···
Log in / Register

Which Button is for the Mercedes Heated Rearview Mirror?

4 Answers
StErin
07/29/25 6:33pm

Mercedes heated rearview mirror features three curved upward arrows paired with a rectangle, located together with the REAR button for rear window heating, which simultaneously heats the rearview mirrors. The heated rearview mirror function ensures that the mirror surface remains clear when driving in rainy, snowy, or foggy conditions by utilizing heating wires embedded behind the mirror. The Mercedes GLS has body dimensions of 5214mm in length, 1956mm in width, and 1823mm in height, with a wheelbase of 3135mm. In terms of exterior design, the Mercedes GLS stands out with its large front grille and the prominent three-pointed star logo. The side profile features coupe-like flowing lines extending to the rear, complemented by wraparound LED taillights and curved trunk lid lines, creating a highly dynamic appearance.

Was this review help?
18
2
Share
Jasper
08/14/25 11:39am

After driving a Mercedes for several years, I finally learned the location of the heated mirror button. It's actually the same as the rear window defroster button, marked with a square and wavy lines icon. You can find it on the center console, usually in the air control area or the middle of the panel. Pressing it heats both the mirrors and the rear window to prevent icing or fogging, enhancing safety in rain or snow. Electrically, it uses resistance wires for quick heating, similar to an electric blanket, but avoid prolonged use to prevent circuit damage or battery drain. I recommend clearing dust from the mirror surfaces before use in winter or rainy seasons and checking the button's responsiveness during regular maintenance. If unresponsive, it might be a blown fuse – visit a shop instead of DIY to avoid short circuits.

Was this review help?
9
0
Share
Expand All
SanMaci
10/14/25 6:49am

I find Mercedes' heated mirror button super practical. It's integrated with the rear window defroster - just press the button with wavy squares in the climate control panel. Once activated, the mirrors heat up quickly to melt frost, preventing obscured rear views while driving and significantly improving safety. It reduces accident risks during rainy/foggy weather with dead-simple operation even for non-car-savvy people like me, but avoid unnecessary use in dry conditions to save battery. Check dashboard indicator lights for proper operation - if the button stays cold, it might indicate circuit or relay issues needing prompt repair. Regularly clean dust around the button to ensure smooth contact.

Was this review help?
5
4
Share
Expand All
DeAnthony
11/27/25 7:44am

I often use the heated mirrors on my Mercedes. The button is located near the rear window defroster, just press the one with the wavy pattern in the central air conditioning control area. Press it to activate, and the mirrors will heat up to prevent fogging or icing, especially useful when driving in rainy or cold weather for an immediate clear view. Remember to turn it off after use to avoid unnecessary operation. Also, check that the button is clean and free of dust to ensure it functions properly.

Was this review help?
5
0
Share
Expand All
More Forum Discussions

Why Does the Car Central Control Screen Freeze?

Car central control screen touch failure occurs because prolonged use leads to numerous trivial files occupying system memory, resulting in a freeze. Below is relevant information about car central control screens: 1. Concept: It controls comfort and entertainment devices such as car air conditioning and audio systems. It can display driving information and enhance the vehicle's human-machine interaction system, along with real-time updated navigation functions to provide accurate driving routes. 2. Precautions: It is essential to have it installed at a reputable auto repair shop. The installation process involves dealing with relatively complex wiring. If the central control screen is installed unprofessionally or incorrectly, it may lead to screen malfunctions or even burn out components inside the car, posing certain safety hazards.
10
0
Share

Must the engine oil be changed when only 10% remains?

Engine oil with only 10% remaining can be selectively replaced. The functions of engine oil include the following 3 points: 1. Lubrication: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing bush. To prevent excessive wear of parts, an oil film needs to be established between the two sliding surfaces. A sufficiently thick oil film separates the surfaces of the relatively sliding parts, thereby achieving the goal of reducing wear; 2. Auxiliary cooling: Engine oil has a relatively low specific heat capacity and is located inside the engine, so it does not inherently have a cooling effect. However, during engine operation, heat energy is generated by fuel combustion. The engine oil can carry the heat back to the oil tank and then dissipate it into the air, assisting the radiator in cooling the engine. The actual cooling effect is provided by the water outside the engine casing; 3. Sealing and leak prevention: Engine oil can form a sealing ring between the piston ring and piston, reducing gas leakage and preventing the entry of external contaminants.
7
4
Share

At what water level can a car be determined to have water ingress?

Here is an introduction to the water ingress levels for cars: 1. Exhaust pipe height: Safe wading depth. The pressure generated by the engine exhaust is sufficient to expel water that may backflow into the exhaust pipe. Therefore, as long as the engine is not manually turned off and the vehicle maintains a sufficiently stable power output, it can prevent water from backflowing into the exhaust pipe, allowing safe passage through water at this level. 2. Half-wheel height: May cause water ingress into the car. Modern cars have good waterproofing, and as long as they are not submerged for an extended period, water leakage is generally unlikely. 3. Air intake height: Maximum wading depth. The air intake height is the most critical indicator for a vehicle's wading capability, because once water enters the air intake, it can cause the engine to stall, and in severe cases, water can be sucked into the engine, causing permanent damage.
17
0
Share

How to Turn Off the Two Rear Lights in Volkswagen Magotan?

Volkswagen Magotan's two rear lights can be turned off either from the control panel above the driver's seat or from the rear control panel. Additional Information: Here is an introduction to the Volkswagen Magotan: 1. Exterior: The new Magotan is more elongated and elegant. Compared to the previous generation, its wheelbase has increased by 100mm, reaching 2812mm. 2. Interior: It features a smooth and refined typical European style. The latest soft-material dashboard from Volkswagen Germany is integrated into the cabin design, with separated colors and the dashboard's strong lines extending onto the doors. In the center console design, the new Magotan has neatly arranged buttons without being rigid and adds features like automatic parking and an engine start button. 3. Technology and Configuration: In terms of powertrain, the new Magotan continues to use Volkswagen's most advanced TSI+DSG golden combination, offering three displacement options for consumers: 1.4TSI, 1.8TSI, and 2.0TSI. It is equipped with intelligent driving assistance systems, including ACC adaptive active cruise control, ParkAssist intelligent parking assistance system, RearAssist rearview imaging system, OPS simulated visual front and rear parking system, etc.
2
5
Share

How to Handle Driving During License Suspension Period?

During the period of driver's license suspension, the method for handling driving is that the public security traffic management department will impose a fine ranging from 200 to 2,000 yuan and deduct 6 points for one offense. Below are relevant details about the driver's license: 1. Introduction: The full name of the driver's license is the motor vehicle driver's license, which is a license required by law for motor vehicle drivers. The motor vehicle driver's license refers to the legal certificate issued by the management department after the applicant has studied, mastered traffic regulations and driving skills, and passed the examination, permitting the driving of a certain type of motor vehicle; 2. Legal Provisions: According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," applicants for a motor vehicle driver's license must meet the stipulated requirements. Article 7 states that the contents recorded and annotated on the motor vehicle driver's license include the driver's information: name, gender, date of birth, nationality, address, ID number, and photo.
6
4
Share

Does Water in the Engine Count as a Flood-Damaged Car?

Water in the engine does count as a flood-damaged car. A flood-damaged car refers to a vehicle that has been submerged in water, typically affecting components such as the engine, transmission, or chassis. This usually occurs when the water depth exceeds the wheel level or when the car is submerged in water exceeding one-third of the wheel height for an extended period. Additional Information: A flood-damaged car is one that has been submerged in water, and the extent of damage can generally be categorized into three levels. Details are as follows: 1. Level 1: Water depth exceeds the wheel level and enters the interior. 2. Level 2: Water depth exceeds the dashboard. 3. Level 3: Water level rises above the car roof. Typically, Level 1 flood-damaged cars are more common, often resulting from adverse weather or road conditions that leave the car parked in deep water.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.