Which brand does the Sylphy belong to?

1 Answers
Marissa
07/29/25 6:31pm
Sylphy is a vehicle under the Dongfeng Nissan brand. Below is extended information about the Sylphy: Basic parameters of the Sylphy: Taking the Sylphy 2021 Classic Manual Comfort Edition as an example, its body dimensions are: length 4631mm, width 1760mm, height 1503mm, wheelbase 2700mm, front track 1540mm, fuel tank capacity 50l, and trunk capacity 510l. Configuration of the Sylphy: The Sylphy 2021 Classic Manual Comfort Edition is equipped with a 1.6l naturally aspirated engine, with a maximum power of 90 kilowatts and a maximum torque of 155 Newton-meters. It is paired with a 5-speed manual transmission and features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
Was this review help?
8
1
Share
More Forum Discussions

Why can't the front hood be opened?

The reasons why the front hood cannot be opened are as follows: 1. Insufficient lubrication of the front hood lock tooth spring. 2. The front hood cable is detached or broken. 3. The front hood switch is damaged. The following are the functions of the hood: 1. Airflow guidance: For objects moving at high speed in the air, the air resistance and turbulence generated by the airflow around the moving object will directly affect the movement trajectory and speed. The shape of the hood can effectively adjust the direction of the airflow relative to the car's movement and the resistance force it generates, reducing the impact of the airflow on the car. 2. Protection of the engine and surrounding pipeline accessories: By improving the strength and structure of the hood, it can fully prevent adverse effects such as impact, corrosion, rain, and electrical interference, ensuring the normal operation of the vehicle.
9
2
Share

What are the symptoms of a faulty ignition coil in an old Jetta?

There are three main symptoms of ignition coil failure: short circuit, open circuit, or grounding of the ignition coil winding; surface discharge; and insulation aging. Here is a related introduction about the igniter: 1. Composition: The igniter is mainly composed of a power source, ignition coil, distributor, ignition switch, spark plug, additional resistor and its short-circuit device, high and low voltage wires, etc. 2. Identification method: When all the wiring of the igniter is connected, do not connect the power line (the charging end of the AC igniter) first, or disconnect the high-voltage output line of the magneto in advance. After ensuring that the ground wire of the igniter is well connected to the ground wire of the vehicle circuit, pull the high-voltage cap out of the spark plug and insert a spare spark plug to ground it on the vehicle body. Finally, connect the DC circuit of the motorcycle (the live wire is connected to the positive terminal of the battery) to the charging end of the igniter.
6
5
Share

Where is the Lexus Defogger Switch?

The Lexus defogger switch is located on the leftmost button in the center of the longest row of switches on the center console. Here is a related introduction to defogging methods: 1. Using the car air conditioner: Adjust the air vent to the windshield position, turn on the air conditioner, engage the compressor, and rotate the temperature knob to the warm air position. This method can both defog and provide warmth. 2. Using anti-fog spray: Spray "car glass anti-fog spray" (such as Fog Fighter) onto the inner surface of the car glass and wipe it clean. This not only removes dirt from the glass but also forms a thin transparent protective film on the surface, effectively preventing moisture from condensing into fog. One application can prevent fogging for about 10 days.
16
0
Share

Why does the Beidouxing's low beam not work while the high beam does?

The low beam of the Beidouxing car may not be working while the high beam does because the low beam filament might have burned out. Here is more information about high and low beams: 1. High beam: Adjusts the intensity of the light based on the distance of the filament. The high beam is at its focal point, emitting light that is parallel and highly concentrated, providing greater brightness and the ability to illuminate distant and high objects. When the high beam is beyond its focal point (between 1 and 2 times the focal distance), the emitted light diverges, illuminating a larger area of nearby objects. 2. Low beam: The low beam is designed for close-range illumination. Its design requirements include a wide coverage angle (160°) and short illumination distance, with no adjustable focus.
6
5
Share

What do ODO and TRIP mean on a car?

ODO is the abbreviation for odograph, which means odometer; TRIP represents the single-trip mileage, i.e., the distance recorded after manually resetting the odometer. Extended information about the car dashboard is as follows: 1. Introduction: The car dashboard is a device that reflects the working conditions of various vehicle systems. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, and warning lights. 2. Odometer: The odometer is a digital instrument that operates through the meshing of the counter drum gear with the worm gear on the speedometer drive shaft, causing the counter drum to rotate. Its characteristic is that when the upper drum completes a full rotation, the lower drum rotates 1/10 of a turn. Like the speedometer, modern odometers also include electronic versions, which obtain mileage signals from speed sensors. The accumulated mileage data in electronic odometers is stored in non-volatile memory, preserving the data even when power is off.
9
0
Share

Where is the one-touch window lift for the 2021 Leiling Sport Edition?

Open the car door, press the one-touch start switch, raise the power window to the top, continue pressing the switch for 5 seconds, then lower the power window to the bottom, and keep holding the switch for another 5 seconds to complete the setup for one-touch window lift. Here is an introduction to the one-touch start feature: 1. Introduction: The car one-touch start is a part of smart car devices, a button mechanism designed to simplify the ignition process, which can also be used to turn off the engine. The car one-touch start can be installed at the original key lock position or as an independent panel modification. 2. Functions: The functions of the one-touch start intelligent system include: automatic unlocking, automatic locking, automatic window closing, automatic anti-theft, one-touch start, one-touch shutdown, automatic locking before driving, automatic unlocking when parking and turning off the engine, and a trunk opening function.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.