Which brand does Neta belong to?

How to Clear Fog on the Outside of the Windshield?

To clear fog on the outside of the windshield, you can slightly open both windows to allow air circulation, which helps eliminate the temperature difference on both sides of the windshield, making it difficult for fog to form. Alternatively, you can spray an anti-fog agent on the windshield. The principle of the anti-fog agent is simple: spraying a layer on the windshield forms an effective protective film, preventing water vapor from condensing. Here are some additional details: 1. Precautions: It is important to note that you should never use a towel to remove fog while driving. Some drivers like to keep a towel or a box of tissues in the car. Once fog appears on the windshield, they wipe the glass vigorously while waiting at a red light or parked on the roadside. Although this method is somewhat effective, it has obvious drawbacks, as wiping can sometimes leave streaks on the glass, and the fog may quickly reappear. 2. Hazards: If you are driving on a highway and cannot stop, not being able to see ahead due to fog can be very dangerous. Therefore, using a towel to wipe fog is not recommended.

7

1

Share

What is the correct method for adding refrigerant to a car?

There are two methods for adding refrigerant: 1. High-pressure side charging: Refrigerant is added through the bypass port (multi-purpose channel) of the compressor discharge valve (high-pressure valve), known as high-pressure side charging, which involves adding liquid refrigerant. This method is characterized by safety and speed, making it suitable for the initial charging of the refrigeration system, i.e., after leak detection and vacuuming. However, it is important to note that the compressor must not be turned on during this process (the engine must be off), and the refrigerant can must be inverted. 2. Low-pressure side charging: Refrigerant is added through the bypass port (multi-purpose channel) of the compressor suction valve (low-pressure valve), known as low-pressure side charging, which involves adding gaseous refrigerant. This method is characterized by slower charging speed and is suitable for replenishing refrigerant in the system.

14

0

Share

How to Turn On the Rain-Sensing Wipers?

The method to activate rain-sensing wipers is to start the vehicle and adjust the sensitivity knob of the rain sensor on the wiper. Relevant details are as follows: 1. Introduction: The wiper uses a rotary knob control method, with a clear 'ON' indicator on the knob. Simply rotate the knob to the automatic position to activate it. The knob has five positions: wiper off, slow auto-sensing, fast auto-sensing, manual slow wipe, and manual fast wipe, allowing free selection. 2. Definition: Wipers, also known as windshield wipers, are devices used to remove rain and dust from the vehicle's windshield, improving driver visibility and enhancing road safety. Due to legal requirements, almost all vehicles worldwide are equipped with wipers. The wiper assembly refers to the blade structure installed in front of the windshield, consisting of a motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly, primarily functioning to clear rain, snow, and dust that obstruct visibility on the windshield.

14

1

Share

What is Motorcycle Third-Party Insurance?

"Motorcycle Third-Party Insurance" is also known as compulsory motor vehicle traffic accident liability insurance. It refers to a mandatory liability insurance where the insurance company compensates for personal injury, death, or property loss of victims (excluding the insured and passengers of the insured vehicle) caused by road traffic accidents involving the insured motorcycle, within the liability limits. Precautions for purchasing motorcycle theft insurance are as follows: 1. Theft insurance coverage: The insured amount is negotiated between the policyholder and the insurance company within the actual value of the insured motorcycle. Actual value refers to the price of a new vehicle minus depreciation. It is particularly important to note that for used motorcycles, the insured amount should be based on the lower of the actual value or the purchase invoice amount. 2. Exclusions: Pay attention to the exclusions of motorcycle theft insurance. The insurer is not liable for losses caused by the following reasons: (1) War, military conflict, terrorist activities, riots; (2) Loss of the insured motorcycle due to natural disasters; (3) Intentional acts or illegal activities by the insured, their family members, or the driver; (4) The driver is under the influence of alcohol or drugs controlled by the state; (5) The insured motorcycle is defrauded, seized, confiscated, impounded, or requisitioned by the government; (6) Theft, robbery, or snatching of the insured motorcycle due to civil or economic disputes; (7) The lessee or a driver authorized by the lessee and the insured motorcycle go missing simultaneously.

12

2

Share

Is the Honda Avancier a Class B or Class C vehicle?

The Honda Avancier is a Class B vehicle. Below is relevant information about Class B and Class C vehicles: 1. Class B Vehicles: Class B vehicles are referred to as mid-size sedans, with a wheelbase ranging approximately from 2450 to 2600mm, and engine displacements from 1.6 to 2.4 liters. Main models include the Volkswagen Santana, Passat, Magotan, Audi A4, BMW 3 Series, Honda Accord, Toyota Camry, etc. 2. Class C Vehicles: Class C vehicles are also known as executive or mid-to-large-size sedans, with a wheelbase ranging approximately from 2600 to 2800mm, and engine displacements from 2.3 to 3.0 liters. Main models include the Mercedes-Benz E-Class, BMW 5 Series, Audi A6, Infiniti M35, etc.

5

Share

Why Do Half Shaft Bolts Keep Loosening?

Half shaft bolts frequently loosening and being prone to breakage can be attributed to the following reasons: 1. Excessive clearance: The hub bearing adjustment nut is too loose, resulting in excessive axial clearance of the shaft head. 2. Excessive sleeve protrusion: The half shaft sleeve protrudes outward too much, causing the inner arc of the half shaft cover to clamp with the outer end of the half shaft sleeve, preventing the shaft head end face from properly contacting the half shaft cover. This situation makes the half shaft bolts highly susceptible to breakage. 3. Insufficient torque: The tightening torque of the half shaft bolts is inadequate. 4. Abrupt clutch release: Sudden spinning of the wheels back and forth when the vehicle stalls or abruptly releasing the clutch to start can also cause the half shaft bolts to break easily.

13

5

Share

Which brand does Neta belong to?

How to Clear Fog on the Outside of the Windshield?

What is the correct method for adding refrigerant to a car?

How to Turn On the Rain-Sensing Wipers?

What is Motorcycle Third-Party Insurance?

Is the Honda Avancier a Class B or Class C vehicle?

Why Do Half Shaft Bolts Keep Loosening?

How to Turn on the Heating in a Volkswagen?

What is the reason for the motorcycle's fuel gauge not moving when the key is turned on?

What to Do When the Handbrake Button Won't Pop Out?

What car is the 570?