Which BMW 7 Series models have four-wheel drive?

1 Answers
TaylorMarie
07/29/25 7:47pm
In the BMW 7 Series, the mid-to-high-end 740Li, all variants of the 750Li, and the M760Li are equipped with a four-wheel drive system. The entry-level 730Li and the lower-end 740Li models use a rear-wheel drive system. The four-wheel drive system used by BMW is called xDrive, an intelligent all-wheel drive system developed by BMW, which is installed in BMW SUVs and some high-performance sedans. Taking the BMW 740 as an example, its body dimensions are 5238mm in length, 1902mm in width, and 1479mm in height, with a wheelbase of 3210mm. The BMW 740 is powered by a 3.0-liter inline 6-cylinder turbocharged engine.
Was this review help?
3
4
Share
More Forum Discussions

How often should a Camry be serviced?

If the Camry uses mineral oil, semi-synthetic oil, or fully synthetic technology oil, it should be serviced every 5,000 kilometers or every six months; if it uses fully synthetic oil, it should be serviced every 10,000 kilometers or every year, whichever comes first in terms of mileage or time. Introduction to car maintenance: Car maintenance refers to the regular preventive work of inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Scope of car maintenance: Modern car maintenance mainly includes the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, and other maintenance areas. Purpose of car maintenance: The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate potential hazards, prevent failures, slow down the deterioration process, and extend the service life.
13
3
Share

What is the fuel consumption of the 1.4t Volkswagen Sagitar?

1.4t Volkswagen Sagitar has 3 models on sale: Sagitar-2022-280TSI DSG Excellence Edition, Beyond Edition, and Flyover Edition, all equipped with a 150-horsepower engine, with an NEDC fuel consumption of 5.6L per 100 kilometers. The 1.4t Volkswagen Sagitar models with a 150-horsepower engine have a fuel tank capacity of 50L. With a full tank, the driving range is 50/5.6*100=893km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger displacement generally consume more fuel than those with smaller displacement because larger displacement usually means higher power, requiring more gasoline for combustion. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block is cold, the injected gasoline is harder to atomize, requiring more gasoline for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine computer controls higher RPMs to warm up the car, which also increases fuel consumption.
16
5
Share

What Causes the Engine to Roar Loudly When Accelerating?

Here are the reasons why the engine roars loudly when accelerating: Excessive Engine Oil: Too much engine oil increases the resistance during instantaneous operation, raising the crankshaft's rotational resistance and reducing the engine's output power. Additionally, excess oil may enter the combustion chamber and participate in combustion, leading to oil burning, blue smoke emissions, and increased fuel consumption. Incorrect Engine Oil Type: Using the wrong engine oil type, such as switching from full synthetic oil to mineral oil, can cause issues. Therefore, always change the oil at reputable shops using genuine products. Counterfeit or low-quality oil can severely damage the engine. Following the oil type recommended in the maintenance manual is generally safe. Engine Overheating: Overheating can cause the engine to lose power. If the engine operates for extended periods, leading to surface overheating, the cooling system may fail. The first step is to check the cooling system. If there's a problem with the cooling system, it might cause exhaust blockage, as vacuum tubes could potentially rupture. In such cases, steam or hot air may escape from the engine, producing loud noises.
6
4
Share

Can I get my vehicle inspected on National Day, October 1st?

Vehicle inspection is generally not available on National Day, October 1st. In most cases, vehicle annual inspections cannot be conducted during the National Day holiday. However, some regions may offer inspection services during the holiday to accommodate working professionals. It's advisable to check with the local vehicle management office for specific arrangements. Inspection Schedule: The inspection schedule requires vehicles to be inspected every two years within the first six years, and annually thereafter. The inspection month is based on the registration month indicated on the vehicle's license. The first step in the inspection process is the exhaust emission test, which checks the engine's exhaust emissions and can reveal whether the engine is "digesting poorly," operating at optimal conditions, and whether it is fuel-efficient. Vehicle Exterior: Avoid overly flashy exterior modifications based on personal preferences, as they may not pass the inspection. Unnecessary modifications not only incur additional costs but also risk failing the inspection. Additionally, unauthorized changes to the vehicle body or engine replacement are strictly prohibited. Purchasing vehicles of unclear origin is strongly discouraged, as it may lead to legal consequences.
18
2
Share

What is the wading depth of the BAIC EC3?

Generally, sedans have a lower wading depth compared to SUVs. The wading depth of sedans typically does not exceed 20 centimeters, and some lower-profile models may not even surpass 15 centimeters. Additional information about the BAIC EC3 is as follows: 1. Interior: The new car's center console features injection-molded double-stitching technology, and the sub-instrument panel control panel and door switch panel are decorated with carbon fiber textures. The standard soft flat three-spoke steering wheel is wrapped in leather for a comfortable grip. 2. Exterior: The BAIC New Energy EC3 has undergone a complete redesign in appearance, featuring an urban CROSS style with four exterior colors: blue, white, orange, and red. The lines near the front grille logo have been redesigned, with stretching lines extending to the headlights, connecting with the LED daytime running lights. Each side is equipped with 5 vertically arranged LED lights.
15
3
Share

What are the damages caused by slamming car doors?

The door contains components such as locks, window regulators, audio systems, and sound insulation layers. Frequently slamming the car door can easily affect the hinges and fasteners connecting the door to the car body, and other components may also become loose or damaged. Additionally, the airflow caused by forcefully closing the door can affect the air pressure in the sealed space, leading to ear pain for the occupants. Introduction to car doors: A car door provides access for the driver and passengers and isolates external interference. It also helps to some extent in reducing side impacts and protecting the occupants. The aesthetics of the car are also related to the design of the doors. Quality of car doors: The quality of car doors is mainly reflected in their anti-collision performance, sealing performance, ease of opening and closing, and other functional indicators. Anti-collision performance is particularly important because, during a side impact, the buffer distance is very short, making it easy for occupants to be injured. A good car door should have at least two anti-collision beams, which are relatively heavy. This means that better doors are indeed heavier, but it does not mean that the heavier the door, the better.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.