Which brand uses the 'Qin' character as its logo?

1 Answers
LeDaniella
07/30/25 3:46am
The 'Qin' logo belongs to the Qin series under BYD. BYD is currently the only brand that uniquely uses Chinese characters and dynastic names as elements to name its cars and as logos, such as 'Qin', 'Song', 'Yuan', 'Tang', and the latest 'Han'. Therefore, when you see a dynastic name used as a car logo on the street, it is generally a BYD model. Moreover, not only are the logo and car name in Chinese characters, but even the interior labels use Chinese fonts. Here is some additional information: As the first product of BYD's Dynasty series, the Qin holds significant importance for BYD. Although its popularity is not as high as the Qin Pro now, it still follows a solid low-price strategy. The base model, with the lowest guide price, is equipped with many practical features such as traction control, vehicle stability, keyless entry/start, etc. Compared to higher-tier models, it doesn't lack anything that would substantially affect driving. Currently, there are also promotions, making the base Qin model worth considering for consumers in fourth- and fifth-tier cities for commuting or ride-hailing services.
Was this review help?
11
0
Share
More Forum Discussions

Is it still necessary to display the annual inspection sticker now?

Now, it is not required to display the annual inspection sticker. Here are the relevant details about vehicle annual inspection: Inspection Reform: Now, the vehicle inspection information is interconnected online. When traffic police conduct roadside checks, they can use PDAs to access the vehicle monitoring system. If an approaching vehicle has not undergone the annual inspection, the system will provide an early warning, eliminating the need for police to visually verify the inspection information. Changes in Annual Inspection: Currently, there is no need to obtain a paper annual inspection sticker, meaning it does not have to be affixed to the vehicle's front windshield. However, it is important to note that vehicle owners must apply for an electronic inspection qualification mark every two years. Since the paper annual inspection sticker has been replaced by the electronic inspection qualification mark, vehicles that pass the regular inspection will still receive a paper annual inspection sticker from the inspection institution. Additionally, the electronic mark can be viewed on a mobile phone, and the display of the paper sticker is optional.
1
1
Share

What is the maximum charging current for a car battery?

The charging current for a car battery is related to its capacity, and a current of 6A can be used for charging. Charging time for the battery: If the battery is completely drained, it typically takes about 8 to 10 hours to charge. If a lower current is used for charging, it may take around 12 hours to fully charge. However, it's important to note that it's best not to wait until the battery is completely dead before charging. It is recommended to charge when the battery still has about 70% of its capacity remaining, in which case it only takes 6 to 8 hours to fully charge. If the battery voltage is too low, the car may have difficulty starting or may not start at all. Conversely, if the battery voltage is excessively high, it may damage the battery. Regularly check the battery voltage. If the voltage is below 11.8V, it indicates insufficient voltage, and you should turn off electrical devices and start the car to charge the battery. If the voltage drops below 10.8V, it means the battery is severely depleted, and a battery charger should be used for charging.
13
0
Share

What is the content of the motorcycle charger wiring tutorial?

Motorcycle charger wiring tutorial: Wiring: Attach the two metal clips from the charger output to the battery terminals. The red clip is the positive terminal and should be attached to the positive terminal of the battery. The black (or sometimes green or blue) clip is the negative terminal and should be attached to the negative terminal of the battery. Remove all the caps from the battery to prevent the buildup of gas bubbles during charging, which could cause the battery case to burst. Voltage adjustment: Set the charger output voltage to match the rated voltage of the battery. Most motorcycle batteries are 12 volts, but some are 6 volts. Power connection: Set the charging level to zero and then connect the charger to the power source. Increasing the charging level: Gradually increase the charging level based on the desired charging speed. The lowest level charges the slowest but provides the most complete charge. Power disconnection: When charging is complete, bubbles will form in the battery acid, indicating that the battery is fully charged. Return the charging level to zero, disconnect the charger from the power source, and remove the metal clips.
8
2
Share

How Many Tons is the Cummins 3.8 Suitable for Pulling?

Cummins 3.8 is suitable for pulling loads of around 10 tons. The optimal range is between 9 to 10 tons, and it should not exceed 11 tons. If it exceeds 11 tons, it may feel like a small horse pulling a heavy cart. The same engine model installed in different vehicles may have different manufacturer calibrations, which mainly refer to the engine's intake and exhaust, ignition timing advance, and fuel injection timing. Below is an introduction to the Cummins 3.8 engine: 1. Horsepower: The Cummins 3.8 has a horsepower of 154 PS. Horsepower is a unit of power, measuring how quickly work is done. Since it relates to the speed of work, the vehicle's top speed is determined by maximum horsepower, while torque determines whether the vehicle can pull heavy loads. 2. Output Power: The engine's horsepower refers to its output capacity (work done), i.e., output power. Output power is the most important parameter for measuring vehicle performance and is used to evaluate engine performance.
12
5
Share

What is the C-class for a small car driving license?

There are two types of small car driving licenses: C1 and C2. C1 is a manual transmission license, which allows driving small and micro passenger vehicles, light and micro cargo vehicles, as well as light and micro special-purpose vehicles. It also permits driving vehicles covered by C2, C3, and C4 licenses. C2 is an automatic transmission license, allowing the operation of small and micro automatic transmission passenger vehicles and light and micro automatic transmission cargo vehicles. The process for obtaining a C1 or C2 small car driving license includes: 1. Bring the original and a copy of your ID card to the driving school registration point to enroll and wait for the arrangement of theoretical study time (non-local students need a temporary residence permit, which the driving school can assist with); 2. Undergo a physical examination, including ECG, blood pressure, height, weight, hearing, grip strength, back strength, vision, and color vision tests; 3. Pass the exams (all four subjects must be passed); 4. Collect the license by presenting your ID card at the registration point.
19
5
Share

How to Determine China V or China VI Emission Standards?

Methods to determine China V or China VI emission standards are as follows: 1. Check the information on the vehicle certificate: Review the vehicle certificate provided by the dealer at the time of delivery, which normally contains information related to 'emission standards.' 2. Consult the environmental information list: Similar to the vehicle certificate, the delivery documents include an environmental information list. Check the 'emission stage' separately listed in the first part of the vehicle information. 3. Vehicle emission standards on the environmental website: Query through the environmental website by entering the vehicle's complete model number, which is marked on the vehicle's nameplate.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.