Which Accord model has a manual transmission?

1 Answers
OHarper
07/29/25 10:21pm
The manual transmission model is the Accord 2.0MT, a mid-size sedan with dimensions of length (mm) 4960, width (mm) 1845, height (mm) 1480, and a curb weight of 1450kg. It has a standard seating capacity of 5. Additional specifications include: wheelbase (mm) 2800, front track (mm) 1590, rear track (mm) 1585, minimum ground clearance (mm) 115, curb weight (Kg) 1450, body structure sedan, number of doors 4, seating capacity 5, fuel tank capacity (L) 70.00, trunk capacity (L). Reference: There are also hybrid models that offer manual transmission driving functions. The hybrid models include: 1. 2018 Hybrid 2.0L E-CVT Ruiku Edition (China VI). 2. 2018 Hybrid 2.0L E-CVT Ruiling Edition (China VI). 3. 2018 Hybrid 2.0L E-CVT Ruizhi Edition (China VI). 4. 2018 Hybrid 2.0L E-CVT Ruizun Edition (China VI).
Was this review help?
3
0
Share
More Forum Discussions

Is Driving with an Expired License Considered Unlicensed Driving?

Strictly speaking, driving even one day after expiration constitutes unlicensed driving. However, there are two scenarios regarding an expired driver's license: one is when the validity period expires, within which the license can be renewed through inspection within one year and continue to be used. If it exceeds one year, the driver must retake the exams to obtain a new license. The other scenario is when only the inspection period has passed, which requires different handling procedures. When replacing a motor vehicle driver's license, the driver must undergo inspection by the traffic management department of the public security authority: 1. Drivers holding licenses for large buses, tractors, city buses, medium-sized buses, or large trucks must undergo inspection at the traffic management department within thirty days after the end of each scoring cycle. However, if there are no demerit points recorded during a scoring cycle, the inspection for that cycle is exempted. 2. Drivers holding licenses for vehicle types not specified in the third clause of this article, who are involved in a traffic accident resulting in death and bear equal or greater responsibility without having their license revoked, must undergo inspection at the traffic management department within thirty days after the end of the scoring cycle. 3. Motor vehicle drivers engaged in commercial transportation in a location other than their registered residence can directly undergo inspection at the transportation location after registering with the local vehicle management office for one year.
1
5
Share

Where is the cabin air filter located in the Honda Fit?

The cabin air filter in the Honda Fit is located inside the blower behind the glove compartment on the passenger side. To replace the filter, you need to remove the glove compartment and then open the cabin air filter cover. The cabin air filter is a crucial component of the air conditioning system and requires regular replacement. Typically, it should be replaced every 10,000 kilometers. Here are some key details about the cabin air filter: 1. The cabin air filter is an important part of the air conditioning system and needs to be replaced periodically. Most vehicles require replacement every 10,000 kilometers. 2. If the cabin air filter is not replaced for a long time, it can affect the efficiency of the air conditioning system and may produce unpleasant odors when the AC is turned on. 3. If you live in an area with poor air quality, you can purchase a cabin air filter capable of filtering PM2.5 particles. 4. When purchasing a cabin air filter, always opt for products from reputable brands and avoid cheap, low-quality filters. 5. The air conditioning system also requires regular cleaning and disinfection. Otherwise, bacteria can accumulate inside the system, posing health risks to passengers.
2
0
Share

What is the function of a car fuel injector?

The function of a car fuel injector: 1. A car fuel injector is a simple solenoid valve. When the electromagnetic coil is energized, it generates suction, lifting the needle valve to open the injection hole. Fuel is sprayed at high speed through the annular gap between the needle valve head and the injection hole, forming a mist that facilitates full combustion. 2. The fuel injector receives the injection pulse signal from the engine's electronic control unit to precisely control the fuel injection volume. 3. The fuel injector is a highly precise component that requires a large dynamic flow range, strong resistance to clogging and contamination, and excellent atomization performance.
15
0
Share

Why Should Brake Fluid Be Replaced?

Failure to replace brake fluid for an extended period can lead to its deterioration, which may result in brake system failure. Generally, brake fluid should be replaced every 2 years or approximately 60,000 kilometers. The following points should be noted during the use and replacement of brake fluid: 1. If mineral oil is mixed into the brake fluid, the entire brake fluid should be replaced. For example, if gasoline, diesel, or engine oil accidentally mixes into a brake system that uses synthetic brake fluid, the incompatibility of the fluids may significantly reduce braking effectiveness. 2. If water is mixed into or absorbed by the brake fluid, or if impurities or sediments are found in the brake fluid, do not proceed with the injection. In such cases, the brake fluid should be replaced or carefully filtered; otherwise, insufficient brake pressure may occur, affecting braking performance. 3. For vehicles equipped with a brake fluid level warning device, always monitor whether the warning indicator light is flashing and whether the warning sensor is functioning properly. If the brake fluid level is low, it should be replenished promptly. The stored brake fluid should be maintained between the marked minimum and maximum capacity lines. 4. During normal driving, if the braking force becomes inconsistent (sometimes light, sometimes heavy), the brake fluid should be replaced. Before replacement, the brake system should be thoroughly cleaned with alcohol.
12
0
Share

Where to place ETC in the car?

The installation position of ETC for small cars is generally in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, it is installed in the lower middle part. The suitable installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with anti-explosion film or those that have been retrofitted with anti-explosion film, it may affect the signal transmission of the microwave communication link, so it should be installed in the microwave sunroof strip. ETC is the abbreviation for Electronic-Toll-Collection, meaning electronic toll collection system. To apply for ETC, you need to provide the original and photocopy of the vehicle owner's valid ID card and vehicle license. If the application is not made by the owner, the agent's valid ID card is also required. The photocopy of the vehicle license should include the page with the most recent annual inspection stamp. A bank card for deducting highway tolls is also needed, and the vehicle must be registered under the name of an individual aged between 18 and 60. Here are some precautions for installing ETC: Do not block the view; it is best to install it behind the rearview mirror: Many car models have a large inclination angle of the windshield, which reduces the driver's field of vision. If ETC is installed without considering this, it will increase the driver's blind spot. Installing it on the right side behind the rearview mirror can avoid blocking the view. Do not affect charging: The ETC electronic tag consumes power, but generally, it does not need to be charged or have its battery replaced because it has a solar panel on the back that can charge itself. Therefore, when installing, avoid the black areas on the windshield and do not install it in a position that may block the solar panel. Once installed, do not remove it casually: The button in the middle of the adhesive is an anti-removal guide rod, connected to a switch below. After the electronic tag is installed, the windshield will press the anti-removal guide rod in. If it is removed casually, the anti-removal guide rod will pop out and trigger the switch, locking the electronic tag and making it unusable. You will then need to go to an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. When using ETC, note that: The ETC transaction sensing area is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic sensing and paying for the vehicle in front. The ETC lane recognition speed is 20 kilometers per hour. If the speed is too fast, the vehicle device information cannot be read, leading to a failed deduction. When using a debit card bound to ETC, insufficient balance will also cause the deduction to fail.
20
5
Share

What is the 0-100 km/h acceleration time of the Hongqi HS5?

According to official data, the 0-100 km/h acceleration time for the Hongqi HS5 2.0T model is 8.2 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, indicates how much force is available. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The Land Rover Range Rover Evoque has a maximum torque of 320 Nm and a 0-100 km/h acceleration time of 9.6 seconds. The Hongqi HS5 has a torque of 340 Nm and a 0-100 km/h acceleration time of 8.2 seconds. Transmission efficiency: The transmission is the medium for power transfer, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Hongqi HS5 is equipped with a manual-automatic transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Land Rover Range Rover Evoque has a power-to-weight ratio of 100 Hp/T and a 0-100 km/h acceleration time of 9.6 seconds. The Hongqi HS5 has a power-to-weight ratio of 128 Hp/T and a 0-100 km/h acceleration time of 8.2 seconds.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.