Which button adjusts the temperature of the car air conditioner?

1 Answers
SanHarrison
07/29/25 7:19pm
Temperature adjustment buttons are usually marked with a "thermometer" icon or have red and blue color indicators on both sides. Rotating the knob towards the red zone gradually increases the temperature. Below is relevant information: 1. Car Air Conditioning: The car air conditioning system (air conditioning device) is used to regulate and control the temperature, humidity, air cleanliness, and airflow within the vehicle cabin to optimal conditions, providing passengers with a comfortable environment and reducing travel fatigue. It also creates favorable working conditions for the driver, playing a crucial role in ensuring safe driving. 2. Types of Air Conditioning: Based on the driving method, it can be divided into: Independent type (uses a dedicated engine to drive the compressor, offering large cooling capacity and stable operation, but with higher costs, larger size and weight, mostly used in large and medium-sized buses) and Non-independent type (the air conditioning compressor is driven by the car engine, with cooling performance significantly affected by the engine operation, resulting in poorer stability, mostly used in small buses and cars).
Was this review help?
20
5
Share
More Forum Discussions

What is the fuel tank capacity of the Porsche Cayenne in liters?

The fuel tank capacity of the Porsche Cayenne is 90 liters. This data is officially released, and owners who have purchased a Porsche Cayenne can also check it on the vehicle's configuration sheet. The recommended fuel grade for the Porsche Cayenne is 95, with a fuel consumption of 8.9 to 11.3L per 100 kilometers. A full tank can cover a distance of 796 to 1011 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel in the tank. Generally, this is observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space ensures that the fuel can expand when the temperature rises without overflowing the tank. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
6
0
Share

What are the differences between the domestic Polo and the authentic Polo?

The differences between the domestic Polo and the authentic Polo are as follows: 1. Different appearance: The headlights of the imported POLO differ from the domestic version. Although the outer contours of the headlights are the same, the internal structure is quite distinct from the domestic Shanghai Volkswagen POLO, with differences in the distribution of low and high beams and the shape of the rear reflectors. The upper outer part of the imported Polo's rearview mirrors features a slender transparent lamp cover, which becomes quite noticeable when the turn signal is activated. This feature is absent in the domestic Volkswagen Polo. 2. Different configurations: The imported Polo does not have an antenna, although it is possible that in Europe, the antenna is an optional feature. The rear window wiper—recall that older POLO models used frameless wipers, while the latest domestic generation switched to framed wipers—shows that in the case of the imported Polo, Europe currently has no intention of downgrading this component. The rear window is generally more flat.
20
0
Share

Is the warranty guaranteed if I don't buy a car from a 4S store?

If you don't buy a car from a 4S store, the warranty may not be guaranteed. Here are the reasons why it is recommended to buy a car from a 4S store: 1. After-sales service: Buying a car from a 4S store ensures excellent after-sales service, which may not be guaranteed elsewhere. Moreover, professional personnel guarantee the quality of repairs. All employees in 4S store after-sales services are certified by the manufacturer's evaluation and have professional qualifications. 2. Maintenance procedures: Maintenance procedures in 4S stores are quite strict. There are clear regulations on how to maintain the car after a certain mileage, which parts to replace, and the charging standards for each procedure. There is a transparent workshop where every procedure and operation is visible to customers. If some parts need to be replaced before the specified usage period, the 4S store will obtain the owner's consent before proceeding with repairs or replacements. The replaced parts from maintenance are shown to the customer before payment.
5
5
Share

How to reset the tire fault light on an Audi A3?

Audi A3 tire fault light reset method is very simple: just press and hold the switch to reset. The tire fault light monitors tire pressure. If the pressure is uneven or there is a tire leak, the pressure light will illuminate as a warning. Therefore, if the tire fault light comes on, it is essential to check whether the tire is damaged and whether the tire pressure is normal. Below is relevant information about tire pressure: 1. Low pressure: Low pressure increases tire body deformation, making the tire side prone to cracks and causing flexing motion, leading to excessive heat, rubber aging, fatigue of the cord layer, and cord breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear. 2. High pressure: Excessive pressure causes excessive stretching deformation of the tire cords, reducing the tire body's elasticity and increasing the load on the car while driving. In case of impact, it may lead to internal cracks and blowouts. Additionally, high pressure accelerates tread wear and reduces puncture resistance.
4
1
Share

Can a car tire with a small cut in the rubber be repaired?

If a car tire has a small cut in the rubber but the cord layer is not damaged, it can be repaired. Below is relevant information about car tire damage: 1. Precautions: If a piece of rubber is missing from the tire sidewall, it is recommended not to repair it. Car tires are mostly radial tires, mainly composed of cord layers, steel belts, and rubber. The cord layers consist of transverse and longitudinal cords, whose main function is to bear the load, while the rubber's primary role is sealing and flexible deformation. The weakest part is the sidewall. If a repair is forced, the adhesive patch on the sidewall may fall off due to the constant deformation and recovery during rotation. If a mushroom plug repair is used, it may cause the sidewall cords to break, leading to bulging. 2. Explanation: A tire with sidewall damage can be temporarily used as a spare tire after repair, but long-term use is not recommended, and high-speed driving is not advised. When repairing a sidewall-damaged tire, the repair technician will also inform you of potential safety hazards and advise against long-term use. The sidewall of a tire is only protected by rubber material, unlike the higher protection strength of the tire's tread base.
18
5
Share

How Long Does It Take to Get License Plates for a Used Car?

It typically takes about one business day to obtain license plates for a used car. Here are three tips for identifying license plates: 1. Observe the font: While the font of motor vehicle license plates follows a national standard, they are not uniformly produced nationwide. Therefore, the size and structure of the fonts may vary, but each province has its own characteristics in license plate production. Upon close inspection, these differences can be discerned. Genuine plates, i.e., officially issued ones, feature uniquely designed fonts with intellectual property rights, offering a visually pleasing appearance. Counterfeit plates often have a bluish or yellowish background color, with fonts that appear either too thin or too thick, or exhibit irregularities at the curves. 2. Examine the coloring: The quality and composition of the paint used for the base of the plate can differ, resulting in variations between genuine and counterfeit plates. Genuine plates use imported paint applied through a roller process, ensuring even coloring only on the raised parts. Counterfeit plates are often hand-painted with a brush, leading to uneven coloring and visible brush strokes. Additionally, paint may be found in recessed areas, giving a rough overall appearance. 3. Check the reflectivity: Genuine plates do not reflect sunlight but do reflect under direct artificial light. Counterfeit plates may appear shiny at certain angles under sunlight but remain dull and non-reflective under direct artificial light.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.