Which car brand has a diamond-shaped logo?

What are the differences between the new BMW 3 Series and the old 3 Series?

Here are the differences between the new BMW 3 Series and the old 3 Series: 1. Front design: The front of the new 3 Series has a flatter shape, indicating better aerodynamics and higher demands for sportiness. 2. Headlight design: The "Angel Eyes" headlights have evolved further, with sharper daytime running lights. The lower air intake grille has more distinct edges, making it look less bulky compared to the current model. The fog lights have been changed from circular to a strip shape. 3. Side profile design: The new 3 Series has a higher waistline that is no longer protruding. The Hofmeister kink has been redesigned, positioned further back with more distinct angles.

1

3

Share

What is the Principle of Sensors?

The principle of sensors is to convert specific measured signals into usable signals according to certain rules through sensitive elements and conversion elements, and then output them to meet the requirements of information transmission, processing, recording, display, and control. Sensors can detect physical quantities such as force, temperature, light, sound, and chemical composition, and convert them into electrical quantities like voltage and current or the on/off state of a circuit according to specific rules. Sensors are the primary component in achieving automatic detection and control, as their function is to convert non-electrical quantities into electrical quantities or circuit states, thereby facilitating convenient measurement, transmission, processing, and control.

16

2

Share

What causes a car with battery power to fail to start?

Reasons why a car with battery power fails to start: 1. Out of fuel - check the fuel gauge; if the needle is below the red line, the engine naturally won't start. 2. Dead battery - this could be due to prolonged headlight use draining the battery or the battery reaching its lifespan (generally recommended replacement every 2 years). Additionally, installing xenon headlights, high-power audio systems, or DVD players may cause electrical circuit failures. A simple way to check for battery issues is by pressing the horn. 3. Incorrect gear position - automatic transmission vehicles must be in P or N gear to start; placing in R or D gear will prevent ignition. Some manual transmission cars also require depressing the clutch pedal to start.

14

1

Share

What are the symptoms of a car running out of engine oil?

The symptoms of a car running out of engine oil: 1. Poor lubrication in the splash lubrication areas inside the engine; 2. When the oil level drops to the point of causing low oil pressure, it leads to inadequate lubrication on the engine's friction surfaces, resulting in abnormal vibrations, reduced power, and in severe cases, may cause engine bearing seizure; 3. The engine's variable timing solenoid valve may malfunction, preventing precise control of the engine's intake and exhaust valves, leading to operational abnormalities, decreased power, and increased fuel consumption. When low oil pressure is detected, the vehicle should be stopped and the engine turned off immediately to avoid irreversible damage. Simultaneously, contact a 4S shop for roadside assistance and necessary inspection and repairs.

1

4

Share

Is it harmful to rev the engine in neutral?

Revving the engine in neutral is harmful and can shorten the engine's lifespan. When the car is in neutral, the engine operates without any load. Suddenly pressing the accelerator in this state subjects some internal engine components to significant inertial forces, which can reduce the engine's longevity. If the engine is revved in neutral right after startup, it can accelerate engine wear. From a mechanical perspective, even though the gear is in neutral, the engine's power still drives the transmission's input shaft via the clutch, keeping it in an operational state. In this scenario, pressing the accelerator affects components like the input shaft, intermediate shaft, and constant-mesh gears, which adjust according to the engine's RPM, while the output shaft and synchronizers remain stationary. Prolonged revving in neutral or coasting long distances in neutral can damage the transmission, leading to issues such as input shaft bearing wear, synchronizer gear wear, burning, and transmission noise.

12

1

Share

How deep should brake disc grooves be before replacement?

Brake disc grooves exceeding 1 millimeter require replacement. The wear limit for brake disc grooves is 2 millimeters. If the grooves are not deep, the brake pads can be removed and smoothed with coarse sandpaper, then reinstalled. During use, this can help eliminate the grooves on the brake disc. Owners may opt for softer brake pads, which wear out faster but are less likely to cause grooves on the brake discs. For deeper grooves, the brake disc can be removed and the grooves smoothed out, a process commonly known as brake disc resurfacing. After resurfacing, the disc can be reinstalled and used, though its lifespan will be shortened, so direct replacement is recommended. Front brake discs typically need replacement every 60,000 to 80,000 kilometers, while rear brake discs should be replaced around 100,000 kilometers. Once the grooves reach the wear limit, they can affect the vehicle's braking performance. For safety reasons, it is essential to replace the brake discs with new ones.

17

0

Share

Which car brand has a diamond-shaped logo?

What are the differences between the new BMW 3 Series and the old 3 Series?

What is the Principle of Sensors?

What causes a car with battery power to fail to start?

What are the symptoms of a car running out of engine oil?

Is it harmful to rev the engine in neutral?

How deep should brake disc grooves be before replacement?

When will China 6 be implemented?

Where is the most suitable position to place car decorations?

How Often Should Fuel Additives Be Added?

What is the calculation method for fuel consumption per 100 kilometers?