Which car brand has a logo resembling a greater-than sign?

Fuel consumption of Qin Plus DMI?

The model equipped with DM-i super hybrid technology has a comprehensive fuel consumption of only 3.8L/100KM when running on battery depletion. Introduction to BYD Qin Plus: 1. Body dimensions: Length, width, and height are 4765mm, 1837mm, and 1495mm respectively, with a wheelbase of 2718mm. 2. Powertrain: It is equipped with a 1.5-liter naturally aspirated engine, which has a maximum power of 81kw, reaching its peak power at 6000 rpm, and a maximum torque of 135 Nm, peaking at 4500 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 3. Suspension: The front suspension uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension. The MacPherson suspension is a relatively simple independent suspension structure with only one L-shaped control arm.

12

4

Share

How to Change a Spare Tire?

Here are the steps to change a spare tire: 1. Use the lug wrench from the car toolkit to slightly loosen the tire bolts; otherwise, you won't be able to loosen them after lifting the car. 2. Use the jack to lift the side with the flat tire. You can jack up the hard area along the edge of the car's underbody—there is usually a designated spot for jacking, which is easy to identify. Lift until the tire is off the ground. 3. Use the wrench to remove the tire bolts and take off the tire. Some tires may stick to the wheel hub, making them tight. You can kick the edge of the tire a couple of times to loosen it before removing it. 4. Take out the spare tire, align it with the bolt holes, and install it. Make sure the holes are properly aligned; otherwise, the bolts won't fit. Then, hand-tighten all the bolts and use the wrench to tighten them slightly. 5. Lower the jack and use the wrench to fully tighten the tire bolts. Apply the same force as when loosening them to ensure all bolts are securely tightened.

4

0

Share

From which year did the Focus start using three-cylinder engines?

Starting from the 15th generation models, the Focus has had three-cylinder variants. The entire 19th generation lineup currently on sale predominantly uses three-cylinder engines. Introduction to the 2020 Focus: 1. Exterior: Features a large honeycomb-shaped all-black front grille, lower body cladding, rear spoiler, and dual exhaust pipe design. 2. Configuration: New additions include a panoramic sunroof, one-button start, TPMS tire pressure monitoring, parking radar, and leather-wrapped steering wheel. 3. Powertrain: Equipped with two engine options - the 1.5L EcoBoost and 1.5L Ti-VCT, with all models meeting the China VI emission standards.

8

2

Share

What Causes Engine Oil to Enter the Car Radiator?

Here are several reasons and solutions for engine oil entering the radiator: 1. Cylinder Liner Damage: The presence of engine oil in the radiator may be due to cracks in the cylinder liner. Under high pressure, engine oil can seep directly into the car radiator through these gaps. Solution: Replace or repair the cylinder liner. 2. Radiator Damage: Damage to the engine oil radiator or transmission radiator can also cause oil to mix into the radiator. Solution: Replace the radiator. 3. Cylinder Head Gasket Damage: If there is engine oil in the radiator and the radiator high-temperature warning light is on, it is highly likely due to a damaged cylinder head gasket. Since the fuel in the cylinder is under high pressure for a long time, causing damage to the cylinder liner, the oil and water passages become interconnected. Solution: Replace the cylinder head gasket.

11

2

Share

How to Remove the Wiper Blades on the New X-Trail?

The replacement method for the wiper blades on the new X-Trail is as follows: 1. Lift the wiper blade directly by hand. 2. Press the switch tab on the wiper blade lightly while removing the old wiper. 3. Place the new wiper blade on the windshield and align it properly. 4. Reinstall it in the reverse order of removal and secure it with the hook. More information about the X-Trail wiper blades is as follows: 1. The sizes of the new X-Trail's wiper blades are 26 inches and 17 inches, using the U-type. When replacing the wiper blades, it is essential to use the original model-specific blades because they directly affect the driver's safety by cleaning dust and raindrops from the windshield, improving the driver's visibility and judgment of the road. 2. The wiper operation is controlled by the combination switch lever in the car. Some vehicles require twisting left or right, while others activate the wipers by moving the lever up and down. The wiper speeds are divided into low, medium, and high settings. The speed, direction, and angle of the wipers are fixed from the factory and sweep in a predetermined periodic direction.

12

5

Share

What is the method for matching the Volkswagen steering angle sensor with X431?

After replacing the steering gear, it is necessary to go to a repair shop to use a professional computer for matching, as it cannot be done by the vehicle itself. Turn on the computer and directly use the steering angle reset program of the new version X431, then follow the prompts. The automobile steering gear, also known as the steering mechanism or steering box, is the most important component in the automobile steering system. Its function is to amplify the force transmitted from the steering wheel to the steering linkage and change the direction of force transmission. Types of steering gears: 1. Rack and pinion steering gear: This is the most common type of steering gear. Its basic structure consists of a pair of meshing small gear and rack. When the steering shaft drives the small gear to rotate, the rack moves in a straight line. Sometimes, the rack directly drives the tie rod to turn the steering wheels, making it the simplest type of steering gear. 2. Worm and roller steering gear: This type of steering gear uses a worm as the driving part and a roller as the driven part. The worm has trapezoidal threads, and the finger-like tapered pin is supported by bearings on the roller, which is integrated with the steering rocker arm shaft.

1

2

Share

Which car brand has a logo resembling a greater-than sign?

Fuel consumption of Qin Plus DMI?

How to Change a Spare Tire?

From which year did the Focus start using three-cylinder engines?

What Causes Engine Oil to Enter the Car Radiator?

How to Remove the Wiper Blades on the New X-Trail?

What is the method for matching the Volkswagen steering angle sensor with X431?

Will the relay still conduct electricity if it's broken?

What is the front vehicle assist alert in Lavida Plus?

What are the length, width, and height of the Toyota Highlander?

When can C1 be upgraded to B2?