Which car brand has a logo resembling a nail?

1 Answers
LeAllie
07/29/25 4:15pm
The car brand with a logo resembling a nail is Tesla. Below are specific details about Tesla: 1. Tesla Motors was established in 2003, specializing exclusively in the production of pure electric vehicles. Headquartered in Silicon Valley, California, USA, Tesla cars combine unique styling, efficient acceleration, excellent handling performance, and advanced technology, making them the fastest and most fuel-efficient vehicles on the road. 2. Currently, all models produced at Tesla factories (including the Model 3) come equipped with hardware capable of full self-driving functionality. Compared to human driving, this new hardware fundamentally enhances vehicle safety. 3. The dual-motor Model S represents an innovative improvement over traditional all-wheel-drive systems. It features a motor at both the front and rear of the vehicle, with digital independent control of torque for each wheel, enabling all-weather traction control under various road conditions. The Model S comes standard with all-wheel drive and dual motors, while the P100D Model S includes a high-performance rear motor that works in tandem with the efficient front motor to deliver supercar-level acceleration, achieving 0 to 100 km/h in just 2.7 seconds.
Was this review help?
11
3
Share
More Forum Discussions

What vehicle components should be checked before driving on the highway?

Here is a detailed introduction to the components that should be checked before driving on the highway: 1. Check tire pressure: Insufficient tire pressure can easily lead to a blowout. 2. Check engine oil: It is necessary to check the engine oil in the engine compartment when the vehicle is in a cold state. After the engine cools down, pull out the oil dipstick. The oil level should be within the minimum upper limit/maximum upper limit range on the dipstick, and should not exceed the marked interval. 3. Brake fluid check: The brake fluid in the engine compartment has a special marking. Brake fluid is usually located at the top of the engine compartment. Brake fluid has excellent water absorption properties. If the water content is too high for a long time, it can cause the brake fluid to overheat, leading to brake fade.
15
1
Share

How Many Kilometers Should a Truck's Wheel Hubs Be Maintained?

The manufacturer recommends maintenance every 20,000 kilometers. As long as the brakes do not return properly and the vehicle does not slide on slopes, maintenance is required, regardless of the specific mileage. Vehicle inspection items are as follows: 1. Tires: Check tire condition/wear and adjust pressure if necessary; 2. Lights: Inspect the working condition of the lighting system (headlights, indicator lights, emergency signal lights, trunk lights, passenger compartment lights, glove box lights, dashboard warning lights, etc.); 3. Washing Equipment: Check the working condition of the windshield wipers and washing equipment/inspect wiper blade position/wear; 4. Exterior Body: Visually inspect the exterior body, underbody protective components, pipes/hoses (exhaust---fuel lines---brake lines), and the condition of rubber components (dust covers, bushings, spacers, etc.).
5
3
Share

How to remove the adhesive from the car's ETC?

Adhesive from the car's ETC can be removed using an eraser. Here is some information about car ETC: 1. ETC Concept: ETC stands for Electronic Toll Collection, which is an automatic tolling system for highways or bridges. It uses a vehicle-mounted electronic tag installed on the windshield to communicate with microwave antennas at toll station ETC lanes via dedicated short-range communication. This system processes payments through computer networking technology with banks, allowing vehicles to pass through highway or bridge toll stations without stopping to pay fees. 2. ETC Applicability: ETC is particularly suitable for use on highways or in busy bridge and tunnel environments. Currently, there are dedicated ETC toll lanes at highway toll stations.
10
3
Share

6.8-meter Truck Freight Calculation

6.8-meter trucks generally consume 25-30 liters of fuel per 100 kilometers. Since they are typically used for short-distance transportation, fuel costs account for 50%-60% of the total transportation expenses. Additional calculations are required for off-peak seasons, return trips, multiple stops, and waiting times. Below is more information about 6.8-meter trucks: 1. Dimensions of a 6.8-meter truck: The cargo compartment is 6.8 meters long, 2.35 meters wide, with a floor height of 1.25 meters from the ground, sideboard height of 1.8 meters, total height of 4 meters, loadable height of 2.65 meters, and total truck length of 9.2 meters. 2. New regulations on load capacity for 6.8-meter trucks: According to the new regulations for 2-axle trucks, the total weight of the truck and its cargo should not exceed 18 tons. A 6.8-meter truck, which is a 2-axle truck, weighs approximately 8 tons, giving it a load capacity of 10 tons. 3. Calculation of cargo volume for a 6.8-meter truck: The cargo volume for a 6.8-meter high-side truck is calculated by multiplying the internal length, width, and height of the cargo compartment. For example, a 6.8-meter high-side truck can carry 38 cubic meters (6.7m × 2.3m × 2.5m) when space is fully utilized, though typically it can carry around 35 cubic meters.
13
4
Share

What is the mechanism of electrochemical corrosion?

Electrochemical corrosion occurs when metal materials come into contact with an electrolyte solution, leading to corrosion through electrode reactions. Here is a partial introduction to electrochemical corrosion: 1. Overview: Electrochemical corrosion is a redox reaction. In this reaction, the metal loses electrons and undergoes oxidation, a process known as the anodic reaction. The reaction products are metal ions that enter the medium or metal oxides (or insoluble metal salts) that form on the metal surface. Meanwhile, substances in the medium gain electrons from the metal surface and undergo reduction, a process known as the cathodic reaction. 2. Characteristics of the reaction process: Under certain conditions, oxidizers in non-electrolytes directly interact with atoms on the metal surface to form corrosion products.
1
1
Share

What transmission is equipped in the Kia K5?

The Kia K5 is equipped with a 7-speed dual-clutch transmission. The transmission is a mechanism used to change the speed and torque from the engine, capable of fixed or stepped changes in the transmission ratio between the output shaft and input shaft. The transmission consists of a gear transmission mechanism and an operating mechanism. The Kia K5 is a mid-size sedan under Dongfeng Yueda Kia, with exterior dimensions of 4720mm in length, 1815mm in width, and 1465mm in height, and a wheelbase of 2770mm. The Kia K5 is powered by a 1.6T turbocharged engine and a 1.8L naturally aspirated engine, paired with a 7-speed dual-clutch transmission and a 6-speed automatic manual transmission.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.