Which car brand features a single horse as its logo?

Which position should the safety headrest align with in Subject 4?

In Subject 4, the safety headrest should be aligned so that the middle of the headrest corresponds to the middle of the head when the head is resting on it. Below is relevant information about Subject 4: 1. Introduction: Subject 4, also known as the Subject 4 theoretical test or driver's theory test, is part of the assessment for obtaining a motor vehicle driver's license. Subject 4 separates the requirements for safe and civilized driving, safe driving skills under complex conditions, and emergency handling knowledge from the original Subject 1, placing them after the actual road driving test of "Subject 3" to further assess the candidate's level of traffic awareness. 2. Test Content: Requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, methods for handling emergencies such as tire blowouts, and knowledge of post-accident procedures. There are no appointment restrictions for the safe and civilized driving theory test.

3

4

Share

What does violation code 1345 mean?

Traffic violation code 1345 refers to the violation of driving against prohibition signs or markings by motor vehicles. Below is a detailed introduction to traffic violation codes: 1. Meaning of violation codes: Traffic violation codes are encoding regulations established by the Ministry of Public Security for traffic violations committed by motor vehicles and pedestrians. 2. The first digit of the code: This is the behavior code, which includes numbers 1 to 5, 7, and 8. 1 indicates motor vehicle passage, 2 indicates non-motor vehicle passage, 3 indicates pedestrian or passenger passage, 4 indicates highway passage, 5 indicates other regulations, 7 indicates implementation rules of provinces, autonomous regions, or municipalities directly under the central government, and 8 indicates local regulations of cities (regions, autonomous prefectures, or leagues). 3. The second digit of the code: This is the penalty point classification code, which includes numbers 0, 1, 2, 3, 6, and 7. 0 indicates no points, 1 indicates 1 point, 2 indicates 2 points, 3 indicates 3 points, 6 indicates 6 points, and 7 indicates 12 points.

13

5

Share

What is the correct method for installing license plate screws?

Here is an introduction to the method of installing license plate screws: 1. First, screw the screw rod into the screw hole at the license plate installation position to check if all the screw holes are basically normal. After inspecting the screw holes, pre-assemble each set of screws. From top to bottom, the order is usually the anti-theft cap of the screw rod and the washer. The hexagonal screw cap is mostly unnecessary. 2. Align the pre-drilled holes on the license plate with the screw holes at the car's license plate installation position, then screw in the first set of screws. Be careful not to tighten them too much; just enough to hold the license plate in place. After completing the installation of the other sets of screws, when all four screws (some cars can only install two screws) are screwed in and checked to be secure, use a screwdriver to tighten the small opening on the anti-theft cap. Slightly pry the opening a bit larger with the screwdriver, then snap the anti-theft cap into place. The installation is now complete.

6

3

Share

What is the ground clearance of the 2017 CR-V?

The ground clearance of the Honda CR-V 2017 is 193mm when fully loaded and 208mm when unloaded. Below is a related introduction to the minimum ground clearance: 1. Minimum ground clearance size: The larger the minimum ground clearance, the stronger the vehicle's ability to pass obstacles or uneven ground, but the higher the center of gravity, which reduces stability; the smaller the minimum ground clearance, the weaker the vehicle's ability to pass obstacles or uneven ground, but the lower the center of gravity, which can increase stability. 2. Factors to consider: The minimum ground clearance must consider the passability of loading and unloading platforms during transportation, and the possibility that the car will not scrape when approaching the edge of a general sidewalk. If the vehicle is intended for sale in a specific country or region, the quality of local roads must also be considered. At the same time, the value of the minimum ground clearance has certain limitations, as it is related to the vehicle's function and aerodynamics. For example, sports cars have a relatively small minimum ground clearance, while SUVs have a relatively large minimum ground clearance.

16

4

Share

Should Tires with Cracks Be Replaced?

If there are minor cracks on car tires, the following methods can help determine whether the tires need replacement: 1. Outer edge wear; If you observe the outer edge of the tire in the direction of travel and notice significant wear, it indicates that the tire is frequently underinflated, meaning the pressure is insufficient. Inflate according to the "highway" standard, which is 30 kPa more than the normal standard. Note that underinflated tires are particularly unfavorable for driving in rainy conditions, as grip will noticeably weaken. 2. Convex and wavy wear; If you find that the contact part of the tire shows convex wear on both sides and the surrounding area exhibits wavy wear, it suggests that components such as the shock absorbers, bearings, and ball joints are severely worn. It is advisable to inspect the wear condition of the suspension system and replace any worn parts before changing the tires. 3. Uniform surface wear; Once the tread is worn out, it indicates that the tire's lifespan has ended, and replacement is necessary. Additionally, the tread plays a crucial role in dispersing water from the road surface, which is vital for maintaining the car's grip. If the wear has reached the standard tread depth (typically 1.6 mm for tires with a width less than 175 mm and 2 mm for wider tires), replacement is required. 4. Center wear; If severe wear is observed in the central area of the tire's contact part, it indicates that the tire is frequently overinflated. Be sure to check the accuracy of the pressure gauge and adjust the pressure accordingly. Note that overinflation is only necessary for high-speed or heavy-load driving.

3

4

Share

How many seconds should the fourth gear be maintained in Subject 3?

In Subject 3, it is best to keep the 4th gear engaged for more than 3 seconds. After starting in 1st gear, pay attention to shifting to 2nd gear at least 20 meters before the gear shifting section. Stabilize the speed in 2nd gear to 22 km/h. When you hear the gear shifting prompt, first press the accelerator to increase the speed in 2nd gear to 25 km/h, then press the clutch and shift to 3rd gear. Release the clutch and press the accelerator to increase the speed in 3rd gear to 30-35 km/h, then shift to 4th gear and immediately downshift to 3rd gear. After that, downshift without accelerating. Exam Content: The road driving skills test for Subject 3 includes the following for large buses, heavy-duty trailers, city buses, medium-sized buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, and small automatic transmission cars for the disabled: vehicle preparation, light simulation test, starting, driving straight, gear shifting operations, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing crosswalks, passing school zones, passing bus stops, meeting other vehicles, overtaking, making U-turns, and nighttime driving. Precautions: Lights: When changing lanes, making U-turns, or turning, remember to use the turn signals. After activating the turn signal, it's best to hold it to prevent it from automatically turning off when the steering wheel is straightened, which might not be detected by the sensor. Driving Straight: Generally, training vehicles are used for a long time, and during straight driving, they often deviate slightly. In such cases, gently adjust the steering wheel to correct the direction, but avoid large adjustments as they may affect the test results. Additionally, when driving straight, look far ahead and use reference points to avoid drifting off course. Speed: Except for straight driving or acceleration, it's best to maintain a speed of 20-30 km/h for other test sections, as this makes it easier to control the vehicle.

12

4

Share

Which car brand features a single horse as its logo?

Which position should the safety headrest align with in Subject 4?

What does violation code 1345 mean?

What is the correct method for installing license plate screws?

What is the ground clearance of the 2017 CR-V?

Should Tires with Cracks Be Replaced?

How many seconds should the fourth gear be maintained in Subject 3?

What is a Driver's License Photo Receipt?

Do I need to bring my ID card for the Subject 1 test?

What is the fuel consumption of the GPR150?

How many points are deducted for exceeding the time limit on a hill start?