Which Button is the Rearview Mirror Heater on the Binrui?
3 Answers
The rearview mirror heating button on the Binrui is located in the central control area. It is the fifth button from the left in a row of buttons, with an icon of a rectangle containing three upward wavy lines. This button controls the rearview mirror heating and also the rear windshield heating. The rearview mirror heating function is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the mirror surface, gradually removing rain or fog, eliminating the need for the driver to frequently wipe the mirror manually and thereby reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. There is no need to manually adjust the angle, as the driver's side has an adjustment button. Principle of the rearview mirror heating function: After rotating the button, the electric heater behind the rearview mirror glass will rapidly heat up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. The heat will radiate from both left and right rearview mirrors. At the same time, due to the temperature increase and evaporation, water droplets on the mirror surface will gradually shrink, and fog will slowly disappear, effectively defogging and defrosting the mirror. However, if the rain is particularly heavy, its effectiveness may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves electric heating wires embedded in the mirror, which consume a significant amount of power. When using this function, ensure the car is in an ignited state. Avoid activating the rearview mirror heating while the car is stationary to prevent draining the battery and potentially leaving insufficient power to start the car. Other methods for defogging rearview mirrors include: Opening windows slightly to create airflow between the inside and outside of the car, reducing the temperature difference and gradually dissipating the fog. Adjusting the car's air conditioning to the appropriate setting to blow warm air for defogging.
I've been driving the Binrui for several years. The rearview mirror heating button isn't standalone - it shares the same key with the rear window defogging function. Located near the driver's side on the center console, the icon shows a rectangle with several wavy lines, resembling a heater symbol. When pressed, both the mirrors and rear window start heating simultaneously, which proves particularly useful during rainy or cold weather to quickly evaporate moisture and prevent blurred vision. It typically runs automatically for 10 minutes before shutting off, so no need to worry about battery drain. If unsure about its location, check the owner's manual or carefully inspect the center console panel when parked. Remember to wait a few minutes after activation to observe mirror changes and confirm operation. During routine maintenance, always test the button's functionality to prevent safety issues caused by malfunctions.
As a newcomer who just started driving the Binrui, I remember initially struggling to find this button too. It turns out it's integrated with the rear window defroster button, located near the air conditioning control area. The icon is a patterned square—pressing it activates the mirror heating function, which quickly clears water accumulation during rainy or foggy weather. I recommend confirming the key is in the ON position before operation, then gently press the button and wait for the effect, avoiding repeated presses to prevent circuit damage. New drivers should consult 4S stores or watch online tutorials to develop good habits. Additionally, if the mirrors don't respond, it might be due to a blown fuse or loose connection—simple checks can resolve this. Regularly keeping the mirrors clean while driving reduces the heating workload.
