Which brand does the Sylphy belong to?

2 Answers
OJuniper
07/25/25 6:18am
The Sylphy is a vehicle from the Nissan brand, positioned as a compact sedan. The 12th generation Sylphy is equipped with a powertrain consisting of a 1.6L or 2.0L engine paired with a CVT continuously variable transmission. The 13th generation Sylphy was launched as a successor, with the powertrain updated to a combination of a 1.6L or 1.8L engine and a VCT continuously variable transmission. The Sylphy's body dimensions are: length 4641mm, width 1815mm, height 1447mm, with a wheelbase of 2712mm. The Sylphy focuses on home comfort, offering a smooth driving experience and low fuel consumption thanks to the combination of a naturally aspirated engine and a continuously variable transmission. The 2.7-meter wheelbase provides ample rear seating space.
Was this review help?
9
3
Share
AxelFitz
08/10/25 6:06pm
Hi, I've known about the Nissan Sylphy for quite some time. It's a car from Nissan, a globally renowned major brand headquartered in Japan. The Sylphy is particularly popular in the Chinese market, falling under the compact sedan category with exceptional cost-performance, making it a favorite among new drivers and average families. I've driven the older model of the Sylphy and found it smooth to handle, fuel-efficient, and not expensive to maintain. Nissan has taken Chinese consumers' habits into account during the design, such as reasonable space arrangement and strong comfort. Moreover, the Sylphy consistently ranks at the top of sales charts, proving its reliable quality. I recommend first-time car buyers to pay more attention to it. As an owner, the Sylphy is very practical for daily commutes, without any flashy features, but it genuinely enhances life convenience.
Was this review help?
14
2
Share
Expand All
More Forum Discussions

What is the state of the intake and exhaust valves during the power stroke of a four-stroke engine?

During the power stroke of a four-stroke engine, both the intake and exhaust valves are in the closed state. Function of valves: The valves are specifically responsible for introducing air into the engine and expelling the exhaust gases after combustion. Structurally, they are divided into intake valves and exhaust valves. The intake valve's role is to draw air into the engine to mix with fuel for combustion; the exhaust valve's role is to expel the burned exhaust gases and dissipate heat. Current development of valves: To improve intake and exhaust efficiency, multi-valve technology is now commonly used. A typical configuration is four valves per cylinder (though designs with three or five valves per cylinder also exist), totaling 16 valves for a four-cylinder engine. The notation "16V" often seen in automotive specifications indicates that the engine has 16 valves in total. This multi-valve structure facilitates the formation of a compact combustion chamber, with the fuel injector positioned centrally. This allows the air-fuel mixture to burn more rapidly and uniformly, while the weight and lift of each valve are appropriately reduced, enabling faster opening and closing speeds of the valves.
18
1
Share

Why are Mercedes-Benz, BMW, and Audi called BBA?

BBA is an acronym formed from the initials of three German luxury car brands, typically referring to Mercedes-Benz (BENZ), BMW (BMW), and Audi (AUDI). Mercedes-Benz: Mercedes-Benz, one of the world's top ten automobile companies, was founded in 1926 by Gottlieb Daimler. Its predecessors were the Benz Motor Company and Daimler Motor Company, established in 1886. After the merger of the two companies in 1926, it was named Mercedes-Benz. Today, Mercedes-Benz is renowned not only for its high-quality and high-performance luxury cars but also as one of the world's most famous manufacturers of buses and heavy-duty trucks. BMW: BMW, short for Bayerische Motoren Werke AG, was founded in Munich, Germany, in 1916. By the 1930s, it had produced some of the world's best sports cars and luxury vehicles. The company recovered from the devastation of World War II and the financial downturn of the 1950s. Audi: Audi (Audi) is currently a subsidiary of Volkswagen Group, headquartered in Germany, with an annual production of approximately 450,000 cars. Its main product lines include the A3 series, A4 series, A6 series, A8 series, and sports car series.
17
0
Share

What to Do If the Wiper Doesn't Return to Its Original Position?

Solutions for when the wiper doesn't return to its original position: 1. Check if the motor is functioning properly. If it is, then rule out motor failure. 2. Inspect whether the wiper is stuck or has an open circuit. 3. Check if the hardware lacks sufficient lubrication, causing excessive friction and preventing the spring from automatically returning to its original position. Here’s some information about wipers: 1. Wipers, also known as windshield wipers or windscreen wipers, are devices used to remove raindrops and dust from the vehicle's windshield. They improve the driver's visibility and enhance driving safety. 2. The wiper motor uses a 3-brush structure to facilitate speed changes. The intermittent timing is controlled by a relay, utilizing the motor's return switch contacts and the relay's resistor-capacitor charging-discharging function to make the wiper sweep at a regular interval. The wiper blade's rubber strip is the tool that directly clears rainwater and dirt from the glass. The rubber strip is pressed against the glass surface by a spring strip, and the lip must align with the glass angle to achieve the desired performance.
5
0
Share

What is the engine displacement of the Fista?

The Fista's engine comes in two displacement options: 1.4 liters and 1.6 liters. Here is an introduction to the Fista: 1. The Fista is a compact sedan under the Hyundai brand. 2. It is equipped with two engines: one is a 1.4-liter turbocharged engine, and the other is a 1.6-liter turbocharged engine. 3. The 1.4-liter turbocharged engine delivers 140 horsepower and a maximum torque of 242 Nm. The engine's maximum power is achieved at 6000 rpm, and the maximum torque is available between 1500 to 3200 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 4. The 1.6-liter turbocharged engine produces 204 horsepower and a maximum torque of 265 Nm. The engine's maximum power is achieved at 6000 rpm, and the maximum torque is available between 1500 to 4500 rpm. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 5. The Fista's front suspension uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.
10
4
Share

Is it coolant or antifreeze in the Civic?

The liquid in the Civic is both coolant and antifreeze. The full name of antifreeze should be antifreeze coolant, meaning coolant with antifreeze functionality. Antifreeze prevents the coolant from freezing and cracking the radiator or damaging the engine cylinder block or head when the car is parked in cold winter conditions. How to choose antifreeze: The basic indicators of antifreeze are its freezing point and boiling point. On the market, antifreeze comes in several specifications with freezing points of -15°C, -25°C, -30°C, -40°C, etc. Generally, it's advisable to choose one that is at least 10°C lower than the lowest temperature in your region. How to determine if antifreeze is low: Observe the antifreeze warning light on the dashboard. If it lights up, it's likely due to low antifreeze levels, though it could also be caused by excessively high cylinder temperatures. Check the antifreeze reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving and add antifreeze promptly. Check the water level scale markings on the antifreeze tank. The normal antifreeze level should be between the maximum and minimum marks. Whether antifreeze is low depends on the scale. If the antifreeze is below the minimum mark, it indicates a shortage.
7
1
Share

How Early Should You Arrive for the Subject 1 Exam?

You need to arrive at the exam venue 30 minutes early for the Subject 1 exam. The Subject 1 exam content includes basic knowledge of motor vehicles; laws, regulations, and road traffic signals; safe driving and civilized driving fundamentals; and basic knowledge related to motor vehicle driving operations. The Subject 1 exam process is as follows: First, follow the staff's instructions to collect your personal driving training file in order at the waiting area; carry and present your ID card for verification by the supervising officer. Note that you must turn off your mobile phone when entering the exam area, no loud talking is allowed, and law textbooks are not permitted in the exam area (or should be placed in your bag). After the exam, keep your ID card safe and submit your file to the "Document Submission Window" at the front of the exam venue. Candidates who pass the exam will sign under the guidance of the staff at the exit before leaving the venue. Candidates who fail the exam can leave the venue immediately and await notification from their driving school regarding the retake schedule.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.