Which button unlocks the BYD trunk?
4 Answers
To unlock the BYD trunk, press the unlock button on the inner handle of the driver's door. Here are specific instructions for unlocking the BYD trunk: 1. Full vehicle unlock: The vehicle must be parked and turned off for full unlocking, or when the vehicle is fully locked, press and hold the trunk unlock button on the remote control for more than 3 seconds to open the trunk separately. 2. Methods to open the trunk: To open the rear door from inside the vehicle, when the rear door is closed, pull this switch for more than 1 second, and the rear door will automatically open to the highest preset height. During the opening process, pulling this switch again will immediately and smoothly stop the rear door at its current position. To open the rear door using the external switch, when the vehicle is unlocked, press the external rear door switch to open it. When the vehicle is locked, carry the valid smart key and press the external rear door switch to open it.
As a long-time BYD owner who has driven their cars for several years, the trunk unlocking method depends on the model, but there are usually several ways to do it. The most common is the small button with a trunk icon on the key fob – just press it once, and if it's an electric tailgate, it will automatically rise. Additionally, near the driver's side door or on the center console, there might be a rear trunk switch button that unlocks it with a press. Some newer models like the Tang series even have a sensor area on the exterior of the trunk – a simple foot swipe or light touch can open it, which is quite convenient. If the key fob battery dies or the button malfunctions, manual trunk opening is necessary: some cars have a small hole inside the tailgate where inserting a key or screwdriver can unlock it. I recommend checking the vehicle manual since BYD configurations vary by model – avoid forcing it open to prevent damaging the latch.
When I first bought my BYD, I was also clueless about how to open the trunk. Later, I figured it out. The button on the key with the trunk symbol is the unlock button—just press it to release. Sometimes, if you forget your keys in the car, you can also find a control button near the driver's armrest; pressing it will automatically pop the trunk open. This design is quite user-friendly. Don’t worry if you’re a beginner—try it a few times, and once you get familiar, it’ll be as easy as opening your front door. If pressing the button doesn’t work, it might be due to low battery or a blown fuse. It’s best to check the key or the car’s condition first before rushing to a repair shop. Also, always glance around before opening the trunk in a parking lot to avoid hitting anything—safety first.
When it comes to safety, extra caution is needed when opening the BYD trunk. The unlock button is usually located on the key fob or the interior control panel. Before pressing it, ensure there are no people or obstacles behind the vehicle, especially for models with power liftgates that can automatically open and close to prevent pinching hands or hitting objects. Some models are equipped with sensors that detect obstacles and stop automatically, but this feature may not be flawless—always scan the area beforehand as a habit. If the button fails to work after multiple attempts, it could indicate a faulty lock mechanism or electrical issue. Seek professional inspection promptly and avoid forcing it open to prevent accidents. When opening the trunk on a slope, pay extra attention to vehicle stability: engage the parking brake to prevent items from rolling out and causing hazards.
