Which brand of tires does the Changan Oushang X7 use?

1 Answers
OMadeline
07/30/25 1:09am
Changan Oushang X7 uses Linglong tires. The tire size for the automatic model is 235/45R20, and for the manual model, it is 235/50R19. Shandong Linglong Tire Co., Ltd. is ranked among the world's top 12 tire manufacturers and is the second-largest tire producer in China. The company has 7 R&D institutions, 7 production bases, and over 17,000 employees globally. Its products are widely used in passenger cars, commercial vehicles, and construction machinery vehicles, forming a diversified brand system including Linglong, ATLAS, LEO, and EVOLUXX, catering to different global market segments. For the tires of the Changan Oushang X7, the following points should be noted during daily use: Regularly inspect the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallow. If the tread is worn out, it loses its drainage and anti-skid functions, significantly reducing the vehicle's performance. Small cracks may pose a risk of tire blowouts at high speeds. Additionally, promptly remove pebbles lodged in the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, avoid turning the steering wheel, as this can accelerate tire wear. Do not splash water to cool down. In hot weather or during high-speed driving, tires are prone to overheating, and the air pressure may increase. In such cases, park to allow the tires to cool naturally. Avoid releasing air to reduce pressure or splashing water to cool the tires, as this can lead to abnormal aging of the tread rubber. Avoid sudden braking. Minimize frequent and hard braking to prevent accelerated tread wear caused by dragging between the tires and the road.
Was this review help?
4
3
Share
More Forum Discussions

What is the function of the Teana water pump vent?

The function of the Teana water pump vent is to exhaust high-temperature air and intake low-temperature air. Automotive engines widely use centrifugal water pumps, whose basic structure consists of components such as the water pump housing, connecting plate or pulley, water pump shaft and bearings or integrated shaft bearings, water pump impeller, and water seal device. It is a major component of the vehicle. The Teana has a length, width, and height of 4901mm, 1850mm, and 1450mm respectively, with a wheelbase of 2825mm. The front suspension of the Teana is a MacPherson strut independent suspension, and the rear suspension is a multi-link independent suspension with trapezoidal control arms. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 115kW and a maximum torque of 197Nm, paired with a continuously variable transmission.
9
3
Share

How many years of B2 driver's license are required to upgrade to A1?

B2 driver's license holders with more than 5 years of experience, who have not accumulated 12 penalty points in any of the last five scoring cycles prior to application, can apply to upgrade to A1. Starting from November 20, 2020, the application age range has been adjusted to 22-60 years old, and the minimum requirement for holding a large truck driver's license has been reduced from at least 5 years to 3 years. However, if during the period of holding a B1 license, the applicant has had instances such as drunk driving, failure to undergo annual inspection for three consecutive cycles, or accidents resulting in casualties, they will be ineligible to apply for an A1 license. Generally speaking, upgrading from B2 to A1 involves obtaining a passenger vehicle driver's license, which includes large passenger vehicles A1, B1, and A3. Specifically, A1 refers to large passenger vehicles that are over 6 meters in length or have a certified passenger capacity exceeding 20 people.
20
2
Share

What engine is in the 2010 Premacy?

2010 Premacy was equipped with the HA-VVT-1.6 engine model, delivering a maximum horsepower of 120 hp, maximum power of 88 KW at 6000 rpm, and maximum torque of 150 N·m. The 2010 Premacy engine was domestically produced in China. For daily maintenance of the 2010 Premacy engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and oil filter. The quality of any grade of lubricating oil will deteriorate during use. After a certain mileage, performance degradation can cause various problems for the engine. To avoid failures, change the oil regularly based on usage conditions and maintain an appropriate oil level; As oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through, the filter may burst or the bypass valve may open, allowing dirty oil to return to the lubrication areas, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures proper engine operation but also extends the overall lifespan of the radiator and engine.
1
2
Share

Can Driving License Subject 3 and Subject 4 Be Scheduled Together?

Driving License Subject 3 and Subject 4 cannot be scheduled together. More relevant information is as follows: 1. Scheduling Time: In the C1 license driving skills test, the scheduling of Subject 3 requires an interval of at least 20 days from the passing of Subject 1. Subject 4 is the theoretical part of Subject 3, so Subject 3 and Subject 4 are actually one test. The interval between the two subjects depends on the specific scheduling situation, and there is no mandatory interval requirement in the regulations. 2. Direct Examination: In some places, Subject 4 can be taken immediately after passing Subject 3, while in others, it cannot. The specific situation can be consulted with the driving school where you registered. 3. Examination Time: Subject 4 is the safety and civilization test of Subject 3, and both Subject 3 and Subject 4 are taken on the same day. 4. Examination Sequence: Subject 4 can only be scheduled after passing Subject 3.
19
4
Share

What is the actual fuel consumption of the Geely Borui 1.8T?

There are three models of the Geely Borui 1.8T currently on sale: the 2021 1.8T Pilot Edition, the 2021 1.8T Pilot Edition+, and the 2021 1.8T National Style Edition, all equipped with a 184-horsepower engine. The NEDC fuel consumption is 7.3L per 100 kilometers. The fuel tank capacity of different Geely Borui 1.8T models varies. The distance that can be covered with a full tank of fuel is as follows: For models equipped with the 184-horsepower engine, the fuel tank capacity is 70L, and the distance that can be covered with a full tank is 70/7.3*100=959KM. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, will increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power output, requiring more gasoline to burn and perform work. Cars with greater weight will also have higher fuel consumption because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low, the gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
17
1
Share

Semi-Synthetic or Fully Synthetic Engine Oil?

Using fully synthetic engine oil is generally better for vehicles. Here are the key differences between semi-synthetic and fully synthetic engine oils: 1. Base Oil Differences: Semi-synthetic oils use Group III base oils, while fully synthetic oils are blended from Group III, IV, and V base oils. Fully synthetic oils use higher-grade base oils compared to semi-synthetic oils. Fully synthetic oils offer superior engine cooling and flow characteristics, making them ideal for turbocharged engines which have more complex structures and require better lubrication. 2. Replacement Intervals: Semi-synthetic oils typically need replacement every 6 months or 7,500 kilometers, whereas fully synthetic oils can last up to 1 year or 10,000 kilometers. The actual replacement interval may vary depending on specific conditions. Fully synthetic oils also have better cleaning properties and oxidation resistance than semi-synthetic oils, allowing for longer replacement intervals of about 1 year or 10,000 kilometers. 3. Temperature Performance: Fully synthetic oils perform better across a wider temperature range. Under the same operating conditions, fully synthetic oils can protect the engine with lower viscosity, while semi-synthetic oils have more stringent requirements. For older engines with some wear, semi-synthetic oils, being more viscous, can better coat engine components, providing protection and reducing wear.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.