Which brand does Yueda Kia belong to?

How Long Can a Car Run After Running Out of Fuel?

Strictly speaking, a car cannot continue to drive once it runs out of fuel. However, if the fuel warning light comes on, most manufacturers design the system so that when the fuel level warning light illuminates (indicating the lower limit), there is typically enough fuel left to travel approximately 80-150 kilometers. The exact distance depends on the vehicle model, road conditions, and fuel consumption. Additional information: 1. The remaining driving range when the fuel light comes on varies by road conditions: 1. On highways, the remaining range is about 120-160 kilometers; 2. In mixed driving conditions, the remaining range is about 80-120 kilometers; 3. In congested traffic, the remaining range is about 30-60 kilometers. 1. Some vehicles have a red line on the fuel gauge, indicating that there is still about 10% of fuel left in the tank when the needle reaches this point. This is usually sufficient to reach a gas station, though the exact range may vary by vehicle. For example, the Volkswagen Magotan 1.8T has a 66L fuel tank, but it can be filled up to 68L when the pump automatically stops. When the fuel gauge needle reaches the red line, it can still travel approximately 70 kilometers.

14

1

Share

How to Remove Cement Spilled on a Car?

Here are the methods to deal with cement spilled on a car: 1. Before it hardens, you can wet it with clean water and rinse it off, then use a towel with cleaning solution to wash it. 2. If the cement has already hardened, you can use an acidic solution to clean it, such as common white vinegar. White vinegar is an acidic liquid that can effectively dissolve cement. Pour white vinegar onto the cement attached to the car, wait a few minutes for the cement to soften, and it will be easier to clean. However, multiple cleanings are usually required to thoroughly remove it. Be meticulous and patient during cleaning, avoiding rough scrubbing to prevent damage to the car paint. 3. You can also purchase a cement cleaner for washing, following the same method as with white vinegar. For small areas of cement, consider cleaning it yourself. For large areas, it is recommended to go to a professional car wash shop where specialized cleaning agents are used for a more professional and hassle-free cleaning experience. Additional Information: 1. Cement: A powdery hydraulic inorganic binding material. When mixed with water, it forms a paste that can harden in air or better in water, firmly binding materials like sand and stone together. 2. Early mixtures of lime and volcanic ash were very similar to modern lime pozzolan cement. Concrete made by binding crushed stone with it not only achieves high strength after hardening but also resists erosion from fresh or saltwater. For a long time, it has been an important binding material widely used in civil engineering, water conservancy, national defense, and other projects.

10

5

Share

What is the fuel tank capacity of the Jinjila 300?

The Jinjila 300 has a fuel tank capacity of 15 liters. The dimensions of this model are 2120 mm in length, 836 mm in width, and 1050 mm in height, with a wheelbase of 1420 mm. The Jinjila 300 is equipped with a V-type water-cooled twin-cylinder engine with an actual displacement of 300CC, delivering a maximum power output of 22.5KW. Fuel-saving tips: Start in first gear, as it provides high torque at low RPM to overcome the resistance of a stationary vehicle. This allows the engine to warm up sufficiently, ensuring all components expand to their optimal state. Good combustion sealing maximizes fuel efficiency, resulting in minimal fuel consumption. Shift to second gear only after the engine reaches 3000 RPM or higher. Starting in second or third gear requires higher RPMs, which can lead to unstable engine speeds and increased fuel consumption if not maintained properly. Maintenance intervals: After every 1000–2000 kilometers of riding, lubricate the necessary parts as specified and tighten any exposed bolts or nuts. The break-in period for this motorcycle is 1500 kilometers. There are various oil change methods recommended during this period, such as changing the oil at 300 km, 600 km, 1000 km, and 1500 km. After the break-in period, maintenance can be performed every 2000 kilometers.

9

1

Share

What is the fuel tank capacity of the 2019 Toyota Levin?

The 2019 Toyota Levin has a total of 20 models. Among them, the 1.2L versions have a fuel tank capacity of 50L, while the 1.8L versions have a fuel tank capacity of 43L. This data is officially released, and owners who have purchased the Levin can also check it on the vehicle's configuration sheet. The 2019 Toyota Levin uses 92-octane fuel. The 1.2L versions have a fuel consumption of 5.5 to 5.7L per 100 kilometers, allowing a full tank to cover a distance of 877 to 909km. The 1.8L versions have a fuel consumption of 4.1 to 4.2L per 100 kilometers, allowing a full tank to cover a distance of 1023 to 1049km. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are about 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is from the bottom of the tank to the safety limit, and there is still some space from the safety limit to the tank opening. This space ensures that the fuel in the tank can expand when the temperature rises without overflowing the safety space of the tank. If the fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the marked fuel tank capacity.

11

2

Share

What is the 0-100 km/h acceleration time of the Lynk & Co 03+?

According to official data, the Lynk & Co 03+ achieves a 0-100 km/h acceleration time of 5.9 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in faster acceleration. The Lynk & Co 03+ has a peak torque of 350 N·m, with its engine delivering a maximum horsepower of 254 hp and a maximum power output of 187 kW. The Lynk & Co 09 is paired with an automatic transmission, offering a maximum power of 187 kW and a maximum torque of 350 N·m. Transmission efficiency: The transmission acts as the medium for power transfer, inevitably involving some power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Lynk & Co 03+ uses an 8-speed automatic transmission, while the Lynk & Co 09 is equipped with an Aisin 8AT transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is known as the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. The Lynk & Co 03+ has a power-to-weight ratio of 158 Hp/T, achieving a 0-100 km/h acceleration time of 5.9 seconds, while the Lynk & Co 09 has a power-to-weight ratio of 205 Hp/T, achieving a 0-100 km/h acceleration time of 5.6 seconds.

9

3

Share

What are the reasons why a motorcycle won't start after being left unused for a long time?

Here are the reasons why a motorcycle won't start after being left unused for a long time: 1. It may be due to the electric starter not working, caused by a depleted battery. Try charging the battery first before attempting to start. 2. Gasoline is volatile, and if the motorcycle is left unused for too long, the gasoline in the tank may evaporate. Try adding some fuel before attempting to start. It's also possible that the remaining gasoline has deteriorated and formed sticky residues that clog the carburetor's jets, preventing fuel from being sprayed and making it impossible to start. In this case, simply remove the carburetor, clean it thoroughly, unclog all the jets, replace the gasoline, check that the spark plug is firing correctly, ensure the cylinder pressure is normal, and make sure the intake and exhaust are unobstructed—then it should start. 3. If the motorcycle hasn't been used for too long, certain components may have deteriorated due to lack of maintenance and could be damaged. In this case, take it to a repair shop for servicing. Motorcycle maintenance tips are as follows: 1. During the break-in period, the engine should reach around 1,300 to 1,500 RPM when warming up. If it's too low, the oil pressure may be insufficient, leading to wear on some components. 2. Regularly check the condition of the spark plug and replace it promptly if it's severely worn. 3. The chain should be lubricated frequently. If possible, use chain-specific oil or diesel; if not, use engine oil. Apply a moderate amount to prevent excess oil from splashing onto the tires and causing slippage. 4. While riding, ensure the gear matches the speed to avoid overloading the engine.

8

4

Share

Which brand does Yueda Kia belong to?

How Long Can a Car Run After Running Out of Fuel?

How to Remove Cement Spilled on a Car?

What is the fuel tank capacity of the Jinjila 300?

What is the fuel tank capacity of the 2019 Toyota Levin?

What is the 0-100 km/h acceleration time of the Lynk & Co 03+?

What are the reasons why a motorcycle won't start after being left unused for a long time?

Is the Suzuki Swift still available at 4S stores?

What is the ECO mode in cars?

How to Start a Mercedes-Benz?

Why does the Suzuki UY125 have a single rear shock absorber?