Which button is the fuel-saving mode on the Landwind X7?

Should the Time-Lapse Recording Feature of Dash Cams Be Enabled?

Whether to enable this feature depends on individual needs and driving frequency. Below is a detailed introduction to the time-lapse recording function of dash cams: To Enable or Not: If you drive frequently, it's advisable to enable time-lapse recording. This allows for round-the-clock vehicle monitoring and protection, and the battery consumption will be replenished during vehicle operation. However, if you don't drive often and the car remains parked for extended periods, such as half a month, it's not recommended to enable this feature as it may adversely affect the car battery. About Time-Lapse Recording: Time-lapse recording ensures the integrity of recorded content while significantly saving storage space. Typically, recording for 24 hours only requires about 5GB of storage space, enabling effective all-day vehicle monitoring to a certain extent.

8

3

Share

Do Cars Consume More Fuel in Winter or Summer?

It mainly depends on where the owner drives. In summer, the high temperatures lead to the use of air conditioning, which is the primary reason for higher fuel consumption. In winter, fuel consumption also varies by region. Northern areas experience more rain and snow, with driving in snowy conditions being the most fuel-intensive due to increased resistance. The following are reasons for high car fuel consumption: Incorrect Warm-Up Methods: The main purpose of warming up the car is to bring the engine oil to its normal operating temperature, allowing it to function more effectively. Many owners tend to warm up the car while stationary, refusing to drive until the water temperature rises. In reality, this method not only fails to protect the car but can also cause damage. Choosing the Wrong Engine Oil: For mid-to-high-end cars, engine oil must be selected according to the manufacturer's guidelines and should not be changed arbitrarily.

8

2

Share

What does the risk of rolling without shifting into P gear mean?

When the car dashboard displays a warning about the risk of rolling without shifting into P gear, it may be due to the driver's door not being properly closed and the gear not being shifted into P. This is the vehicle's reminder to the owner to ensure the door is closed and the gear is shifted into P when parking; otherwise, the car may roll. Solutions for the risk of rolling without shifting into P gear: Check if the driver's door is properly closed and if the brake is pressed while shifting gears. Ensure the gear shift button is pressed. Verify if the gear is shifted into P. If the gear cannot be shifted due to directly turning off the engine, simply turn on the ignition, press the brake, hold the gear shift button, and shift into P. If all the above conditions are ruled out, it is recommended to call a professional to diagnose and resolve any gear shift system issues using a computer. Detailed introduction of the P gear: P gear is the parking gear: When the gear lever is in the P position, the transmission is in neutral internally, but the output shaft is mechanically locked. At this time, the car will remain stationary even without pressing the brake, and it is generally used for long-term parking. When shifting into P gear, the car must be completely stationary. Do not shift into P gear if the car is not fully stopped, and always engage the handbrake. When parking on a slope, first engage the handbrake and then shift into P gear.

10

1

Share

What Causes the Abnormal Noise When Shifting to Reverse Gear?

Car shifting to reverse gear has abnormal noise because the reverse gear lacks a synchronizer. Within the short period after depressing the clutch, due to inertia, the internal gears of the transmission are still in a freewheeling state. If the gear is shifted immediately after depressing the clutch, the reverse gears will collide due to speed differences, resulting in resistance and gear grinding noise. Structure of Reverse Gear: The reverse gear does not have a synchronizer assembly, and the reverse gear pair adopts a spur gear structure. The process of engaging reverse gear involves axial movement of the gears, which is achieved through the arc-shaped teeth at the gear engagement end for direct gear engagement. The function of reverse gear is singular and straightforward—it enables the vehicle to move in the opposite direction for reversing, a feature indispensable for any car. In manual transmission models, the reverse gear also serves as a hill-holding brake; parking on a downhill slope can be achieved by engaging reverse gear to mechanically lock the drive shaft. Correct Operation for Shifting to Reverse Gear: Bring the vehicle to a complete stop, wait for 3 seconds after depressing the clutch, then gently engage the gear. This helps eliminate resistance and gear grinding noise, protecting the transmission gears. If the reverse gear cannot be engaged, first return the gearshift lever to neutral and release the clutch, then depress the clutch pedal again and re-engage the reverse gear.

13

1

Share

What does the triangular yellow warning light with an exclamation mark on the Touareg dashboard mean?

A triangle with an exclamation mark indicates a malfunction in the vehicle's general performance or components and functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, engine oil pressure sensor failure, etc. Solution: Visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault warning in vehicles. Besides the triangular exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic Transmission Fault: A yellow gear with an exclamation mark indicates an automatic transmission fault warning light, signaling a transmission malfunction or transmission fluid below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: A red circle with parentheses and an exclamation mark in the middle represents a brake system warning, indicating either a brake system malfunction or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents. Tire Pressure Anomaly: A yellow bracket with a horizontal line and an exclamation mark in the middle indicates a tire pressure monitoring warning light. This light turns on when the vehicle's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is a lighting fault indicator, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.

11

0

Share

What is the weight of the Teramont?

The Teramont has three body weights: Teramont 2022 330TSI Front-wheel Drive Premium Luxury Edition weight: 2005kg Teramont 2022 380TSI All-wheel Drive Luxury Edition weight: 2090kg Teramont 2022 530V6 All-wheel Drive Premium Luxury Edition: 2200kg The body weight mainly depends on the car model. The body dimensions are 5052mm/1989mm/1773mm in length/width/height. The Teramont is a new mid-to-large SUV model under SAIC Volkswagen, based on the Volkswagen MQB platform. The Teramont is equipped with mid-to-high-level features, such as electronic parking, front/side airbags, front/rear head airbags, knee airbags, tire pressure display, fatigue driving alert, front/rear parking sensors, rearview camera, cruise control, five driving modes, automatic parking, engine start-stop, auto hold, hill start assist, hill descent control, panoramic sunroof, and one-key start. Size parameters: The Volkswagen Teramont is a mid-to-large SUV with considerable dimensions. Data shows the Teramont measures 5039x1989x1773mm in length/width/height, with a wheelbase of 2980mm. The wheelbase is close to 3m, and the height is nearly 2m. Power parameters: In terms of the powertrain, it still features two different turbocharged engines: a 2.0T and a 2.5T V6. The 2.0T engine comes in low/high-power versions, with maximum power outputs of 186Ps/220Ps and peak torques of 320Nm/350Nm, respectively. The 2.5T V6 engine delivers a maximum power of 299Ps and a peak torque of 500Nm. Both are paired with a 7-speed wet dual-clutch transmission. Space parameters: The trunk depth is 610mm without folding the seats, 1270mm with the third row folded, and a maximum depth of 2260mm with the last two rows folded. Fuel consumption parameters: The MIIT-rated fuel consumption for the low-power 2.0T engine is 7.5L, the high-power 2.0T is 8.7L, and the 2.5T V6 is 10.1L. Stronger power leads to higher fuel consumption, which is also closely related to engine quality.

10

2

Share

Which button is the fuel-saving mode on the Landwind X7?

Should the Time-Lapse Recording Feature of Dash Cams Be Enabled?

Do Cars Consume More Fuel in Winter or Summer?

What does the risk of rolling without shifting into P gear mean?

What Causes the Abnormal Noise When Shifting to Reverse Gear?

What does the triangular yellow warning light with an exclamation mark on the Touareg dashboard mean?

What is the weight of the Teramont?

What Does a Flashing Red Light After Locking the Car Indicate?

Does Not Installing a Thermostat Have a Significant Impact on a Car?

What Causes Excessive Voltage in the Intake Air Temperature Sensor Circuit?

What Causes the Continuous Alarm of Tuya's Tire Pressure Monitoring System?