Which button unlocks the trunk of a Chevrolet?

2 Answers
StEsther
09/06/25 2:48am
For high-end Chevrolet models, the trunk unlock button is located under the driver's door handle. For basic models, the trunk needs to be opened with a key. The location of the trunk switch varies depending on the model. Below is an introduction to opening the trunk for two types of models: Introduction to unlocking the trunk for different Chevrolet models: Chevrolet models are divided into high-end and basic models for trunk opening. For high-end models, the trunk opening switch is a button located under the driver's door handle. For basic models, the trunk needs to be opened with a key or by pressing the button next to the fuel tank cover handle under the driver's seat. Electric tailgate: The electric tailgate, also known as the electric trunk, refers to a trunk that can be opened or closed electrically or via remote control. To open the trunk, simply press the button inside the car or on the remote key, and the trunk will open automatically. To close the trunk, press the close button inside the trunk or inside the car, or use the remote key, and the trunk will close automatically.
Was this review help?
10
2
Share
McRiver
09/18/25 2:50am
The location of the trunk unlock button on a Chevrolet is actually quite intuitive. Looking at the remote key, there's a small button with a car icon showing its rear end—either on the front or the side—which is specifically for opening the trunk. Just press and hold it for two seconds to unlock. Inside the driver's seat, newer models usually have a trunk icon button either on the inner side of the driver's door handle or in the control panel area below the left side of the steering wheel. Press it while in Park (P) to pop the trunk open. For older models, the button might be hidden in a small storage compartment to the left of the steering wheel—just bend down to find it. Some SUVs like the Equinox also support a kick-sensor feature to open the trunk; simply swipe your foot under the center of the rear bumper to unlock it automatically. If none of these methods work, make sure the entire vehicle is in an unlocked state.
Was this review help?
20
1
Share
Expand All
More Forum Discussions

Why can't the sunroof of BMW 5 Series open?

It may be due to a sunroof circuit failure, damage to the sunroof drive motor, or foreign objects stuck in the sunroof track. Here is some related information about the sunroof: 1. Cause: Many sunroofs open by sliding along tracks, which have small gaps. When opening the sunroof, dust and sand from the road can enter these tracks. Over time, the accumulation of sand and mud can make it difficult to open the sunroof. 2. Maintenance: Regularly clean any foreign objects from the sunroof track gaps and apply lubricant to the tracks periodically. Due to frequent sliding and opening, the lubricant in the tracks will gradually decrease from friction. This increases the friction in the tracks, leading to greater resistance. Additionally, avoid opening the sunroof when driving on bumpy roads to prevent excessive shaking that could damage the sunroof track components.
2
4
Share

What brand is koko wheel hub?

The brand of koko wheel hub is Koko. Below is an introduction about the ET value of wheel hubs: 1. Meaning: The ET value of a wheel hub refers to the offset between the mounting surface of the wheel hub and the centerline of the wheel rim, commonly known as the offset. The J value represents the shape and height of the wheel hub flange. 2. Introduction to ET value types: Zero offset wheel hubs indicate that the mounting hole fixing surface of the wheel hub is located at the centerline of the wheel hub; positive offset wheel hubs indicate that the distance between the mating surface of the wheel rim and the center of the wheel rim is towards the outer side; negative offset wheel hubs indicate that the distance between the mating surface of the wheel hub and the center of the wheel rim is towards the inner side.
20
0
Share

What Are the Reasons for Difficult Hot Start of a Pull-Start Gasoline Engine?

1. Fuel injector may be leaking: While normal fuel injection is fine, leakage constitutes extra fuel supply. The more severe the injector leakage, the richer the air-fuel mixture becomes, leading to difficulty in hot starts. 2. Engine carbon buildup: Carbon buildup in the engine is a persistent issue. Carbon has a strong adsorption effect on gasoline. If there is significant carbon buildup on the intake valves, throttle, or pistons, it can easily adsorb some fuel, causing the air-fuel mixture to become too lean and affecting startup. This issue can also occur during cold starts. 3. Poor fuel quality: After a hot engine is shut down for a while, the engine compartment remains quite hot. If the fuel is highly volatile, it can form high vapor pressure in the fuel rail. When this pressure exceeds the fuel system's supply pressure, it creates vapor lock, resulting in overly lean fuel vapor from the injector and making startup difficult. 4. Intake air temperature sensor issue: The intake air temperature sensor is similar to the coolant temperature sensor in that both adjust fuel injection. However, if the coolant temperature sensor fails, it causes difficulty in cold starts, whereas a faulty intake air temperature sensor leads to difficulty in hot starts.
9
4
Share

What does the submarine symbol displayed on the car mean?

The submarine symbol displayed on the car indicates that the water temperature is too high. More information about high water temperature is as follows: 1. Coolant: If you find that the water temperature is too high due to coolant loss, you can add a small amount of distilled water as an emergency measure (Note: Do not open the radiator cap when it is hot, as there is a risk of burns). 2. Long-distance driving: For high water temperature caused by long-distance driving, you can pull over, turn on the hazard warning lights, and let the vehicle cool down naturally. 3. Damaged cooling fan: You need to find a nearby repair shop for inspection as soon as possible. 4. Damaged thermostat: When disassembling, the small circulation should be blocked to ensure that all the coolant is cooled by the radiator.
12
3
Share

What is 300kpa in terms of air pressure?

300kpa equals 3bar. Here is a detailed introduction to atmospheric pressure: 1. Introduction: 300kpa ≈ 3 atmospheres. This is because at 273k, 1 atmosphere ≈ 1kpa. 2. Unit: Pa [pressure unit]. In the International System of Units, the unit of pressure is Pascal, abbreviated as Pa (named in honor of the French scientist Blaise Pascal), which is Newton per square meter (N/㎡). Common units of pressure include kilopascal, kilogram-force per square centimeter, torr, etc.
7
3
Share

How many kilometers for the first maintenance of the Envision S?

The first maintenance for the Buick Envision is scheduled when the vehicle reaches 5,000 kilometers or 6 months, whichever comes first. Subsequent maintenance follows a cycle of every 5,000 kilometers or 6 months, or as indicated by the oil monitoring system. According to the vehicle maintenance manual, the warranty covers the first 3 years or 100,000 kilometers. The first maintenance includes free oil and oil filter replacement, along with basic vehicle inspections. Additional details: 1. The manufacturer's maintenance manual specifies maintenance every 5,000 kilometers or 6 months, or as prompted by the oil life monitoring system. However, many 4S dealers recommend the first maintenance at 3,000 kilometers or 3 months. If 3 months have passed but the vehicle hasn't reached 3,000 kilometers, it's advisable to wait until 3,000 kilometers, but it's best not to exceed 6 months. 2. From the perspective of vehicle care, earlier first maintenance is better than delayed maintenance because the first batch of oil tends to contain more impurities, which can be harmful to the engine. If the vehicle is used in good conditions, waiting until 5,000 kilometers for the first maintenance is also acceptable.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.