Which brand does cordial tire belong to?

1 Answers
VonCecilia
07/30/25 2:15am
cordlal is a tire brand under ChengYan, which belongs to Sichuan Yuanxing Rubber Company. The company also has other tire brands such as "Yuanxing", "Jinyu", and "Jisitong", mainly producing and selling motorcycle tires, electric vehicle tires, tricycle tires, and ATV tires. When using cordlal tires in daily life, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves of the tire gradually become shallow. If the tread is worn flat, it will lose its drainage and anti-skid functions, significantly reducing the vehicle's performance. Small cracks may also pose a risk of tire blowouts at high speeds. Additionally, promptly remove pebbles from the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park the vehicle near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, the driver should not turn the steering wheel, as this will accelerate tire wear. Do not splash water to cool down. In hot weather or during high-speed driving, tires are prone to overheating, and the air pressure may increase. In such cases, stop to allow the tires to cool naturally. Avoid releasing air to reduce pressure or splashing water to cool down, as this may cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent use of brakes and sudden braking to prevent accelerated tread wear caused by dragging between the tire and the ground.
Was this review help?
20
1
Share
More Forum Discussions

How Many Types of Vision Can Drivers Be Divided Into?

Drivers' vision can be divided into static vision, dynamic vision, and night vision. Below is an introduction to the relevant standards for obtaining a driver's license: 1. Age for first-time applicants: The age range for applying for a small car (Class C) driver's license is 18 to 70 years old. Individuals within the legal age range can take the driver's license test, but considering that those too young or too old are more prone to accidents, there is a specified range. 2. Physical conditions: Height: For small car (Class C) applicants, the minimum height requirement is 150 cm; Color vision: No red-green color blindness; Hearing: Ability to distinguish the direction of sound sources with each ear 50 cm away from a tuning fork; Physical motor ability: Normal movement capability in limbs, torso, and neck.
4
5
Share

How to Coordinate the Clutch and Throttle When Shifting Gears in a Manual Transmission?

Manual transmission shifting requires coordination between the clutch and throttle. The steps are as follows: 1. Press down the clutch; 2. Shift into the desired gear; 3. After engaging the gear, slightly release the clutch while gradually pressing the throttle; 4. As the car's speed begins to increase, slowly release the clutch completely. The proper throttle technique involves supporting your heel while using the ball of your foot to press the throttle, controlling it with ankle movement. Avoid pressing the throttle all the way down—it's best to apply slightly more pressure than idle throttle. Add throttle as you approach the clutch engagement point, but be careful not to over-rev. The throttle isn't used in isolation; it must be coordinated with the clutch and brake to achieve optimal performance.
12
2
Share

Can a scooter run 200 kilometers at a time?

It is no problem for a scooter motorcycle to run more than 200 kilometers continuously. The following are the maintenance methods for scooters: Engine: For the engine, long-distance running is very challenging, because its temperature rises relatively quickly during the entire use process, and high temperature can easily force the engine to experience performance degradation and excessive wear. To address this performance, it is necessary to choose high-quality lubricating oil, and may even need to choose synthetic lubricating oil. Related systems. The filtration performance and air intake of the intake system will affect the combustion state of the engine; the braking system directly affects driving safety; the walking system directly affects driving comfort. Therefore, relevant inspections and maintenance should be carried out on the intake system, braking system, and walking system.
5
1
Share

Which is more difficult to pass: automatic or manual transmission?

Most driving test vehicles are manual transmission, so manual transmission is more difficult to pass than automatic transmission. The following are the differences between manual and automatic transmissions: In terms of operation difficulty: Automatic transmission does not require stepping on the clutch or frequent gear shifting while driving, making operation more convenient. Manual transmission requires stepping on the clutch to complete gear shifting operations, placing stricter technical demands on the driver. In terms of principle: Automatic transmission uses a computer to control hydraulic oil to push pistons for gear shifting based on throttle size, speed, and throttle opening. Manual transmission adds a user-adjustable gear shifting device to the original 100 automatic transmission, allowing owners to use this device for lifting. In terms of operation method: Automatic transmission does not require the driver to manually shift gears; the vehicle will automatically select the appropriate gear based on speed and road conditions. Manual transmission can only be operated through manual gear shifting by the driver.
9
1
Share

Is the Subaru Outback turbocharged?

Subaru Outback is not turbocharged, it uses a 2.5-liter naturally aspirated horizontally opposed engine. The Subaru Outback is a mid-size SUV under the Subaru brand, featuring MacPherson independent suspension at the front and double-wishbone independent suspension at the rear. Its body dimensions are 4775mm in length, 1820mm in width, and 1615mm in height. The 2.5-liter naturally aspirated horizontally opposed engine delivers 175 horsepower and a maximum torque of 235 Nm, reaching its peak torque at 4000 rpm and maximum power at 5800 rpm. It is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block.
12
1
Share

What does gear hunting mean?

Gear hunting refers to a situation during gear shifting where the speed synchronization is not optimal, causing the vehicle to be unable to maintain the most suitable speed for the current gear. It is a common issue with automatic transmissions. There are several reasons for gear hunting: 1. Problems with transmission fluid: Inferior transmission fluid, due to poor high-temperature resistance, is more prone to forming sludge and deposits compared to genuine transmission fluid. Excessive sludge and deposits can clog the transmission filter, increasing friction between transmission components and leading to malfunctions; 2. Fuel supply issues: Restricted or clogged fuel lines can result in inadequate lubrication of transmission components, causing frequent problems; 3. Tire pressure issues: Incorrect tire pressure can also lead to gear hunting, but this can be resolved by adjusting the tire pressure to the correct level.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.