Which button controls the heating in the 8th generation Accord?

1 Answers
Brianna
07/29/25 11:16am
To activate the heating in the 8th generation Accord, simply press the AUTO button. Introduction to the heating system: The heating system is part of the air conditioning, specifically the warm air conditioning. The so-called automatic air conditioning includes control for both cooling and heating. What 'automatic' means is that once you set the desired temperature, if the interior temperature is lower than the set value, the automatic air conditioning system will control the vents to blow warm air, heating the interior to the set temperature. Conversely, if the interior temperature is higher than the set value, the computer will automatically turn on the cooling system to blow cold air from the vents, lowering the interior temperature to the set value. Heating system precautions: However, it's important to note that you should first ensure your heating system is functioning properly.
Was this review help?
18
2
Share
More Forum Discussions

Which license should be obtained for heavy motorcycles?

Heavy motorcycles require a motorcycle license, either Class D or Class E. Class E is for two-wheeled motorcycles, while Class D includes Class E and also allows driving three-wheeled motorcycles. If you already have a C1 license and wish to obtain a Class D or E license, you need to apply for an additional license. You must have held the C1 license for at least one year before applying. The motorcycle license test includes the following items: starting, straight driving, lane changing, passing intersections, pulling over, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, and making U-turns. A driver's license, also known as a driving permit, is a document issued by the government transportation department to individuals qualified to drive, usually in the form of a card. To obtain a driver's license, you must meet the minimum age requirement and pass a driving test. The license typically specifies the types of motor vehicles the holder is permitted to drive, such as motorcycles, passenger cars, trucks, buses, etc.
13
5
Share

Should an automatic transmission be parked in N or P gear?

An automatic transmission can be parked in either N or P gear. The correct method for parking an automatic transmission vehicle is: 1. First, use the foot brake to bring the vehicle to a complete stop, then shift the gear from D to N; 2. Engage the handbrake, release the foot brake, and then turn off the engine; 3. Do not immediately turn off the power after shutting off the engine—this is to ensure the vehicle is completely stationary under the handbrake; 4. Press the foot brake again, shift the gear from N to P, release the foot brake, and then turn off the power and remove the key. An automatic transmission generally refers to a car's automatic gear-shifting mechanism, where the control system of the automatic transmission selects the appropriate gear based on the engine's speed and load during driving, replacing the driver's subjective judgment and gear-shifting operation. A typical automatic transmission vehicle has six gear positions, from top to bottom: P, R, N, D, S, L.
15
0
Share

How to Open the Engine Hood of the Sylphy?

The method to open the engine hood of the Sylphy: The switch for the engine hood is located below the steering wheel. Below the steering wheel, you can find the switches for both the fuel tank cap and the engine hood. Gently press the switch to open the engine hood. After opening the engine hood, you need to use the hydraulic rod underneath to support it, then prop it up onto the engine hood. The Sylphy is a sedan series launched by Dongfeng Nissan Passenger Vehicle Company. The dimensions of this car are 4665mm in length, 1700mm in width, and 1505mm in height, with a wheelbase of 2700mm. The Sylphy adopts a front-engine, front-wheel-drive layout, equipped with an all-aluminum inline 4-cylinder engine, paired with a CVT intelligent continuously variable transmission and a 5-speed manual transmission. The active safety features of this car include: ABS anti-lock braking system, ESS emergency brake alert system, EBD electronic brake-force distribution system, and TPMS tire pressure monitoring system.
18
3
Share

What is the fuel tank capacity of the Xiali N7?

The fuel tank capacity of the Xiali N7 is 37L. The fuel tank is a container for storing fuel in a vehicle, and it is also a specialized container for storing hydraulic oil or hydraulic fluid in a hydraulic system. It can be divided into two types: open fuel tanks and closed fuel tanks. The fuel tank must have a sufficiently large volume. To maintain the cleanliness of the oil, the fuel tank should have a sealed cover around its perimeter, equipped with an air filter. The bottom of the fuel tank should be at least 150mm above the ground, and sufficient attention should be paid to the anti-corrosion treatment of the inner surface of the tank. The Xiali N7 is a compact car under Tianjin FAW, equipped with a 1.3L naturally aspirated engine across the entire lineup, delivering a maximum power of 67kW and a maximum torque of 120Nm. The engine reaches its maximum power at 6000 rpm and its maximum torque at 4400 rpm.
17
4
Share

What are the tips for driving in snowy weather?

The tips for driving in snowy weather are as follows: 1. Maintain a low driving speed: In winter, the adhesion coefficient of snowy roads is very low, making it easier for wheels to slip and increasing driving hazards. Therefore, driving speed should be reduced to ensure safety. Maintain a steady speed while driving and avoid sudden acceleration. When accelerating or decelerating, press or release the throttle gently to prevent the driving wheels from slipping due to sudden changes in speed. 2. Increase the following distance: Driving on icy or snowy roads increases the risk of rear-end collisions, so it is essential to increase the following distance. The following distance should be 4 to 5 times greater than on dry, snow-free roads. Snowy surfaces offer very little resistance, only about a quarter of that on dry asphalt roads. When using the foot brake, apply it gently in a pumping motion (light press and release) rather than stomping on it. Vehicles without ABS should take extra care to prevent skidding. 3. Stay calm and composed: If the vehicle starts to skid, do not panic. Gently steer the wheel in the direction of the skid. Once the vehicle stabilizes, apply the brakes lightly until the situation is fully under control.
15
1
Share

What is the normal pressure standard for automotive air conditioning R134a?

Automotive air conditioning R134a normal pressure standard: Low-pressure side: 104kPa-201kPa, High-pressure side: 1785kPa to 1916kPa. Here is relevant information about automotive air conditioning pressure: 1. Description: At idle speed (engine 700-900rpm), if the ambient temperature is high, such as under direct summer sunlight, the high pressure may be slightly higher, up to about 2.5-2.8 MPa, but generally should not exceed 3.1 MPa. 2. Precautions: After the air conditioner has been running normally for a while, the air blowing on you should feel cool and quickly reach the set temperature. The outdoor compressor should work intermittently like a refrigerator - this indicates normal operation. Otherwise, refrigerant may be needed. Use a thermometer to measure the temperature difference between the air inlet and outlet of the indoor unit. A difference of more than 8°C is normal - the greater the difference, the better the air conditioner is working (good performance can reach about 15°C). If the difference is below 8°C, refrigerant may need to be added.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.