Which button is for Bluetooth in Toyota cars?

1 Answers
Zachary
07/30/25 10:38am
Toyota cars do not have a physical button for Bluetooth; you can only turn on Bluetooth through the central control screen. How to use Bluetooth: To use car Bluetooth, first turn on the car's Bluetooth, then press the multifunction button on the car's Bluetooth until you see the indicator light flash. Next, enable the Bluetooth function on your phone and search for nearby Bluetooth devices. Finally, once the Bluetooth device is found, select the device to connect, press confirm, and you will be connected to the car's Bluetooth. Functions of Bluetooth: The function of car Bluetooth is to automatically identify mobile phones, allowing connection without cables or phone holders. The owner can control the phone without touching it, even keeping both hands on the steering wheel, using voice commands to answer or make calls. Users can make calls through the car's audio system.
Was this review help?
16
4
Share
More Forum Discussions

Can the rearview mirror heating be modified?

Rearview mirror heating can be modified. However, the wiring must comply with safety standards and should not interfere with other critical driving circuits. Normally, if there is a need to retrofit heated mirrors, it is best to have a professional handle the installation. Principle of rearview mirror heating: The mirror lenses on both sides are equipped with heating elements (heating films). During rainy or snowy weather, when the driver activates the rearview mirror heating function, these heating elements quickly warm up to a set temperature (typically between 35-60°C) within minutes, effectively defogging and defrosting the mirrors. Rearview mirror heating switch: Knob-type switch: Located on the driver's side door, there is a knob with several symbols—L, 0, R, and a heating symbol (depicted as a square frame containing three upward-curving arrows). Turning the knob to the heating symbol activates the rearview mirror heating function. Button-type switch: Found on the control panel, it features the same square frame with three upward-curving arrows. Pressing the button turns on the rearview mirror heating function.
19
1
Share

Do Connecting Rod Bearings Need to Be Replaced When Changing the Connecting Rod?

If replacing the crankshaft connecting rod, both the main bearings and connecting rod bearings must be replaced. Connecting Rod: The connecting rod consists of components such as the connecting rod body, connecting rod cap, connecting rod bolts, and connecting rod bearings. The connecting rod body and cap can be divided into the small end, shank, and big end. The small end is used to install the piston pin to connect to the piston. The shank is typically designed with an "I" or "H" cross-section to reduce mass while meeting strength and stiffness requirements. The big end connects to the crankshaft's connecting rod journal. It is generally made as a split type, with the separated half called the connecting rod cap, both connected by bolts. The connecting rod bearings are installed in the big end housing and paired with the crankshaft's connecting rod journal, forming one of the most critical fits in the engine. Function: Its function is to transmit the force from the piston to the crankshaft and convert the piston's reciprocating motion into the crankshaft's rotational motion.
14
0
Share

How many points are deducted for violating traffic signals?

Violating traffic signals results in a deduction of 6 points. Violation scenarios: Violations of traffic signals include motor vehicle signals, non-motor vehicle signals, pedestrian crossing signals, lane signals, directional indicator signals, flashing warning signals, and railway crossing signals; Legal basis: According to Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law," when the green light is on for motor vehicle and non-motor vehicle signals, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians; vehicles that have already crossed the stop line when the yellow light is on may continue to proceed; vehicles are prohibited from proceeding when the red light is on. At intersections without non-motor vehicle or pedestrian crossing signals, non-motor vehicles and pedestrians should follow the motor vehicle signal indications. Vehicles turning right at a red light may proceed provided they do not obstruct the passage of other vehicles or pedestrians.
17
0
Share

Can I turn left into the middle lane?

You cannot turn left into the middle lane; you should turn into the leftmost lane. Reasons for turning into the leftmost lane: Generally, in a three-lane road, the rightmost lane is for right turns, the middle lane is for going straight, and the leftmost lane is for left turns. Therefore, when making a left turn on a three-lane road, you should use the leftmost lane. Priority for left-turning vehicles: When there are traffic signs or markings indicating priority, the vehicle with the right of way should proceed first. In the absence of traffic signs or markings, vehicles should stop and observe before entering the intersection, yielding to vehicles coming from the right. Turning vehicles must yield to vehicles going straight, and vehicles turning right from the opposite direction must yield to vehicles turning left.
18
0
Share

Will changing only the oil filter cause oil leakage?

Changing only the oil filter will cause oil leakage. If the oil is not drained before removing the filter, the oil will gush out. At this point, even if you immediately install a new filter, it will be too late, and a significant amount of oil will have already leaked. Precautions for replacing the oil filter: Generally, when replacing the oil filter, the engine oil should also be replaced as part of the vehicle's maintenance routine. Vehicle maintenance is typically performed according to the schedule specified by the manufacturer before the car leaves the factory. The maintenance intervals may vary depending on the vehicle's usage and type. Classification of oil filters: Oil filters can be categorized by structure into replaceable filters, spin-on filters, and centrifugal filters. The filtering materials used include filter paper, felt, metal mesh, etc. The oil filter is located in the engine's lubrication system, with the upper part connected to the oil pump and the lower part connected to various components within the engine that require lubrication. The function of the oil filter in the engine is to filter out harmful substances from the oil coming from the oil pan, providing clean oil to components such as the turbocharger in the engine, thereby lubricating and cleaning them and extending their service life. When replacing the engine oil, it is necessary to replace the oil filter as well, because changing the oil without replacing the filter can easily contaminate the new oil, shortening its usable life. However, if the filter is not dirty, the impact is minimal.
3
0
Share

Can a Blue License Plate for Motorcycles be Changed to a Yellow One?

Motorcycle blue license plates cannot be changed to yellow ones. Differences between blue and yellow license plates for motorcycles: Motorcycles with an engine displacement greater than 50ml must have yellow plates, while those below 50ml have blue plates. The color of the license plate is not determined by whether the motorcycle is a scooter or a standard bike, but by the engine displacement. Blue plates are for light motorcycles, also known as mopeds or assistive vehicles, while yellow plates are for standard or heavy motorcycles. There are age restrictions: individuals aged 70 or older cannot ride motorcycles with yellow plates, and their license will be downgraded to an F-class, allowing them to only ride motorcycles with blue plates. Motorcycles with yellow plates are allowed to carry one passenger, while all motorcycles with blue plates are prohibited from carrying passengers. License requirements: Operating any motor vehicle requires a corresponding driver's license. Blue plate motorcycles with an engine displacement below 50ml can be driven with an F-class license, while yellow plate motorcycles require an E-class or D-class license.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.