Where was the first automobile in New China produced?

Why is the engine malfunction indicator light on in a van?

It is recommended to have the van inspected at a professional repair shop when the engine malfunction indicator light is on. Here are some possible reasons for the engine malfunction indicator light being on: 1. Poor fuel quality: The engine has specific requirements for fuel quality standards. As regulations impose increasingly stringent requirements on engines, the fuel quality standards must also meet higher demands. 2. Carbon deposits inside the cylinders: Carbon deposits can alter the engine's design parameters. Additionally, carbon is inherently unstable and retains heat. These accumulated heat spots can cause uncontrolled ignition in the engine, leading to engine knocking, which in turn triggers the engine malfunction indicator light.

13

1

Share

Highway Toll Standards for 8-Seater Vehicles?

8-seater vehicles will be charged as Class 1 vehicles. Below is the relevant introduction to toll standards for various types of vehicles: 1. A new category "Special Operation Vehicles" has been added to vehicle classifications: All toll vehicles are specifically classified into three major categories: passenger vehicles, trucks, and special operation vehicles. 2. The boundary between Class 1 and Class 2 passenger vehicles has been revised from 7 seats to 9 seats: Passenger vehicles with 9 seats or fewer will also be charged as Class 1 vehicles, directly reducing highway tolls by half. 3. The classification boundary between Class 1 and Class 2 trucks has been changed to vehicles with a length less than 6 meters and a maximum allowable total weight of 4.5 tons: This means some trucks previously classified as Class 2 will now be classified as Class 1, resulting in lower highway tolls. 4. All types of trucks will be classified based on the total number of axles, vehicle length, and maximum allowable total weight.

1

0

Share

What does engine control system malfunction mean?

Engine control system malfunction indicates ECU damage. Below is relevant information about the engine control system: 1. The ECU is the engine's control computer, often referred to as the brain of the engine. Without the ECU, the car's engine cannot operate normally; 2. There are many factors that can cause ECU damage, such as power circuit failure, output power module failure, memory failure, ECU water ingress or moisture exposure, etc.; 3. The ECU, or Electronic Control Unit, is essentially a dedicated automotive microcomputer controller. It consists of a microprocessor, memory, input/output interfaces, analog-to-digital converters, as well as shaping and driving circuits, all composed of large-scale integrated circuits.

5

4

Share

What are the requirements for Didi vehicle registration in 2021?

2021 Didi vehicle registration has the following conditions: 1. The driver's age has not reached the legal retirement age, with males under 60 years old and females under 55 years old; 2. Possess the corresponding driver's license and have 3 years of actual driving experience, with no record of accumulating 12 penalty points in the last 3 scoring cycles; 3. No records of dangerous driving, drunk driving, hit-and-run, etc., and must comply with local requirements. The general steps for registering with Didi are as follows: 1. Enter your mobile phone number to receive a verification code; 2. After entering the verification code, fill in the city license plate number, car brand, ID card, etc.; 3. Finally, the "Registration Successful" interface will appear, completing all operations; 4. After successful submission of the documents, wait for Didi's review. Once approved, the registration process is completed; 5. After registration, you need to participate in online learning and take an online test. Only after passing the test will Didi's platform review the documents. After passing the review, log in to the Didi driver software, and then you can start accepting orders.

4

2

Share

What to Do If the ETC is Incorrectly Installed?

ETC installation can be repositioned if incorrectly placed. The suitable installation positions for ETC are: For small vehicles such as cars and minivans, the ETC card and OBU device should be installed in the upper middle part of the front windshield. For large vehicles like trucks and buses, the installation position is in the middle lower part. ETC installation requirements: the height should not be less than 1.2 meters or more than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane). The installation process for the ETC device is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU; the red light will briefly light up, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning properly. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is inserted into the OBU device.

17

3

Share

How to Turn Off the Yaris ECO Mode?

Yaris ECO is an acronym formed from the initials of the three English words Ecology, Conservation, and Optimization, representing a vehicle fuel-saving mode. When the ECO indicator light on the dashboard illuminates, it indicates that the vehicle's economy mode is activated. This mode primarily involves a comprehensive judgment and analysis of factors affecting fuel consumption during vehicle movement, such as automatic transmission gear position, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit calculates the optimal fuel quantity to be supplied to the engine for operation, effectively reducing fuel consumption compared to normal driving modes. Activating this mode can minimize unnecessary fuel consumption. Generally, it can be divided into two types: passive ECO driving mode and active ECO driving mode. The passive ECO driving mode mainly serves a reminder and guidance function. The active ECO driving mode usually features a button. Once activated, a series of driving-related settings will change. For example, the throttle opening corresponding to the same accelerator pedal depth becomes smaller (the accelerator becomes less responsive), the transmission shift logic prioritizes economy (earlier upshifts), and some vehicles may also adjust the air conditioning output power simultaneously. The ECO button is typically located on the left side of the vehicle, marked with the letters ECO. Some buttons are green in color, making them easily identifiable. Activating ECO is most effective in urban congested traffic conditions. In such scenarios, strong power is not required, and the frequent stop-and-go driving leads to higher fuel consumption. Enabling ECO mode not only reduces fuel consumption but also enhances driving comfort. In a few situations, it is unnecessary to activate ECO: When the vehicle is traveling at high speeds (up to 100 km/h), even if ECO is turned on, the vehicle's computer will prioritize speed, and the ECO mode will automatically deactivate. When high torque output is needed, such as when climbing a hill, the engine computer will prioritize ensuring and delivering sufficient power to drive the vehicle, and the ECO mode will automatically deactivate.

20

0

Share

Where was the first automobile in New China produced?

Why is the engine malfunction indicator light on in a van?

Highway Toll Standards for 8-Seater Vehicles?

What does engine control system malfunction mean?

What are the requirements for Didi vehicle registration in 2021?

What to Do If the ETC is Incorrectly Installed?

How to Turn Off the Yaris ECO Mode?

Does the Vezel have a horn beep feature when locking the car?

Can a Car Battery Recover by Itself After Being Dead?

How many engine options does the Buick Excelle have?

How long after withdrawing from driving school can I reapply?