···
Log in / Register

Which button to press to exhaust air from the car?

5 Answers
StJessica
07/29/25 11:00am

There are two circulation modes for exhausting air from the car: external circulation and internal circulation. Here are the extended details: 1. External circulation function: When using external circulation, fresh air enters the car from the external air intake, while the air inside the car is expelled through the vents at the rear of the vehicle, balancing the air pressure inside and maintaining air circulation. These vents are designed as one-way valves, allowing air to flow only from the inside to the outside. 2. Internal circulation function: The main purpose of the car's internal circulation is to block out polluted air, preventing external gases from entering the car, ensuring clean air inside without air flow circulation.

Was this review help?
18
5
Share
FrankDella
08/13/25 4:58pm

I've been driving for over ten years, and often encounter stale air issues during my commute, especially when stuck in traffic with poor air circulation, feeling stuffy. The most straightforward solution is to press the recirculation button on the AC panel—it usually looks like a small car with an arrow icon, conveniently located on the right side of the steering wheel. Pressing it switches to fresh air mode, where outside air is drawn in by the fan, gradually pushing out stale air through door gaps. During summer with the AC on, prolonged use of recirculation can make the air feel stale, so I press the button every half hour to ventilate, which helps prevent motion sickness and keeps me alert—especially crucial in heavy city traffic for safety. Some newer cars even allow scheduled air refresh via the touchscreen, making it more hassle-free. On highways, I avoid opening windows to reduce noise, relying solely on fresh air mode, which works just fine. In short, developing a habit of regular ventilation benefits driving health, a practice I’ve always maintained.

Was this review help?
16
2
Share
Expand All
VonBrielle
10/07/25 8:25am

As an experienced driver, I believe the key to ventilating the car's interior lies in that air recirculation button. Look for the small icon on the center console labeled 'Recirculation' or 'Fresh Air,' and press it to switch to fresh air mode. This way, the stale air inside the car is expelled through air pressure. If that's inconvenient, temporarily opening the windows for a few minutes also helps, though strong winds may mess up your hair, and the noise at high speeds can be unbearable. I always recommend ventilating the car before getting in when parked to avoid moisture buildup. Maintaining focus while driving is crucial, as prolonged use of recirculation mode increases carbon dioxide concentration and can lead to fatigue, so I suggest airing out the car during each refueling break. In winter, using fresh air mode with the heater provides drier, more comfortable warmth and helps prevent window fogging. For vehicles with automatic climate control, simply pressing the 'Auto' button handles ventilation automatically, making it easy for beginners too. Keeping the air flowing makes for safer driving.

Was this review help?
10
0
Share
Expand All
Linda
11/21/25 3:01am

I enjoy tinkering with car hacks, and when it comes to ventilating the car interior, the most common method is pressing the recirculation button on the AC panel. Look for the button with a car icon—press it to switch to fresh air mode, allowing outside air to push out the stale air. The system is designed simply, with a filter to help remove dust. In summer, not ventilating while using the AC can lead to odors and bacteria buildup, so I refresh the air every 20 minutes. Button placement varies slightly by model, but the manual will help you locate it. Newer automatic AC systems can adjust intelligently with just one press. Better air quality inside the car reduces distractions and helps prevent accidents.

Was this review help?
7
0
Share
Expand All
LaJuliette
01/11/26 4:37am

As a new driver, I often panic when the air inside the car gets stuffy. My instructor taught me a simple trick: locate the recirculation button with the car and fan symbol in the AC control panel, press it once to switch to fresh air mode, and the stale air gets expelled. It's easy to learn and works within minutes. This is especially useful when driving in rainy weather, preventing fogging and mildew. On highways, it saves fuel by avoiding unnecessary window opening. Beginners should develop the habit of regular ventilation—even 4S shops recommend this for interior protection. Operating the button is as simple as turning on a light.

Was this review help?
3
2
Share
Expand All
More Forum Discussions

What type of vehicle is the GLK?

The GLK is a mid-size SUV. The Mercedes-Benz GLK has both domestically produced and imported versions. The domestically produced version uses a total of three engines: a low-power 2.0-liter turbocharged engine, a high-power 2.0-liter turbocharged engine, and a 3.0-liter V6 naturally aspirated engine. In terms of body dimensions, the Mercedes-Benz GLK measures 4544mm in length, 1840mm in width, and 1689mm in height, with a wheelbase of 2755mm. Exterior-wise, the central dividing line that runs from the front to the rear emblem of the Mercedes-Benz GLK creates a contrast of light and shadow under illumination, accentuating its rugged and resolute character. Whether it's the irregularly shaped headlights, the square fog lamp covers, or the trapezoidal lower grille, all are defined by straight lines—every visible angle is sharp and square, with no curves to compromise its bold design.
11
2
Share

Is There an Age Limit for Getting a Driver's License?

There are age restrictions for obtaining a driver's license. All driver's licenses have age limits. Generally, a regular driver's license can be obtained between the ages of 18 and 70. However, the age limit for an A1 driver's license is stricter, requiring applicants to be between 26 and 50 years old. According to Article 11 of the Regulations on the Application and Use of Motor Vehicle Driver's Licenses (Ministry of Public Security Order No. 71), applicants for a motor vehicle driver's license must meet the following age requirements: Applicants for small cars, small automatic transmission cars, or light motorcycles must be between 18 and 70 years old; applicants for low-speed trucks, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery must be between 18 and 60 years old; applicants for city buses, medium-sized buses, large trucks, trolleybuses, or trams must be between 21 and 50 years old; applicants for tractor-trailers must be between 24 and 50 years old; and applicants for large passenger vehicles must be between 26 and 50 years old.
1
0
Share

What does it mean when winter tires exceed 50 kilometers?

The meaning of winter tires exceeding 50 kilometers is that the vehicle is in a safe state when driving at a speed not exceeding 50KM/H. This is part of the vehicle's driving safety reminder function, which can generally be set to turn on or off in the vehicle's central control system. In winter, rubber tires tend to become hard and brittle, leading to punctures or air leaks, so it is recommended to use winter tires during winter driving. Below are some related introductions: 1. Tire Introduction: Tires are very important components of a vehicle. The vehicle needs to choose suitable tires based on the usage environment and wheel size. 2. Winter Function: Since tires are made of rubber, in the low-temperature environment of winter, rubber hardens and becomes brittle. During vehicle use, issues like tire leaks or blowouts are more likely to occur. Therefore, winter tires should be used when driving in winter. Winter tires differ significantly from summer tires in terms of design and materials. Winter tires feature special tread patterns and rubber compound formulas, which effectively ensure driving safety in winter, especially in snowy or icy conditions. It is essential to switch to winter tires; otherwise, the vehicle's driving safety may be compromised.
9
1
Share

Can You Still Drive with a Bad Rear Wheel Bearing?

You can drive short distances, but it is recommended to replace it immediately. At best, it will affect comfort, increase tire noise, and cause the vehicle to pull to one side. At worst, it can damage the suspension, leading to steering system failure and potential accidents. Moreover, prolonged high-speed driving can cause excessive heat buildup, resulting in unnecessary wear on other components. Below is an introduction to issues with a bad rear wheel bearing: 1. Issue One: Damage and Rust. If foreign objects enter or the rolling elements become misaligned, it can cause damage, leading to poor impact resistance and abnormal noises. Exposure to acidic liquids or moisture over time can cause rust. 2. Clearance Issues: All automotive components and parts require proper clearance. If the gap between the rolling elements and the raceway is too small, it can lead to friction, heat buildup, and bearing seizure (where the components bond together due to high temperatures). Misaligned or tilted rolling elements will naturally stop functioning. 3. Poor Lubrication: Normally, the lubrication points of rolling bearings should use the highest-quality grease, and the gaps between the inner and outer rings, the cage, and the rolling elements should be fully filled. If this is not done, over time, the lack of grease between the rolling elements and the raceway will result in dry friction, leading to abnormal noises.
7
0
Share

What is the function of an automotive radiator?

Automobile radiator is designed to protect the engine from overheating damage and maintain it within an appropriate temperature range. Here is relevant information: 1. The radiator serves as a heat exchanger where coolant flows inside the radiator core while air passes outside it. Hot coolant cools down by dissipating heat to the air, while cold air warms up by absorbing heat from the coolant. 2. The working principle of the radiator involves using cold air to reduce the temperature of engine coolant circulating within it. The radiator consists of two main components: radiator fins composed of small flat tubes and overflow tubes located at the top, bottom, or sides of the fins. Together with the water tank, the radiator forms the cooling system of a vehicle. Given its metallic material which is susceptible to corrosion, contact with corrosive solutions like acids or alkalis should be avoided to prevent damage. 3. When adding water to the automobile radiator, the tank cap should be opened slowly, and operators should keep their bodies as far away as possible from the filler opening to avoid burns caused by high-pressure hot steam or oil vapor spraying out.
3
2
Share

What Does Car Idle Speed Mean?

Car idle speed refers to an operating state of the engine when the accelerator pedal is completely released while the engine is running. In this condition, the engine is idling. Idle speed is not a specific speed but rather an operating condition where the engine runs without load. The rotational speed of the engine during idling is called the idle speed, which can be adjusted by modifying the throttle opening. The optimal idle speed is the lowest RPM at which the engine does not vibrate. When adjusting the idle speed, abrupt fluctuations in RPM should be avoided, as they can cause premature wear to the engine. It is recommended to have the idle speed adjusted at an automotive service center. Excessive idling can be harmful to the car. Here are several methods to diagnose idle speed issues: Oil dipstick movement. During idle, the oil dipstick movement may appear less distinct than usual. Severe idle speed fluctuation. This can be observed using the engine tachometer or by reading data blocks. Normally, the RPM fluctuates around the expected idle speed; significant deviations indicate engine problems. Abnormal vehicle vibration. This is the most noticeable symptom. If the vehicle vibrates unusually, it suggests an idle speed issue.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.