Which button to press when there is fog in the car?

1 Answers
HarleyRose
07/24/25 8:38pm
Press the front window defogger button when there is fog inside the car. When the temperature inside the car is higher than the outside temperature, fog forms. Here are some methods to remove fog: 1. Special defogging products: Spray this type of defogging agent on the inner surface of the car glass and wipe it clean. It not only removes dirt from the glass but also forms a transparent protective film on the glass, preventing water vapor from condensing and forming a fog layer. 2. Open windows for air circulation: If the fog is not heavy, you can open a gap in the windows on both sides (do not do this when it is raining). This allows air inside the car to circulate, and the temperature inside the car will gradually approach the outside temperature, causing the fog to dissipate.
Was this review help?
1
1
Share
More Forum Discussions

What is the model number of the Langdong's taillight?

The model number of the Langdong's taillight is T10. Taillights are used to alert vehicles behind that there is a car ahead during nighttime driving and to indicate the positional relationship between the two vehicles, hence they are installed on both sides at the rear of the car. The design principle of taillights is to have sufficient luminous intensity so that the taillight signal can be clearly discerned by other drivers or pedestrians even in bright daylight; during nighttime driving, the light emitted by the taillights should not cause glare or discomfort to other drivers or pedestrians. The Langdong is a compact sedan with body dimensions of 4570mm in length, 1775mm in width, and 1445mm in height, and a wheelbase of 2700mm. The Langdong uses a MacPherson independent suspension for the front and a torsion beam non-independent suspension for the rear.
1
4
Share

What are the reasons for the high-pressure common rail fuel pump not delivering oil?

Sub-shutdown switch is in the connected state; rail pressure is too low; battery voltage is too low; synchronization signal is incorrect. Here are the relevant introductions: High-pressure common rail diesel engine: A high-pressure common rail diesel engine refers to a fuel supply machine in which the generation of injection pressure and the injection process are completely separated in a closed-loop system composed of a high-pressure fuel pump, pressure sensor, and electronic control unit (ECU). High-pressure fuel pump: The high-pressure fuel pump delivers high-pressure fuel to the common rail (Rail), achieving precise control through the oil pressure in the common rail, making the pressure in the high-pressure fuel pipe (Pressure) independent of the engine speed, which can significantly reduce the degree to which the diesel engine's fuel supply pressure varies with engine speed.
5
2
Share

What are the evaluation criteria for used cars?

Evaluation is generally based on the car's purchase age, mileage, exterior condition, interior decoration, and main components. Below is a relevant introduction: 1. Exterior inspection: Check the exterior of the used car, usually by observing the car's paint surface from one direction (clockwise or counterclockwise) for significant dents and color differences. You can use light and reflection principles to assist in evaluating the paint's gloss. 2. Evaluation techniques: If a consumer is interested in a specific model, they can compare it with other used car markets, appropriately highlighting the car's shortcomings and emphasizing the advantages of other cars to 'reasonably' lower the price. However, avoid comparing different dealerships within the same market. When comparing models of the same grade and year but different brands, with similar configurations and no significant difference in market share, it's generally acceptable to praise one while downplaying the other. Minor flaws such as exterior scratches, aging parts, interior stains, or damages can be 'amplified' for negotiation purposes.
15
3
Share

Can a swollen battery still be traded in for a new one?

As long as the battery is swollen, it will be scrapped. Trading it in for a new one means recycling the lead and plastic at a discounted price, which has nothing to do with whether the battery is old or new. Below is the relevant introduction: 1. Battery: A battery is a type of storage battery, also known as an accumulator. Its working principle is to convert chemical energy into electrical energy. The battery commonly referred to by people is a lead-acid battery, which mainly uses lead and its oxides as electrodes and a sulfuric acid solution as the electrolyte. 2. Working principle: A lead plate filled with spongy lead is used as the negative electrode, a lead plate filled with lead dioxide is used as the positive electrode, and a 22-28% dilute sulfuric acid solution is used as the electrolyte. During charging, electrical energy is converted into chemical energy, and during discharging, chemical energy is converted back into electrical energy. When the battery discharges, metallic lead is the negative electrode, undergoing an oxidation reaction and being oxidized to lead sulfate; lead dioxide is the positive electrode, undergoing a reduction reaction and being reduced to lead sulfate.
5
5
Share

Is Lynk & Co Owned by Geely?

Lynk & Co is a product under the Geely Automobile Group and serves as a sub-brand of Geely. It is a premium brand of the new era, jointly established by Geely Holding Group, Geely Automobile Group, and Volvo Cars. Lynk & Co integrates European technology, European design, global manufacturing, and global sales, built upon the CMA (Compact Modular Architecture) mid-size car platform, which was co-developed by Volvo Cars and Geely Automobile with Volvo taking the lead. Taking the Lynk & Co 03 as an example, in terms of exterior design, its aerodynamic styling combines the brand's urban contrast aesthetics family design philosophy with aerodynamic efficiency, largely maintaining the signature Lynk & Co design language. The front fascia features split-type headlight clusters paired with a horizontal front grille and lower trim elements.
16
5
Share

Is it necessary to reach the designated parking spot for the pull-over parking in Subject 3?

It is mandatory to reach the designated parking spot for the pull-over parking in Subject 3. Below are the key points to note for the pull-over parking in Subject 3: 1. Speed: Keep the speed slow, properly control the clutch to avoid stalling, and a slower speed makes it easier to adjust the distance between the vehicle body and the roadside line. Reduce speed and shift to second gear. 2. Parking: Depress the clutch and brake to stop, engage the handbrake, shift to neutral, turn off the turn signal—all these actions should be done smoothly in one go. 3. Rearview mirror: Always check the rearview mirror. Even if you add a head-turn observation, do not neglect the rearview mirror, as failing to check it may lead to point deductions. 4. Head-turn observation: Do not forget to perform a head-turn observation. Not turning your head to observe the traffic situation on the left rear before opening the door to exit the vehicle will also result in a failing score.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.