Which button should be pressed for heating in Geely Vision X3?

[StGarrett]

For heating in Geely Vision X3, press the red button, not the blue one. Optimal temperature for car air conditioning in winter: The optimal temperature setting for winter air conditioning is 20 degrees Celsius. From the perspective of human comfort, in winter indoor environments, keeping the car temperature between 18 and 20 degrees Celsius will feel comfortable. This is because people wear more clothes in winter, and if the car temperature exceeds 20 degrees Celsius, it may feel slightly hot. Structure of car air conditioning: Automotive air conditioning systems generally consist of components such as the compressor, electronically controlled clutch, condenser, evaporator, expansion valve, receiver-drier, pipelines, condenser fan, vacuum solenoid valve, idle speed controller, and control system. The car air conditioning system is divided into high-pressure and low-pressure pipelines.

[Pat]

Operating the heater in the Geely Vision X3 is actually quite simple, and I've used it many times. First, start the car and let it warm up for a minute or two—the engine needs to reach temperature to produce warm air. On the climate control panel, there's a large round knob with blue and red markings: blue for cold air on the left and red for warm air on the right. Simply turn it clockwise to the red zone to increase the temperature. Then, press the adjacent fan button or adjust the airflow knob to activate the ventilation. You can set the air distribution mode to direct air toward the footwell for more even and cozy warmth. Remember, don’t turn it on immediately after starting the car, or you’ll just get cold air. Also, clean the air filter regularly to prevent blockages and odors. This method ensures a comfortable and safe ride in winter.

[VonCassandra]

The heating system of the Geely Vision X3 operates using engine waste heat, so there's no dedicated button for turning on the heater. Simply turn the temperature control knob on the dashboard to the red high-temperature zone and then activate the fan switch. Some people complain that the buttons don't work, but this is often because the fan speed isn't turned up or the car isn't warm enough. When the car is first started, the engine temperature is low, so no hot air will blow out—wait about five minutes. When operating, choose the foot vent mode to avoid fogging the windshield and save fuel. The center console layout is clear and easy to use. After years of driving, I often remind newcomers not to blindly increase the fan speed to prevent circuit overload. The key is mastering the temperature knob—natural and quick movements are all you need.

[VanOwen]

The first-year driving experience, turning on the heater can be confusing at first. In the Geely Vision X3, locate the temperature knob on the center console, the one with the red and blue markings, and turn it to the right towards the red position. Then press the button to start the fan, and the warm air will come out—simple, right? During winter driving, remember to wait until the car warms up before turning on the heater to avoid blowing cold air, which can be uncomfortable. Adjusting the airflow direction towards the feet will make it more comfortable. Occasionally, the airflow might be weak? It could be due to a dirty filter, so clean it regularly. The whole process has quick button responses, making it easy even for beginners, but don't forget to prioritize safe operation.