Which brand does Junpai belong to?

How to Add Windshield Washer Fluid to the Volkswagen T-Cross?

The method for adding windshield washer fluid to the Volkswagen T-Cross: 1. Turn on the windshield wiper fluid switch to spray out the existing fluid; 2. Completely drain the old windshield washer fluid, locate the windshield washer fluid filler port, and add a small amount of newly prepared washer fluid; 3. Turn on the windshield wiper switch again to clear out any remaining old washer fluid; 4. Once the spray nozzle stops emitting fluid for the second time, add approximately 4L of windshield washer fluid, then securely close the cap. The Volkswagen T-Cross is a compact SUV under SAIC Volkswagen. Taking the T-Cross 2021 280TSI DSG Comfort Edition as an example, its dimensions are 4218mm in length, 1760mm in width, and 1599mm in height, with a wheelbase of 2651mm, featuring a 5-door, 5-seat configuration. In terms of power, the T-Cross 2021 280TSI DSG Comfort Edition is equipped with a 1.4L inline 4-cylinder turbocharged engine, delivering a maximum power of 110kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.

5

Share

What is the trunk size of the RAV4?

The trunk capacity of the RAV4 is 580 liters. The trunk is a space designed for storing items, and its functionality should not be overlooked. The RAV4 is a compact SUV under the FAW Toyota brand. Taking the RAV4 2021 2.0L CVT 2WD Urban Edition as an example, its dimensions are 4600mm in length, 1855mm in width, and 1680mm in height, with a wheelbase of 2690mm. It features a 5-door, 5-seat body structure, a fuel tank capacity of 55 liters, and a curb weight of 1540kg. In terms of power, the RAV4 2021 2.0L CVT 2WD Urban Edition is equipped with a 2.0L inline 4-cylinder naturally aspirated engine, delivering a maximum power of 126kW and a maximum torque of 209Nm. It is paired with a CVT continuously variable transmission (simulating 10 gears) and adopts a front-engine, front-wheel-drive layout.

6

1

Share

Is the Audi CVT transmission with simulated 8-speed durable?

Audi CVT transmission with simulated 8-speed is durable. Multi-plate brake: The CVT achieves continuously variable speed ratios through the radius changes of two cone pulleys and a steel belt, with its core component being the transmission steel belt. The lifespan of the CVT largely depends on the service time of this steel belt. Apart from its own quality design, the belt's lifespan is also significantly influenced by individual driving habits. Torque converter: As the power input end, the flexibly connected torque converter combined with the inherently somewhat 'soft' CVT can easily result in poorer acceleration performance. To address this, Audi has replaced the power input end with a multi-plate wet clutch. Essentially, once the car starts moving, the transmission and engine are rigidly connected, which is bound to mitigate the phenomenon of sluggish acceleration.

11

0

Share

What is the difference between a straight push master cylinder and a side push master cylinder?

Straight push master cylinder and side push master cylinder differ as follows: Safety aspect: The straight push master cylinder is used to store brake fluid. When braking, operating the brake lever generates hydraulic pressure, which drives the slave cylinder to press the brake friction pads, clamping the brake disc on the front wheel to achieve braking. The transparent window next to the master cylinder is used to observe the brake fluid. The fluid level should reach half of the window, or as long as the fluid is visible, it is sufficient. Feel difference: There is a significant difference in feel. With the straight push, when the lever is pressed downward, the piston moves in the same direction, and the ratio between input and output is constant. The braking force increases proportionally with the amount of hand pressure applied. In contrast, with the side push, when the lever is pressed downward, the piston moves at an angle close to 90 degrees, resulting in a non-fixed ratio between input and output, which causes issues with the feel.

18

3

Share

Can Total Loss Vehicles Be Normally Traded?

Total loss vehicles can be normally traded. Trading of total loss vehicles: It is not illegal. Total loss vehicles can be traded as long as they meet the national regulations for roadworthiness of motor vehicles. China prohibits the trading of scrapped vehicles. As long as a total loss vehicle has not reached the scrapping standard, it can be normally bought and sold. Actual total loss: This refers to a situation where the insured object is damaged but not completely destroyed—it can be repaired or recovered. However, the cost involved would exceed the value of the salvaged insured object, making it not worth the effort. In such cases, the insurance company abandons further attempts and compensates the insured with the full insured amount, which is considered a constructive total loss. The insurance company will repair the vehicle and then sign an agreement with an auction company to auction it. Many vehicles can enter the auction process within 15 days. Auctions can be conducted on-site or online, but the entire process is lawful and legitimate. Additionally, the insurance company will assist with the transfer of ownership.

9

4

Share

What is E43 type electrode?

E43 type electrode is a carbon steel electrode. Meaning of E43 type electrode: It belongs to the type of electrode with a deposited metal tensile strength ≥421MPa (4300kgf/cm^2). Electrode model: The electrode model numbering method is as follows: the letter "E" represents the electrode; the first two digits indicate the minimum tensile strength of the deposited metal; the third digit indicates the welding position of the electrode, "0" and "1" indicate that the electrode is suitable for all-position welding (flat, vertical, overhead, horizontal), "2" indicates that the electrode is suitable for flat welding and flat fillet welding, "4" indicates that the electrode is suitable for vertical down welding; the combination of the third and fourth digits indicates the type of welding current and the type of coating. The addition of "R" after the fourth digit indicates a moisture-resistant electrode, "M" indicates an electrode with special provisions for moisture resistance and mechanical properties, and "-1" indicates an electrode with special provisions for impact properties.

20

3

Share

Which brand does Junpai belong to?

How to Add Windshield Washer Fluid to the Volkswagen T-Cross?

What is the trunk size of the RAV4?

Is the Audi CVT transmission with simulated 8-speed durable?

What is the difference between a straight push master cylinder and a side push master cylinder?

Can Total Loss Vehicles Be Normally Traded?

What is E43 type electrode?

Are Electric Tricycles Considered Motor Vehicles?

Does the Tesla Model 3 have a front-wheel drive version?

How to Turn Off the Anti-Skid Function on the Mercedes-Benz B200?

What is the battery model for the BYD F3 remote key?