Which button is for the cold air in Lexus?

2 Answers
Rudy
07/24/25 6:05pm
The cold air button in Lexus is the AUTO button. Below are detailed introductions about it: 1. Introduction One: The Lexus LS is the only D-segment car in the Lexus lineup, perfectly integrating comfort, powerful performance, excellent handling, and safety. 2. Introduction Two: The grand and smooth exterior design, along with numerous user-friendly interior features, fully embodies the Lexus L-finesse, elegance, and understated design philosophy. 3. Introduction Three: The Lexus LS is equipped with a 4.6 to 5.0-liter V8 engine, paired with an 8-speed automatic transmission.
Was this review help?
15
0
Share
ChloeLee
08/11/25 10:01am
Turning on the cold air in a Lexus is actually quite simple. I often drive my own car and found that you just need to press the button with the snowflake icon or labeled A/C. This button is usually located on the climate control panel, right next to the temperature knob. My routine is to start the car, wait a moment for the system to warm up, then press the A/C button to activate the compressor, and the cold air will start blowing. If it's not cold enough, check the temperature setting and turn it toward the blue side or lower. Sometimes when the cabin is too hot, I use the face vent mode to speed up cooling. Also, remember to regularly inspect the AC system, such as checking if the refrigerant is sufficient, to avoid discomfort during summer drives. If the button malfunctions, check the fuse or visit a dealership for service to prevent minor issues from escalating. In short, developing a habit of adjusting the temperature every time you get in the car ensures a more comfortable and safer drive.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

Is it necessary to deal with rust on the steering column?

Rust on the car's steering column is a normal phenomenon. Additional information is as follows: 1. Steering column: The steering column is the component that connects the steering wheel and the steering gear in the steering system. Through the steering column, the driver transmits torque to the steering gear, driving the steering gear to achieve steering. Common types of steering columns include hydraulic power steering columns, electro-hydraulic power steering columns, and electric power steering columns, each with different systems. 2. Steering system: A series of devices used to change or maintain the direction of a car's movement, whether forward or backward, are called the car's steering system. The function of the car's steering system is to control the direction of the car's movement according to the driver's wishes. The car's steering system is crucial to the safety of the vehicle, so all components of the steering system are considered safety-critical parts. Both the car's steering system and braking system are two systems that must be given utmost importance for vehicle safety.
12
4
Share

How to Remove the Driver's Side Door Panel of the Lavida?

Method for removing the driver's side door panel of the Lavida: 1. Take out a flathead screwdriver and first remove the control panel with wiring harness; 2. After prying off the control panel, you will see a screw fixed to the door trim panel, remove this screw; 3. Take out a flathead screwdriver and remove the small decorative panel on the inner door trim, where you will also find a screw securing the inner door trim panel, remove it with a T30 Torx bit; 4. Take out a flathead screwdriver and gently pry from the edge between the door panel and the inner door trim, releasing the clips one by one to separate them from the door panel; 5. Then remove the screws at the bottom of the door, use the screwdriver to pry open a gap from the bottom, pull outward with your hand, and finally lift upward to remove the door panel. The Lavida is a sedan produced by Shanghai Volkswagen, which not only maintains the excellent quality of German design but also incorporates many aesthetic concepts reflecting traditional Chinese culture and cutting-edge design elements.
8
1
Share

Is the GM L2B One of the Top Ten Engines?

GM L2B is one of the top ten engines. Models Equipped: The L2B series engine is developed by General Motors in the United States and is equipped in models such as the Excelle, New Excelle GT, Baojun 730, Classic Cruze, and Wuling Rongguang. Performance: The L2B engine also delivers strong power. For example, the new Lechi equipped with this engine achieves nearly 1.4L displacement power with a 1.2L displacement. The maximum power reaches 52.2KW. Low Fuel Consumption: While providing high efficiency, the L2B engine has lower fuel consumption, with a combined fuel consumption of only 5.7L per 100 kilometers, making it the best in its class. The engine's 0-100KM acceleration time is only 15.6 seconds, with a top speed of 160 kilometers per hour.
17
3
Share

Can 'Water Vehicles' Be Converted into Regular Vehicles?

'Water vehicles' do not refer to vehicles that have been submerged in water, but rather to smuggled cars or vehicles without proper documentation. These types of vehicles are mostly transported into the country via waterways, hence the common term 'water vehicles.' Such vehicles typically have unclear origins and pose significant safety hazards, which is why the government prohibits them from being registered. Below is an introduction to the specific details: 1. Fake Registration: Modifying the engine number and chassis number of a 'water vehicle' through laser engraving to make it appear as a legal vehicle for road use. 2. Consequences of Illegal Road Use: According to Article 96 of the 'Road Traffic Safety Law of the People's Republic of China,' driving a smuggled or fake-registered vehicle will result in a fine of 5,000 yuan and 15 days of detention. If the vehicle is confirmed to be smuggled, it will be confiscated in accordance with the 'Notice of the General Office of the State Council on Strengthening the Management of Imported Vehicle License Plates.'
2
2
Share

Does shifting into neutral (N) while driving an automatic car and then turning off the engine have any impact?

Turning off an automatic car in neutral (N) gear does not cause any harm to the vehicle. On the contrary, when the engine is turned off in N gear, the transmission has already stopped rotating. Therefore, shifting from N to P (park) will not create any impact on the vehicle, even if it passes through R (reverse) gear. Under normal circumstances, even if the engine is running, shifting from N to P will not cause any shock to the transmission. Additional information about automatic transmissions is as follows: 1. Introduction: An automatic transmission, as the name suggests, eliminates the need for the driver to manually shift gears. The vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Typically, automatic cars have six gear positions, arranged from top to bottom as: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low). 2. Principle: An automatic transmission uses planetary gear mechanisms to shift gears. It automatically adjusts the gear ratio based on throttle pedal input and vehicle speed, allowing the driver to control speed solely by operating the accelerator pedal.
15
4
Share

Should the brake be released slowly or directly when starting an automatic transmission car?

If the road ahead is flat and clear, you can completely release the foot brake at once and then accelerate to start; if the road conditions ahead are complex and crowded, with people, vehicles, or obstacles, or on a steep slope, you should not release the brake all at once. Instead, you need to release it slowly and gradually in a "tentative" manner, mainly to prevent the car from speeding out of control and causing an accident during startup. Additional information about automatic transmission is as follows: 1. Introduction: Automatic transmission, as the name suggests, does not require the driver to manually shift gears. The vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. Generally, there are six gear positions on an automatic transmission car, from top to bottom: P, R, N, D, S, L. 2. Principle: The automatic transmission uses planetary gear mechanisms to shift gears. It can automatically shift gears based on the degree of the accelerator pedal and changes in vehicle speed. The driver only needs to control the speed by operating the accelerator pedal.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.