Which car brand has a horse head logo?

1 Answers
McVanessa
07/24/25 11:30pm
The horse head logo represents Baojun Automobile. Baojun's vehicle models include: Baojun 730, Baojun 360, Baojun 510, Baojun 530, Baojun e200, Baojun 310, etc. Taking the 2021 manual version Baojun 510 as an example, its body dimensions are: length 4220mm, width 1470mm, height 1615mm, with a wheelbase of 2550mm. The 2021 manual version Baojun 510 is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 99PS, maximum power of 73kW, and maximum torque of 135Nm, paired with a 6-speed manual transmission.
Was this review help?
5
0
Share
More Forum Discussions

How to Remove the Steering Wheel Airbag on a Teana?

The steps to remove the steering wheel airbag on a Teana are: 1. Locate the screw hole on the left side of the steering wheel and loosen it using a T40 tool. Note that the screw cannot be completely removed due to an internal stopper. 2. Find the screw hole on the right side and loosen it with the T40 tool as well. 3. After loosening the fixing screws on both sides, separate the driver's airbag from the steering wheel. It cannot be completely removed at this stage as it is still connected by the clock spring wiring harness. 4. The driver's airbag is also connected to the clock spring wiring harness at the back, which needs to be detached. 5. Use a small flathead screwdriver to release the fixing clip of the wiring harness to make it unfastened. 6. Use the small flathead screwdriver to disengage the yellow locking mechanism of the connector. Note that the yellow part must be released first before the black part underneath can be detached. 7. After releasing the locking mechanism, use the small flathead screwdriver to pry open the black connector part, and then the main airbag can be completely removed.
16
5
Share

How Often Should You Change the Oil in a New Car?

For a newly purchased car, the oil should be changed approximately every 6 months or after driving around 5,000 kilometers. The steps for changing the oil are as follows: 1. Lift the car, remove the underbody shield, and place a container beneath the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow for two minutes at the oil filler port, then tighten the drain plug after the oil has completely drained and wipe it with a tissue to check for leaks; 3. Reinstall the underbody shield and lower the car, then use a funnel to add new oil through the filler port. The functions of engine oil include: 1. Separating the surfaces of relatively sliding parts to reduce wear; 2. Carrying heat back to the oil pan and dissipating it into the air to help the radiator cool the engine; 3. Circulating carbon deposits, sludge, and worn metal particles from engine components back to the oil pan, flushing away contaminants generated on the working surfaces of the parts through the flow of the lubricating oil.
16
3
Share

How to Check Driving License Information on 12123?

First, open the Traffic Management 12123 APP and click on the 'Driving License' option in the upper left corner of the homepage to access the driving license interface where you can view the electronic version of your driving license. For regions where the electronic driving license feature is not yet available, you can also use the driving license QR code. Scanning this QR code will allow you to read your driving license information.
4
5
Share

How to adjust the valves of a 170 gasoline engine?

First, remove the spark plug and take off the pull cord starter. Take out the valve clearance measuring tool, then loosen the nuts on both the upper and lower rocker arms. Insert a 10mm feeler gauge beneath the rocker arm. Tighten the rocker arm nuts and remove the feeler gauge to complete the operation.
13
4
Share

Why Does the Buick Regal Depreciate So Quickly?

The main reason for the Buick Regal's rapid depreciation is the poor transmission tuning of American cars in recent years, with various issues like jerking and oil leaks casting a shadow over the reputation of American vehicles. Additionally, frequent heavy discounting in marketing strategies has kept the Regal's resale value consistently low. Introduction to the Buick Regal: 1. Exterior: The 'fang-like' iconic design on the front grille remains a highlight. The headlight design has become more aggressive, with each headlight consisting of 105 LED light sources. 2. Interior: The overall design language retains the familiar Buick style, with red stitching adding a touch of sportiness to the otherwise family-oriented atmosphere. The layered interior design enhances the sense of depth inside the cabin, while the newly added button-style gear shift saves space and adds a technological feel. 3. Powertrain: The Buick Regal currently offers a combination of 2.0T+9AT and 1.5T+9AT. The 1.5T model delivers a maximum horsepower of 170 HP, while the 2.0T reaches 237 HP. Paired with GM's latest 9AT transmission, the powertrain performance surpasses that of competitors in the same class. The 2.0T model even reaches its maximum torque of 350 Nm at just 1500 rpm.
18
2
Share

How to Activate Gesture Control in the 2021 BMW?

First, turn on the ignition switch and use the i-Drive system. Then press the MENU button in the multifunction button area and select 'Vehicle' on the display screen. Finally, choose i-Drive settings and select gesture control.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.