaneously applying the brakes. During this process, there is inevitably a period of coasting, which does not inherently damage the vehicle. However, prolonged coasting in this manner carries certain safety risks. If braking is not intended for stopping, there's no need to depress the clutch—simply apply light brake pressure. Additional information: Reason: When the clutch is fully depressed, the engine and transmission are disconnected, causing the vehicle to lose power. This state imposes no wear on the engine or transmission. Braking in this condition does not harm the vehicle, as the engine and transmission are already disengaged. However, relying solely on the brakes for deceleration without engine braking increases the burden on the braking system over time, potentially compromising driving safety. Precautions: As the vehicle speed decreases, downshift sequentially through gears 6/5/4/3/2/1. Coasting in gear can achieve an average coasting distance of over 80% without fuel injection. This is because the vehicle's inertial force during coasting drives the transmission system and engine in reverse through the wheels. With no operational load, the fuel injection system can cease fuel delivery.

14

5

Share

What is the equivalent of 30 psi in atmospheric pressure?

30 psi is equivalent to 2 standard atmospheric pressures. Hazards of excessive tire pressure: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overextends tire cords, reducing elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. Sharp objects like nails or glass can easily penetrate the tire, leading to internal cracks or blowouts. Methods for insufficient tire pressure: If no damage is visible, inflate to normal pressure and reset the tire pressure system; If a puncture is found, promptly drive to a tire shop for repair and reinflation; If the tire pressure warning reappears after inflation without any punctures, it may be due to a leaking wheel rim deformation. Check and replace the rim if necessary.

8

2

Share

Is it normal to fail Subject 3?

It is normal. Subject 3 in the driver's license test is one of the more challenging subjects in the examination process and requires diligent practice. Below is relevant information: Introduction: Subject 3 includes the road driving skills test and the safety and civilized driving knowledge test, which are part of the motor vehicle driver's license assessment. It is the abbreviated name for the road driving skills and safety and civilized driving knowledge test subjects in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle being licensed. Specific test content for Subject 3: The road driving skills test generally includes: preparation before getting on the car, simulated lighting test, starting, driving in a straight line, shifting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and driving at night. The safety and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, methods for handling emergencies such as tire blowouts, and knowledge of post-accident procedures.

7

0

Share

Which car brand has the phoenix logo?

Is there a safety officer in the car during Subject 2 test?

How to Make Car Windshield Washer Fluid?

Can You Stall the Engine in Subject Two?

Does coasting with the clutch fully depressed damage the clutch?

What is the equivalent of 30 psi in atmospheric pressure?

Is it normal to fail Subject 3?

What is the reason for the red triangle light to be on?

Can I wear a mask throughout the entire Theory Test (Subject 1)?

What to Prepare Before the Subject 1 Exam?

What is the full name of Subject 4?