Which brand does the VV7 belong to?

2 Answers
JosieFitz
07/29/25 11:09pm
VV7 belongs to the WEY brand series under the domestic Great Wall Motors, which is a high-end sub-brand positioned by Great Wall. It is an SUV model with the Chinese name Wey VV7. The manufacturer gave the car such a name, and there is a saying that the two letters "VV" combined look like a "W", and "W" happens to echo the surname of the CEO of the WEY brand, hence the name "VV7". Below is some introduction about the VV7 vehicle: VV7 is the mass-produced version in the SUV series, featuring a stylish and grand appearance, and is specially equipped with an air filtration system that can filter out PM2.5 in the air, providing a healthy driving environment inside the car.
Was this review help?
1
4
Share
LeJade
08/16/25 1:16am
The VV7 belongs to the WEY brand, a premium sub-brand created by Great Wall Motors, specializing in SUV models. I have quite a bit of research on cars. As the flagship model of WEY, the VV7 attracted a lot of attention when it was launched in 2017. Its avant-garde and sporty exterior design, along with the high-quality materials used in the interior, give it a premium feel. The powerful performance, featuring a 2.0T engine paired with a 7-speed dual-clutch transmission, makes driving both comfortable and exhilarating. WEY represents the determination of Chinese automakers to break through into the high-end market, targeting young consumers by enhancing the driving experience while emphasizing safety performance, such as its impressive crash test results. As the parent company, Great Wall Motors dominates the domestic automotive market, and the success of the WEY brand has made more people take Chinese-made cars seriously. I also look forward to them continuously introducing new models.
Was this review help?
11
3
Share
Expand All
More Forum Discussions

Is it necessary to repaint a scratched fender?

A scratched fender does not require repainting. If the fender only has paint damage without any dents, simply applying putty and repainting the affected area is sufficient. However, there is one situation where a full repaint is recommended: when the vehicle has a special color. This is because partial repainting on special colors can easily result in color discrepancies, affecting the aesthetic appearance. Notes on car scratches: 1. New cars: It's best to repair scratches on new cars as soon as possible to maintain their appearance. 2. Polishing machine: For minor scratches, use a polishing machine, but avoid excessive grinding to prevent damage to the paint. 3. 4S shops: For more severe damage, it's advisable to visit a 4S shop for professional repair.
4
1
Share

How to adjust the brakes on the GAC Trumpchi GS4?

The method to adjust the brakes on the GAC Trumpchi GS4 is by adjusting the nut below the pedal. The brake clearance is automatically adjusted and does not require manual adjustment. Braking, also known as stopping, refers to the action of stopping or reducing the speed of running locomotives, vehicles, and other transportation tools or machinery. The principle of braking involves fixing a wheel on the high-speed shaft of the machine and installing corresponding brake shoes, bands, or discs on the machine base to generate braking torque under external force. The GAC Trumpchi GS4 is a compact SUV with a length, width, and height of 4545mm, 1856mm, and 1668mm respectively, and a wheelbase of 2680mm.
13
5
Share

What are the reasons for a car air conditioner not cooling properly?

There are several reasons why a car air conditioner may not cool effectively: 1. Excessive refrigerant: Too much refrigerant can reduce cooling efficiency. If the refrigerant and compressor oil contain excessive impurities, minor blockages can occur, leading to insufficient cooling capacity. 2. Insufficient refrigerant: A lack of refrigerant results in inadequate cooling. A dirty condenser or a loose compressor drive belt can also cause the air conditioner to blow warm air. 3. Excessive impurities: If the refrigerant and compressor oil contain too many impurities, minor blockages can form, reducing cooling capacity. If the entire air conditioning system has excessive contaminants in the refrigerant and compressor oil, the filter screen will likely become clogged, decreasing refrigerant flow, increasing resistance, and reducing the amount of refrigerant reaching the expansion valve, thereby causing insufficient cooling.
6
3
Share

How to connect the tachometer signal wire for BYD F0?

To connect the tachometer signal wire for BYD F0, attach the yellow signal wire to the trigger terminal of the ignition switch. The engine fires once every four strokes, which corresponds one-to-one with the RPM. Simply connect it in parallel. The other two wires should be connected to the positive and negative power terminals respectively, with black being positive and green being negative. The BYD F0 is a compact car launched by BYD Company. Its body dimensions are 3460mm in length, 1618mm in width, and 1465mm in height, with a wheelbase of 2340mm. It is equipped with a 1.0L naturally aspirated engine, delivering a maximum power of 50 kW at 6000 RPM and a maximum torque of 90 Nm between 4000 to 4500 RPM. It is paired with a 5-speed manual transmission.
7
2
Share

What are the reasons for the difficulty in starting the Ford Transit diesel vehicle in the morning?

The reasons for the difficulty in starting the Ford Transit diesel vehicle in the morning are: 1. Use of high-viscosity engine oil in winter; 2. Excessive carbon deposits in the intake system and at the root of the intake valve, resulting in an overly lean air-fuel mixture during cold starts; 3. Severe throttle valve contamination, leading to insufficient air intake; 4. Transmission lubricating oil viscosity being too thick, causing excessive engine operating resistance; 5. Insufficient cylinder compression pressure in the engine, among others. Taking the 2020 Ford Transit as an example, its front suspension is a MacPherson independent suspension, the rear suspension is a leaf spring non-independent suspension, equipped with a 2.0T turbocharged engine, with a maximum horsepower of 202 PS, a maximum power of 148.5 kW, a maximum torque of 300 Nm, and matched with a 5-speed manual transmission.
19
1
Share

What Causes the Coolant Reservoir to Overflow When the Car Is Not Overheating?

There are two scenarios where the coolant reservoir overflows without the car overheating: 1. Overflow occurs when aggressively pressing the accelerator: This is mainly due to significant gaps or cracks in the wet cylinder liners or cylinder head. When the engine is running, the pressure of compressed air or combustion gases in the cylinders exceeds the pressure of the coolant in the cooling passages, allowing these combustible gases to enter the engine's cooling passages through the gaps, resulting in the coolant reservoir overflowing. 2. No air in the coolant during engine operation: Whether the coolant temperature is high or low, pressing the accelerator does not cause the coolant to spray out from the radiator filler neck, but releasing the accelerator results in coolant spraying out from the filler neck.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.