Which brand is the Emgrand engine from?

1 Answers
LaTanner
07/30/25 10:06am
The Emgrand engine is independently developed and produced by Geely. The functions of the engine are: 1. To fully combust the fuel input into the cylinders and generate power; 2. To determine the vehicle's power, fuel efficiency, stability, and environmental performance. Taking the 2021 Emgrand as an example, it is a compact car with body dimensions of: length 4632mm, width 1789mm, height 1470mm, wheelbase of 2650mm, and a curb weight of 1255kg. The 2021 Emgrand features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 109ps, maximum torque of 142Nm, and maximum power of 80kW, paired with a 5-speed manual transmission.
Was this review help?
2
0
Share
More Forum Discussions

How many meters from a narrow bridge is parking prohibited when driving a motor vehicle?

Parking is prohibited within 50 meters. According to Article 63 of the "Regulations for the Implementation of the Road Traffic Safety Law," the following provisions apply: When temporarily parking a motor vehicle on the road, the following rules must be observed: parking is prohibited at intersections, railway crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, and within 50 meters of these locations. On sections of the road with no-parking signs or markings, where there are separation facilities between motor vehicle lanes and non-motor vehicle lanes or sidewalks, as well as at pedestrian crossings and construction zones, parking is prohibited. In front of bus stops, emergency stations, gas stations, fire hydrants, or fire stations, and within 30 meters of these locations, parking is prohibited except when using these facilities. Precautions for motor vehicles passing through narrow bridges: Assess vehicle width and road width: The driver must judge the vehicle's width and the road's width, staying as far left as possible while driving. Align the vehicle: Before entering a narrow road or bridge, ensure the vehicle is properly aligned. Since the road is narrow, misalignment can make passage difficult. Proper alignment reduces the risk of scraping. Mind the wheelbase difference: When passing through narrow roads or bridges, consider not only whether the front wheels can pass but also estimate if the rear wheels can clear. Observe the rear: Use the rearview mirror to check the situation behind the vehicle. Generally, if the front of the car and the mirrors can pass, the entire vehicle should be able to pass.
12
1
Share

How to Check the Date of Car Glass?

The method to check the date of car glass is: 1. The number with black dots on the glass indicates the production year and month, where the number represents the year; 2. Determine based on the vehicle's manufacturing date. The maintenance methods for car glass include: 1. Proper use of glass cleaner; 2. Applying a protective film to the car glass; 3. Purchasing glass insurance for the car; 4. Thoroughly removing dirt from the car glass; 5. Regularly replacing the rubber seals. Car glass is manufactured by heating the glass in a furnace to near its softening temperature, then quickly transferring it to cooling zones with varying intensities to create uneven cooling, resulting in different stress levels between the main viewing area and the peripheral areas of the glass.
13
1
Share

Where is the headlight cleaning switch located?

The headlight cleaning switch is located on the panel below the headlight switch on the left side of the steering wheel. The headlight cleaning device has a water outlet below the headlight, which can usually clean dust and dirt from the headlight when activated. High-end vehicle models are equipped with this feature. During nighttime or low-light driving, rain and dust can reduce the illumination of headlights by up to ninety percent, severely affecting the driver's visibility and posing a significant safety hazard. Many countries now mandate the installation of a headlight cleaning system in vehicles. The headlight assembly also includes parking lights for use during dusk and nighttime driving.
3
0
Share

What should be paid attention to during the running-in period of a new car?

During the running-in period of a new car, the following points should be noted: 1. The car needs to be warmed up after starting; 2. Avoid overloading; 3. Do not drive long distances or at high speeds; 4. Use high-quality fuel; 5. Shift gears in a timely manner; 6. Do not brake harshly during the running-in period; 7. Avoid frequent use of emergency braking. The speed during the running-in period should be controlled between 50 to 80 kilometers per hour, and the running-in mileage is approximately 500 kilometers. The running-in period is a fundamental process to ensure that mechanical parts fully contact, rub, adapt, and set. During this period, the car's components can adjust and enhance their ability to adapt to the environment, wearing down any protrusions on the parts.
10
1
Share

How to Set the Time in a Buick Excelle?

To set the time in a Buick Excelle, follow these steps: 1. Turn on the radio; 2. The LCD screen of the radio will switch from displaying the frequency to showing the time. Press and hold the 'lock' button for more than 4 seconds; 3. Without releasing your hand, press the 'rewind' button to select the hour; 4. Press the 'fast forward' button to select the minutes; 5. Once adjusted, turn off the radio to exit. The Buick Excelle is an entry-level family sedan launched by SAIC-GM Buick. Taking the 2020 Buick Excelle as an example, its body dimensions are: length 4468mm, width 1765mm, height 1469mm, wheelbase 2611mm, and fuel tank capacity 40l.
12
4
Share

What is China IV?

China IV refers to the National Phase IV Motor Vehicle Pollutant Emission Standards. Methods to check a vehicle's emission standards include: 1. Checking the vehicle's environmental protection label; 2. Reviewing the vehicle's factory certificate or vehicle conformity certificate; 3. Logging into the Motor Vehicle Environmental Protection Public Inquiry Platform; 4. Differentiating based on the vehicle's manufacturing year. Vehicle emission standards regulate the permissible levels of harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and soot emitted from vehicle exhaust. These standards are established to prevent pollution from compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.