Which button is used to exit the mute mode in the Buick GL8?

1 Answers
MacJuniper
07/29/25 4:08pm
The button to exit the mute mode in the Buick GL8 is the hang-up button on the steering wheel. Below are the specific details about the Buick GL8: Positioning and Model: The Buick GL8 is a mid-to-high-end MPV launched by SAIC-GM Buick. Power System: It is equipped with a 2.0T SIDI direct-injection turbocharged engine, which has a maximum power output of 191 kW and a maximum torque of 350 Nm. In terms of the transmission system, the engine is paired with a 6-speed automatic manual transmission. During operation, the engine can deliver its maximum power at 5400 rpm and its maximum torque between 2000-5000 rpm.
Was this review help?
1
4
Share
More Forum Discussions

Should the Trunk Drain Plug Be Removed?

Should the Trunk Drain Plug Be Removed? The trunk drain plug should be removed. Below are the reasons why the trunk drain plug needs to be removed: Prone to rust: Each car door typically has two or more drain holes, usually located at the lower part of the door panel. If not removed, water can accumulate inside the door, leading to rust over time. Risk of short circuits: The door contains many components, including the window regulator and wiring for the car audio system. If exposed to water, these components can be damaged. Susceptible to clogging: Since the drain holes on the door are positioned low, they can easily get clogged with mud when driving on muddy roads. Therefore, it is important to clean the drain holes on the doors promptly.
11
3
Share

Where is the trunk escape switch located?

Open the trunk, and you will find a small black box on the upper part of the trunk lid. Inside this box is the trunk escape mechanism. Below is a related introduction about the escape mechanism: Pull-string or pull-ring escape mechanism: Usually, there is a pull-string or pull-ring on the trunk lid, and some even use self-luminous materials, making it easy for the owner to locate in the very dark environment of the trunk. There is no difficulty in operation; just pull it outward with force to open the trunk. Cover-type escape mechanism: There is usually a cover plate that needs to be pried open when in use, and then the lock core can be flicked open with a finger to release the trunk. Hidden escape mechanism: The opening mechanism is usually hidden in a small hole and requires the use of auxiliary tools such as a key.
2
2
Share

What is the solution when the trunk won't close and keeps beeping?

Here are the methods to deal with a trunk that won't close and keeps beeping: 1. Check if the trunk lock has reset: You can use the metal rod of a screwdriver to simulate the lock catch, press it horizontally upwards to see if it can lock. 2. If it won't lock: It means it hasn't reset, and you need to check the reason why it's not resetting. 3. If it can lock: You need to check the gap between the car lock and the lock catch fixed on the bottom door frame when locking. The gap may be too small, preventing the car lock from catching the lock catch. Adjusting the gap should solve the problem. Additional information: The reasons why a car trunk won't close are as follows: 1. The trunk switch is damaged. 2. There is a fault in the trunk control circuit. 3. The trunk hydraulic support rod is faulty, etc.
10
2
Share

Will leaving the rear window open during rain affect the car?

Leaving the window open allows rainwater to enter and wet the interior seats, but it has minimal impact on the car. Types of car windows: Car windows are typically divided into four types: front and rear windshields, ventilation windows, heat-insulating side windows, and sunroofs. The front and rear windows of a car usually use curved glass that provides good visibility and an aesthetic appearance, secured with rubber seals embedded in the window frame or specialized adhesives. For natural ventilation, side windows are often designed to move up and down or back and forth. Introduction to car windows: As early as 80 years ago, glass was installed on the Ford Model T, using flat glass at the front of the cabin to protect the driver from wind and rain. In the decades since, the glass industry has gradually become involved in the automotive sector, developing various types of safety glass such as laminated glass, tempered glass, and zone-tempered glass, significantly improving the performance of automotive glass.
13
2
Share

What are the differences between BMW X3 25i and 28i?

The main differences between BMW X3 25i and 28i lie in their powertrain. The BMW X3 25i has a maximum power of 184ps and maximum torque of 290Nm, while the 28i offers 224ps maximum power and 310Nm maximum torque. Detailed specifications are as follows: 1. Powertrain: In terms of performance, the X3 25i accelerates from 0-100km/h in 8.9 seconds, while the 28i is one second faster with a 0-100km/h time of 7.6 seconds. Actually, both the 25i and 28i versions of X3 have excellent product capabilities. 2. Exterior: Both models come with Sport and Luxury trim options, featuring attractive designs and rich configurations. Standard equipment includes cruise control, auto hold, hill descent control and other features.
8
2
Share

Is it necessary to go to a 4S store for car tire replacement?

Car tire replacement can be done at a 4S store or other maintenance facilities. Below is a detailed introduction about car tires: 1. Overview: Car tires are one of the important components of a vehicle, directly in contact with the road surface. Together with the car suspension, they help cushion the impacts encountered during driving, ensuring good ride comfort and smooth driving. 2. Function: They ensure good adhesion between the wheels and the road surface; improve the car's traction, braking, and maneuverability; and bear the weight of the car. The important role tires play in vehicles is increasingly being recognized by people.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.