Which car brand features a ram's head logo?

Where is the BMW 5 Series Air Filter Located?

The air filter for the BMW 5 Series is located in the engine compartment, near the engine hood support rod. Below is relevant information about the air filter: 1. The air filter for the BMW 5 Series is located in the engine compartment, near the engine hood support rod. It is also known as the cabin air filter and is used to filter the air inside the car's cabin. 2. If the filter needs to be replaced, the glove compartment must be removed for access. To replace the air filter, first open the glove compartment on the passenger side. The air filter has independent clips; press firmly upwards with both hands to release the glove compartment. The clips on both sides are independent. After releasing the clips, remove the upper cover to access the air filter. 3. The replacement cycle for the air filter is approximately every 10,000 kilometers or six months. In areas with severe smog, it is recommended to replace it every three months. The replacement cycle should be determined based on the external environment. 4. The air filter is highly effective, capable of filtering out external dust, pollen, particles, and other contaminants to maintain fresh air inside the cabin. It is important to note that the air filter should never be cleaned with water, as this can easily damage it.

17

4

Share

Is the Wuling Hongguang Front-Wheel Drive or Rear-Wheel Drive?

Wuling Hongguang is rear-wheel drive. Relevant information about rear-wheel drive vehicles is as follows: 1. The Wuling Hongguang is a front-engine commercial vehicle with a front-engine, rear-wheel drive configuration. Its advantages include strong acceleration and hill-climbing performance, greater load-bearing capacity, reduced noise and vibration due to the front-mounted engine, and a more comfortable rear passenger area. Rear-wheel drive vehicles provide more effective traction power compared to front-wheel drive vehicles. During acceleration, the center of gravity shifts backward, increasing the weight on the rear wheels, which reduces the likelihood of wheel slip. The increased friction results in greater traction, making rear-wheel drive vehicles superior in acceleration performance. 2. The rear wheels provide longitudinal force, while the front wheels handle steering by providing lateral force. As a result, rear-wheel drive vehicles have stronger lateral grip on the front wheels, leading to higher performance limits compared to front-wheel drive vehicles. The front-mounted configuration includes heat and sound insulation felts and soundproof panels, and the V-type powertrain mounting system prevents direct resonance, thereby reducing vibration and noise.

12

0

Share

How to turn on the high beam of Roewe RX5?

Roewe RX5 high beam turn-on steps are as follows: 1. Locate the light control lever of the Roewe RX5 vehicle. 2. Rotate the left knob of the Roewe RX5 vehicle's light control lever to the "OFF" position to turn off the lights. 3. Rotate the left knob of the Roewe RX5 vehicle's light control lever to the "-" position for the parking light mode. 4. Rotate the left knob of the Roewe RX5 vehicle's light control lever to the top position for the headlight mode. 6. Finally, push the entire control lever of the Roewe RX5 vehicle forward to activate the high beam.

13

3

Share

How to reset the maintenance light on JAC Shuailing T6?

You can use the universal special diagnostic tool TECH2 to reset it, or manually reset it using the button on the right side of the dashboard. The method to reset the maintenance light on JAC Shuailing T6 is as follows: 1. After maintenance, you can ask the staff at the car repair shop to turn off the maintenance light. If you want to do it yourself, it's also very simple. With the engine off, press and hold the short-distance counter reset button below the tachometer. Turn the ignition switch to the ON position, release the short-distance counter reset button, and the "SERVICE" sign will appear on the display. 2. Pull out the minute button on the clock, turn the minute button to the right, and the mileage will appear on the display; turn off the engine to reset the reminder message; turn the ignition switch to the ON position, and the "SERVICE" sign will disappear. 3. The maintenance light comes on to indicate that the car's engine oil is insufficient and does not reach the normal engine oil level. The maintenance light is a reminder to the car owner to maintain the engine, add engine oil, and ensure there is enough engine oil. Once enough engine oil is added, the maintenance light will automatically turn off.

3

5

Share

Where is the cabin air filter located on the Great Wall VV7?

The cabin air filter of the Great Wall VV7 is located under the glove compartment on the passenger side. To access the specific position of the cabin air filter, the owner needs to remove the two screws (left and right) on the footwell light panel below the glove compartment, loosen the cover plate, disconnect the footwell light connector, and remove the cover plate. Then, open the felt lining on the inner side of the center console to reveal the cabin air filter cover. Opening this cover will expose the cabin air filter. The steps for replacing the cabin air filter are as follows: 1. Remove the two screws (left and right) on the footwell light panel below the glove compartment. 2. Loosen the cover plate and disconnect the footwell light connector to completely remove the cover plate. 3. Open the felt lining on the inner side of the center console to expose the cabin air filter cover. 4. Open the cabin air filter cover to access the filter for replacement.

10

0

Share

Where is the water tank located in the Volkswagen Touran?

The water tank of the Touran is located in the front engine compartment. The maintenance method for the car water tank is as follows: 1. Park the vehicle and turn off the engine. Wait for the coolant temperature to drop, then open the expansion tank and add the radiator cleaner; 2. Start the engine and let it idle for 5-10 minutes after the cooling fan starts working; 3. Turn off the engine and remove the front bumper of the vehicle. Ensure all fixing screws are loosened during removal, and slowly dismantle from both ends towards the center to avoid breaking the fixing clips; 4. After ensuring the coolant temperature has completely cooled, drain the radiator cleaner along with the coolant, and finally replace it with new engine coolant.

6

1

Share

Which car brand features a ram's head logo?

Where is the BMW 5 Series Air Filter Located?

Is the Wuling Hongguang Front-Wheel Drive or Rear-Wheel Drive?

How to turn on the high beam of Roewe RX5?

How to reset the maintenance light on JAC Shuailing T6?

Where is the cabin air filter located on the Great Wall VV7?

Where is the water tank located in the Volkswagen Touran?

How to Reset the Sunshade of Tiguan's Sunroof?

How to Reset the Rear Tilt Function of the Tiguan Sunroof?

What tires does the Sylphy car use?

What Causes Abnormal Noise When Starting a Car?