Which car brand has the field character logo?

Should I Replace the Bubbled Rear Window Film?

Rear window film with bubbles needs to be replaced. Below are the specific reasons for bubbles in rear window film: 1. Presence of moisture: If bubbles appear shortly after the film is applied, they are usually white spots caused by improper handling of moisture between the film and the glass during installation. 2. Use of low-quality film: If bubbles appear years after installation and gradually increase in number and size, this is due to the use of inferior film. Low-quality films, when exposed to long-term UV radiation, release toxic gases like formaldehyde, leading to bubble formation. Poor-quality films, such as those with aging adhesive layers, rough film structures, or easy delamination, will develop bubbles and ripples under UV exposure.

19

3

Share

How to Adjust the Shift Cable When Reverse Gear is Hard to Engage?

To adjust the car's shift cable, you need to remove the base cover plate and take off the shift knob to make the adjustment. If there is play in the shift cable, it is because the driver does not fully depress the clutch when shifting each time, which creates some play. However, the adjustment range for the shift cable play is relatively small, with very limited adjustment distance. A proper adjustment is sufficient. The main reasons for difficulty in shifting gears are as follows: 1. The car's temperature is low, and the transmission oil is not fully lubricated. 2. Difficulty in shifting into first gear while moving, due to a mismatch between vehicle speed and gear. 3. First gear and reverse gear do not have synchronizers.

2

1

Share

How to Maintain O-Ring Chains?

The following are relevant materials on O-ring chain maintenance:1. Motorcycle cleaning and lubrication: When maintaining the chain, it mainly involves cleaning and lubrication. Whether to lubricate the motorcycle chain depends on whether the chain is too dry or makes abnormal noises. If the motorcycle chain is neither dry nor making abnormal noises, then lubrication is unnecessary, but necessary cleaning is still required. Chains that are not cleaned and maintained for a long time will accumulate mud, dirt, and stones, leading to abnormal noises. Most importantly, it affects the chain's lubrication, accelerating the wear of the front and rear gears, and eventually causing issues like chain slippage.2. Maintenance misconceptions: Lubricating the chain is not about randomly applying engine oil, grease, diesel, salad oil, blended oil, peanut oil, etc., and brushing it on the chain. Non-O-ring chains can be treated this way, but O-ring chains must use chain oil because waste engine oil does not have the same strong penetration ability as chain oil. It will float on the chain's surface, attracting more dust and particles, causing more severe chain wear.

5

1

Share

How to Use the Pull Function in a Car?

The pull function in a car refers to the switch for the windshield washer system of a motor vehicle. Here are some relevant details: 1. When using a motor vehicle, simply adjusting to this setting will activate the front windshield washer system, causing it to spray water while the wipers work to clean the vehicle's front windshield, effectively performing the cleaning task. 2. The wiper on a motor vehicle, also known as a windscreen wiper, is a device used to remove raindrops and dust attached to the windshield. It improves the driver's visibility and enhances driving safety. According to legal requirements, almost all cars in most regions are equipped with windshield wipers. Some models also feature a rear wiper.

9

4

Share

Which is China 5, V or VI?

China V is the China 5 emission standard, and China VI is the China 6 emission standard. Here are the relevant details: 1. The transition from China 5 to China 6A emission standards is distinguished solely by the reduction in carbon monoxide emissions, from 1000mg/km to 700mg/km, a decrease of 30%. By the time the China 6B standard is implemented in 2023, carbon monoxide emissions will have decreased by 50% compared to China 5, with other pollutants also significantly reduced. 2. Comparing China 5 and China 6 standards, the threshold for China 6 is significantly higher. For automakers, this necessitates more stringent environmental technologies. Under emission control conditions, certain performance aspects are inevitably affected, with the most direct impact being on engine performance. Manufacturers must find ways to meet emission requirements while still delivering the power consumers demand. 3. The emergence of three-cylinder, two-cylinder, and even single-cylinder engines, due to their compact size, fewer cylinders, and better emission control, is set to become mainstream in the future.

18

2

Share

What tires does the Lavida use?

Volkswagen Lavida comes standard with Dunlop SP-SPORT01 tires, available in two sizes: 195/65R15 and 205/55R16. Relevant information is as follows: Tires are circular elastic rubber products mounted on various vehicles or machinery for ground rolling. Typically installed on metal rims, they support the vehicle body, absorb external shocks, maintain contact with the road surface, and ensure driving performance.

10

0

Share

Which car brand has the field character logo?

Should I Replace the Bubbled Rear Window Film?

How to Adjust the Shift Cable When Reverse Gear is Hard to Engage?

How to Maintain O-Ring Chains?

How to Use the Pull Function in a Car?

Which is China 5, V or VI?

What tires does the Lavida use?

Why does the car feel more powerful after changing the transmission fluid?

Can Traffic Violations Be Checked on the Same Day?

What to Do When a Keyless Start Car Cannot Detect the Key?

Can Motorcycles Get Wet in the Rain? What Happens If They Do?