Which brand of engine oil is specifically used for Land Rover?

2 Answers
Leroy
07/29/25 7:46am
Shell engine oil is used. The viscosity of the engine oil should be selected based on the engine's own condition and the ambient temperature. If the internal components of the engine have small clearances, a lower viscosity (thinner) oil is needed. Conversely, if the clearances are large, a higher viscosity (thicker) oil is required. If the selected oil is too thick, it may cause additional wear on the starter motor, battery, and other components. Below is more related information: Possible reasons for the engine oil warning light to activate: 1. Insufficient engine oil level, which reduces the oil pump's output or causes it to pump air instead of oil, leading to a drop in oil pressure. 2. Overheating of the engine, which can thin the oil, causing it to leak excessively through the clearances and resulting in a drop in oil pressure. 3. Damage to the oil pump components or excessive wear and improper assembly, leading to excessive clearances, which can cause the oil pump to fail to pump oil or pump insufficient oil. 4. Improper clearance between the crankshaft and the main or connecting rod bearings. If the clearance is too tight, oil pressure will increase; if too loose, oil pressure will decrease. 5. Clogging of the oil filter or oil pickup screen can also reduce oil pressure. 6. Malfunction or failure of the pressure relief valve: If the main oil gallery pressure relief valve spring is fatigued, softened, or improperly adjusted, or if the valve seat and ball are worn or stuck by debris and fail to close properly, the oil return flow will increase significantly, causing the main oil gallery pressure to drop. 7. Incorrect selection of engine oil: If the wrong type or grade of oil is used, the engine may experience excessive leakage due to low oil viscosity during operation, leading to a drop in oil pressure. 8. Oil leaks or blockages in the oil lines.
Was this review help?
15
3
Share
EthanRose
08/12/25 11:01am
As a Land Rover owner, I've been driving for several years and always insist on using the oil brands officially recommended by Land Rover, mainly Shell's Helix Ultra series or Castrol's full synthetic oils. They are all labeled as meeting Land Rover specifications like RN17 or similar standards, with viscosity typically being 5W-20 or 5W-30. During maintenance at the 4S店, the technician emphasized that choosing the right oil is crucial, otherwise the engine may become noisier or fuel consumption may increase. Actually, the brand isn't absolutely fixed, but it's essential to ensure the oil meets the ACEA A5/B5 standard, which helps protect the engine and extend its lifespan. Regularly checking the oil level and adhering to the oil change intervals is also very important. Never opt for cheap, off-brand oils to save money, as repairs could end up costing more. Remember, using specialized engine oil ensures smoother operation, peace of mind, and enhanced safety for your vehicle.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

What to Do When Car Windows Are Frozen Shut?

Solutions for frozen car windows that won't open: 1. The owner can pour lukewarm water at the junction between the window and the sealing rubber strip. Avoid using boiling water as it can significantly damage the rubber seal; 2. First, start the engine and turn on the car's heater. Then, use a specialized ice scraper for car windows to slowly remove the ice from between the cracks; 3. If there's no ice scraper available, you can pour an appropriate amount of alcohol-based solvent on the windshield wipers. The ice will melt in a few minutes, after which you can wipe it clean with a towel. It's important to note that during cold winter weather, never force open frozen windows as this can severely damage the glass and window channels.
14
0
Share

Should New Tires Be Placed on the Front or Rear Wheels?

Replacing tires in pairs ensures consistent wear on both sides of the vehicle, enhancing stability and reducing safety risks. Below are guidelines based on the vehicle's drivetrain and usage conditions to determine installation positions: 1. Front-wheel-drive vehicles: Install new tires on the front. Front-wheel-drive cars require higher traction on the front wheels; insufficient grip can easily lead to accidents. 2. Rear-wheel-drive vehicles: Replace rear tires first. On wet or slippery roads or during sharp turns, rear wheels are prone to skidding or even rolling over. 3. All-wheel-drive vehicles: Replace at least two tires on the same axle. Since all four tires share the driving load and the front wheels handle steering, it's recommended to install new tires on the front. 4. Place potentially hazardous tires or spare tires on the rear wheels.
14
4
Share

Is it necessary to install ETC for cars?

It is necessary to install ETC. According to the regulations of the State Council, vehicles without ETC in 2020 will not enjoy toll discounts. In the future, only one manual lane will be retained at highway toll stations, and tolls can only be paid through manual channels. Additionally, newly installed ETC devices cannot be used on highways immediately; they need to be activated first. During free holiday periods, ETC users can still use highways, and passing through ETC lanes will not incur charges. ETC Billing Principle: There will be one or more ETC lanes on highways. Through microwave short-range communication between the vehicle's electronic tag installed on the windshield and the microwave antenna in the ETC lane, computer networking technology is used for backend settlement with banks. This allows vehicles to pay tolls without stopping at toll stations, all based on the principle of "pass first, deduct later." Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Low-carbon solution that reduces noise and exhaust emissions by eliminating stops at toll stations; Reduced wear and tear: Saves costs by minimizing frequent starts and brakes, lowering vehicle wear and fuel consumption; Improved efficiency: ETC lanes can theoretically increase vehicle throughput by 2-3 times, making traditional ETC faster, more advanced, and more efficient. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, key city clusters should achieve interoperability of transportation smart cards, and the proportion of vehicles equipped with ETC should significantly increase." It also set a target in the "13th Five-Year Plan" for comprehensive transportation development: "By 2020, the ETC usage rate for road passenger vehicles should reach 50%." Future possibilities: In addition to continuously improving the convenience of ETC installation and usage rates for passenger vehicles, future efforts will include promoting ETC for trucks and exploring deeper integration of ETC systems with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and other smart transportation developments. This will provide car owners with comprehensive travel services, meaning more application scenarios will support ETC usage.
1
4
Share

What are the causes of engine misfire in cylinder one?

Engine misfire in one cylinder may be caused by the following reasons: 1. Ignition system failure: Ignition system failure is the main cause of engine misfire in one cylinder. Ignition system failures include spark plug failure, ignition coil failure, fuel injector failure, etc. When there is a problem with the car's ignition system, the fuel and air mixture cannot be ignited normally, leading to engine misfire, which can result in reduced car power, engine vibration, and other issues. In this case, the car's ignition system should be inspected, and spark plugs should be replaced immediately, along with cleaning the fuel lines. 2. Wiring system: If one cylinder of the car misfires but there is no engine vibration, it is mostly due to wiring issues. In this situation, the car's wiring should be checked for any short circuits or open circuits and repaired promptly. 3. Engine failure: There are many reasons for engine failure, including excessively high engine temperature, poor engine oil quality, etc. This situation is quite complex and requires professional inspection at a repair shop or 4S store.
6
4
Share

What is the difference between the Golf R and GTI?

GTI is the sport version of the Golf, while R is the true performance version. These two models are not in the same class, with the GTI's guide price under 240,000 and the R's guide price over 400,000. The former accelerates from 0-100 km/h in 7 seconds, while the latter does it in 5 seconds. The former is front-wheel drive, and the latter is all-wheel drive. Below are the differences between the Golf R and GTI: 1. The GTI is domestically produced by FAW-Volkswagen, while the Golf R is imported. 2. GTI: Price 239,900; 2.0T; 220 horsepower, 350 N·m torque; 7-speed dual-clutch; 0-100 km/h in 6.46 seconds; dual exhaust pipes. R: Price 407,800; 2.0T; 280 horsepower, 380 N·m torque; 6-speed dual-clutch; 0-100 km/h in 4.96 seconds; quad exhaust pipes. 3. The GTI is a high-performance version with excellent handling and power, while the R is a super performance version with increased power and torque, better chassis tuning, and a more wild and passionate feel. The GTI's level is lower than the R's.
3
2
Share

What suspension does the Savannah use?

The Savannah uses a double-wishbone independent suspension for the front suspension and a multi-link non-independent suspension for the rear suspension. This vehicle also features a body-on-frame design. Below is relevant information about the Savannah's suspension: 1. The double-wishbone independent suspension is a relatively common type of suspension. This suspension has a complex structure, higher costs, and occupies a large amount of space. The double-wishbone independent suspension consists of two wishbones connected by a linkage. It can effectively control the body's roll amplitude and reduce the nose-dive phenomenon during braking. 2. In an independent suspension, there is no connection between the two wheels on the same axle. Since the movement of these wheels does not interfere with each other, independent suspensions generally offer better handling and comfort.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.