Which button to press when the car window is fogged up?

1 Answers
DominicMarie
07/24/25 3:43am
To defog the car window, activate the front windshield defogging mode, then turn on the air conditioning cooling AC switch and lower the temperature. The fog will clear quickly. For automatic air conditioning, simply press the one-touch defrost button, and the remaining operations will be performed automatically. If you want to use the heating system to defog, it is recommended to stop the car first and let the hot air completely dry the moisture inside the car, and the fog will disappear. When the car window is fogged up, press the external circulation button to introduce outside air into the car, which can remove the fog faster. Front windshield defogging works by directing the air conditioning airflow to the front windshield, thereby reducing the temperature difference on both sides of the glass to achieve the defogging effect. When the rear window is fogged up, the water vapor can be evaporated through the rear window heating function, thus achieving the defogging effect.
Was this review help?
11
1
Share
More Forum Discussions

Can ETC be installed by oneself?

ETC can be installed by oneself, and the installation method is as follows: 1. Check whether the ETC card and OBU are damaged, press the anti-removal button of the OBU, the red light will briefly light up, and the OLED screen will display the words "Please insert the card", indicating that the device is normal; 2. Clean the front windshield, keep the glass surface dry, tear off the protective film of the OBU back adhesive, paste it to the installation position, and press it by hand for 2 to 3 minutes; 3. Insert the ETC card with the front facing the driver and the back facing the front glass, and insert the chip into the device. ETC is an electronic toll collection system. ETC uses the on-board electronic tag installed on the vehicle's windshield to communicate with the microwave antenna on the ETC lane of the toll station through dedicated short-range communication, and uses computer networking technology to settle with the bank in the background, so that the vehicle can pay the highway or bridge toll without stopping when passing through the highway or bridge toll station.
10
2
Share

Where is the Cruze's Cabin Air Filter Located?

The cabin air filter in the Cruze is located behind the glove compartment on the passenger side. Below is more information about the cabin air filter: 1. The cabin air filter is a filter installed in the car's air conditioning system that absorbs dust particles, reduces respiratory discomfort, minimizes irritation for allergy sufferers, and protects the air conditioning cooling system. Regular cleaning of the cabin air filter helps extend its lifespan. 2. When the car's air conditioning is in use while driving, outside air enters the cabin. However, the external air contains numerous harmful substances such as dust, pollen, soot, abrasive particles, ozone, odors, nitrogen oxides, sulfur dioxide, carbon dioxide, benzene, etc. These substances can have significant adverse effects on human health, potentially leading to respiratory diseases. 3. Only with a cabin air filter installed can the outside air be purified, ensuring fresh air inside the vehicle. A high-quality cabin air filter can absorb dust particles, alleviate respiratory discomfort, enhance driving comfort, and protect the air conditioning cooling system. 4. The cabin air filter should not be exposed to humid environments or direct sunlight. If the filter is no longer functional, it is recommended that the owner replace it promptly to avoid affecting the normal operation of the air conditioning system.
17
5
Share

How to Turn on the Bora's Low Beam Headlights?

After turning on the Bora's lights, the light control lever is located on the left side of the steering wheel. Move the lever to the low beam icon to activate the low beam headlights. Additional Information: 1. Generally, pushing the lever toward the engine compartment turns on the high beams continuously; pulling it back one notch turns off the high beams and restores the low beams; pushing it one more notch toward the driver flashes the high beams, and releasing the lever automatically returns it to the low beam position. This is commonly used to alert oncoming vehicles, known as alternating between high and low beams. 2. Although the high beams can be activated by pushing the lever outward, a prerequisite is that the low beams must already be on. Otherwise, operating the lever in other light modes will not activate the high beams. However, pulling the lever inward to flash the high beams has no restrictions and can be done even when the lights are off. 3. If a driver is unsure whether the high beams or low beams are on during nighttime driving, they can check the indicators on the dashboard. The low beam icon has downward-pointing light lines, while the high beam icon has straight, forward-pointing light lines.
12
4
Share

What is the normal leakage current for a car?

Under normal circumstances, the leakage current of a car is generally around 45 milliamperes. Cars have dark current, which falls within the normal range of leakage. There are two methods for charging the battery: Fast Charging (Constant Current Charging): Fast charging does not necessarily save time. It only quickly activates the surface of the battery, while the battery's interior is not fully charged. Slow Charging (Constant Voltage Charging): Another method for charging a car battery is slow charging, which takes 10-15 hours. Deeply discharged batteries must undergo slow charging; otherwise, insufficient charging time and inadequate charge will directly affect the car's driving performance. Causes of Battery Leakage: Short Circuit or Oxidation of Battery Plates: This leads to self-discharge and power loss, which is caused by internal battery discharge. This factor is an important indicator of the battery's quality. Grounding Circuit Causing Leakage: Leakage caused by grounding of car electrical components, wiring harnesses, sensors, controllers, actuators, and other electronic components and circuits leads to battery power loss. This is known as external battery discharge and is a latent circuit fault that must be identified and rectified.
3
2
Share

What are the main maintenance items for new energy vehicles?

New energy vehicles primarily require maintenance on three major components: the battery, motor, and electrical system. Additionally, maintenance includes the chassis, inspection of fluids and air circuits, air conditioning system, replacement of wear-prone parts such as brake pads, wipers, and tires. Routine maintenance of the cooling system, braking system, and suspension is similar to that of conventional vehicles. New energy vehicles refer to automobiles that utilize unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new types of on-board power devices), integrating advanced technologies in vehicle power control and drive systems, resulting in vehicles with advanced technical principles, new technologies, and novel structures.
13
5
Share

What is the correct way to turn on car lights?

Correct method is to use corresponding light buttons to turn on car lights. Here is detailed introduction about car lights: 1. Headlights: Also called front lights or LED daytime running lights. As the 'eyes' of a car, they not only relate to the owner's image but are crucial for safe driving at night or in bad weather. Usage and maintenance shouldn't be neglected. 2. Fog lights: Their purpose is to illuminate the road ahead in adverse conditions like fog, snow, heavy rain, or dusty environments to ensure driving safety. In recent years, fog lights are often designed on front bumpers for styling purposes.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.