Which car brand has a single vertical line as its logo?

1 Answers
ArianaLynn
07/25/25 8:35am
The car brand with a single vertical line as its logo is WEY, which is under the Great Wall Motors Group. The WEY VV7 is the first model launched under the WEY brand, classified as a midsize SUV. In terms of exterior design, the 2020 VV7 continues to adopt the brand's signature leopard-inspired bionic elements, featuring a sharp and bold front fascia and a fastback-style roofline at the rear. Depending on the variant, the new model offers a range of advanced features, including adaptive laser headlights, ADB adaptive high beams, AI facial recognition, cloud-based voice recognition, a fully automatic intelligent parking system, interactive display of navigation on the instrument panel, a third-generation high-definition wide-angle streaming media rearview mirror, a three-view driving recorder, a premium custom audio system, an ecological cabin air purification control system, and bidirectional power windows with variable speed control.
Was this review help?
18
3
Share
More Forum Discussions

What causes a car to start and then stall automatically?

The reasons for a car starting and then stalling automatically are: 1. The installed anti-theft system has not been deactivated; 2. Excessive carbon buildup in the throttle body, spark plugs, cylinders, fuel lines, or intake ducts; 3. Ignition system malfunction; 4. Low-voltage circuit failure; 5. Insufficient cylinder pressure; 6. Low fuel level in the tank or insufficient fuel pump pressure; 7. Leakage in the distributor wires; 8. Engine malfunction; 9. Clogged single or multiple fuel injectors. The correct steps for starting a car are: 1. Place the gear in P or N position; 2. Turn the key to the ON position and wait for about 10 seconds; 3. If the vehicle self-check is normal, you can start the engine.
10
5
Share

How to Shift Gears in S Mode for Cars?

Car S mode gear shifting correct method is: 1. Shift the gear to S mode, push the gear lever to the right, the transmission first enters sport mode; 2. Use the method of pushing the gear lever forward and backward to shift gears, pushing forward is upshift, pushing backward is downshift; 3. Switch to automatic mode by directly pushing left to D gear position to complete gear shifting. S mode is the sport mode of the car. In S sport mode, the transmission can shift freely, but the shifting timing will be delayed, keeping the engine at high speed for a longer time, allowing the car to travel at low gear and high speed for a longer time, thereby obtaining greater torque output and acceleration.
9
5
Share

How to Determine When to Replace Windshield Wipers

Signs indicating the need to replace windshield wipers include: 1. Aging or cracking of the wiper rubber due to prolonged use; 2. Squeaking noises during operation; 3. Streaks or marks left on the windshield; 4. Wipers skipping or chattering during use. Windshield wipers, also known as wiper blades or windscreen wipers, are blade structures installed in front of the windshield. The components of windshield wipers include: motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade. Their functions are: 1. To remove raindrops and dust adhering to the vehicle's windshield; 2. To improve the driver's visibility and enhance driving safety.
9
5
Share

What does P stand for in a car?

P in a car stands for Park, which is a common gear position in automatic transmission models. The P gear is a special neutral position that mechanically locks the output shaft of the transmission to secure the vehicle, functioning as a parking brake to prevent the car from moving. The gear functions in a car include: 1. R gear stands for Reverse, which can be engaged by pressing the safety button on the shift lever after the car has come to a complete stop; 2. N gear stands for Neutral, where the connection between the transmission and the engine's power system is disconnected when the car is in neutral; 3. D gear stands for Drive, where the transmission automatically shifts gears when in drive mode; 4. S gear stands for Sport mode, used when going uphill or overtaking; 5. L gear stands for Low, which keeps the car in a low gear during long downhill descents, eliminating the need to constantly apply the brakes.
12
2
Share

Does an automatic transmission car have idle speed when reversing?

An automatic transmission car does have idle speed when reversing. Idle speed refers to the engine running in neutral. The method for reversing an automatic transmission car is as follows: 1. Press the foot brake firmly and shift from N to R gear; 2. Release the handbrake and observe the intended reversing path through the rearview mirror or by turning around; 3. Gently release the foot brake, always ready to press it again to park; 4. If encountering a small obstacle and the car does not move backward when the foot brake is fully released, lightly press the accelerator while being ready to immediately press the foot brake again to prevent rapid reversing and potential danger; 5. After reversing to the designated position, press the foot brake firmly and engage the handbrake before releasing the foot brake; 6. Press the foot brake and shift from R to N gear; 7. Release the foot brake to complete the reversing maneuver.
13
0
Share

How to Turn Off the Rear Wiper on a Focus?

The method to turn off the rear wiper on a Focus is: 1. Locate the knob on the side of the wiper control lever; 2. Press it to the O position to turn it off. The Focus is a compact car under Changan Ford, with body dimensions of: length 4647mm, width 1810mm, height 1468mm, and a wheelbase of 2705mm. The Focus is equipped with a 1.5L naturally aspirated engine, with an L-type cylinder arrangement and 3 cylinders, paired with a 6-speed manual transmission. It uses a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.