Which Button is for Bluetooth in the Older Jetta Model?

1 Answers
AugustLee
07/29/25 11:56pm
The Bluetooth activation button for the older Jetta model is located on the center console. Below is a related introduction to the Jetta car: Power: Equipped with a 1.4L EA211 engine, it reaches a maximum power output of 66kW at 5500 rpm and a maximum torque of 132N·m at 3800 rpm. The small-displacement engine not only reduces user costs but also achieves energy efficiency and environmental protection. Interior: The black interior features gray stitching on the seats, steering wheel, and handbrake, creating a contrasting effect that breaks the monotony of the black interior.
Was this review help?
4
0
Share
More Forum Discussions

Can I drive on the highway with a driver's license less than one year old?

Drivers with a license less than one year old must be accompanied by a licensed driver with at least 3 years of experience to drive on the highway. Here is some information about driving on the highway with temporary license plates: 1. Cross-administrative temporary license plates: Vehicles with cross-administrative temporary license plates can drive across provinces, whether within the province or outside, without any issues, and there is no need to worry about driving on the highway. Cross-provincial temporary license plates are visually distinct from non-cross-provincial ones, with cross-provincial plates featuring brown-yellow backgrounds and black text. 2. Test vehicle temporary license plates: Test vehicle temporary license plates are generally only used for internal test vehicles by car manufacturers or media test vehicles. There are more restrictions on driving with test vehicle temporary license plates. Normally, test vehicle temporary license plates will specify restricted roads, and they are usually prohibited from driving on highways and ring roads.
3
3
Share

Where is the OBD interface of Dongfeng Peugeot 307?

There are mainly two OBD diagnostic connectors for Dongfeng Peugeot 307: 1. Under the ashtray, there is a rubber cover. Remove the cover to see the trapezoidal green diagnostic interface. 2. In addition, there is another one in the groove in front of the gear lever. Lift the leather pad above it, and you will find another one inside. The following is an introduction to OBD: (1) OBD is translated as "On-Board Diagnostics" in Chinese. The OBD diagnostic socket is the bridge (interface) connecting the computer to the vehicle diagnostic system. (2) OBD can read the fault codes from the PCM through certain programs. (3) According to the prompts of the fault codes, maintenance personnel can quickly and accurately determine the nature and location of the fault.
13
4
Share

What damage does refueling without turning off the engine cause to the car?

Refueling without turning off the engine generally does not cause any adverse consequences to the vehicle, but it poses certain safety hazards. The vehicle's electrical equipment remains operational, and the engine is running at high temperatures. If there is any electrical leakage, it could potentially lead to a fire. Therefore, when refueling the car, it is essential to remember to turn off the engine and power, and only restart the vehicle after refueling is complete and the fuel tank cap is securely closed. Below is more information on refueling precautions: 1. Never refuel the car before turning off the engine. 2. If the attendant has not turned off the fuel nozzle, the driver must never start the car, as this could easily cause a fire. 3. It is best not to refuel during thunderstorms. This is also a safety consideration to prevent lightning strikes and avoid fires. Since automotive fuel is highly flammable, during refueling, flammable fuel vapors can easily disperse into the surrounding air. If struck by lightning, the consequences would be unimaginable.
7
3
Share

Why Can't the Hydraulic Valve Lifter in a Car Be Pressed Down by Hand?

There are several reasons why the hydraulic valve lifter in a car cannot be pressed down by hand: 1. Excessive oil level: If the engine oil level is too high or too low, it may cause aerated oil to enter the hydraulic lifter, forming an elastic body and resulting in valve tapping noise. 2. Low oil pressure: Insufficient lubrication in the hydraulic lifter allows air to enter, causing valve tapping noise. 3. Prolonged engine inactivity: This can lead to excessive compression of the hydraulic lifter, and upon restarting, insufficient oil replenishment may allow air to enter, resulting in valve tapping noise. 4. Hydraulic lifter failure: When valve tapping noise occurs in an engine equipped with hydraulic lifters, the oil level should be checked first. If the oil level is too low, it should be topped up to the standard height.
15
0
Share

Does the Dash Cam Record Automatically?

After the vehicle is parked and turned off, the dash cam will automatically shut down and enter a low-power sleep mode. However, once it detects a collision or movement of objects in front, it will immediately wake up and capture the surrounding footage. This ensures both vehicle parking safety monitoring and energy conservation, preventing the risk of battery drain. Below is more information about dash cams: 1. A dash cam refers to a device that records images, sounds, and related information during vehicle operation. It essentially functions as an automotive camera, capable of high-definition recording to fully document the vehicle's journey, including images, sounds, and vehicle status data. 2. Dash cams with parking monitoring features can continue recording after the vehicle is turned off, but typically only for a few minutes, as the dash cam is not charging when the vehicle is off. The parking monitoring function of dash cams comes in two types: one is continuous recording, and the other is short-duration recording triggered only when the vehicle experiences vibrations.
16
4
Share

What is the principle of the Accord hybrid car?

The Accord hybrid system has three driving modes: pure electric, hybrid, and internal combustion engine driving. In electric mode, the motor obtains energy from the lithium battery pack and drives the vehicle alone. The maximum speed is 60 mph, and the maximum driving range is not high. Once the battery energy is exhausted, it automatically switches to hybrid mode. The following is an introduction to the hybrid system: 1. Hybrid mode: The working principle of the Accord hybrid is similar to that of the Chevrolet Volt. The 2.0-liter gasoline engine drives the generator to produce electricity, which is then used for the electric motor. Honda refers to the combination of the generator and the motor as a dual motor. In this mode, the vehicle is driven solely by the electric motor. Internal combustion engine driving mode: In this mode, the motor is decoupled from the transmission system. 2. The engine directly drives the wheels through a single-speed transmission. According to Honda, the efficiency of this single-speed transmission is similar to that of a 6-speed manual transmission under highway conditions. Atkinson cycle engines are also used in hybrid vehicles from Ford and Toyota.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.