Where to Use Turn Signals in Subject 2 Driving Test?

1 Answers
LeMargaret
07/29/25 7:40pm
There are 6 instances where turn signals are required in Subject 2: When starting the vehicle, turn on the left turn signal; When starting on a slope, turn on the left turn signal; During parallel parking, turn on the right turn signal when pulling over to park, stopping 30 cm from the curb before reversing; Before shifting into reverse during parallel parking, turn on the left turn signal, as the steering wheel will be turned fully right during reversing, causing the front of the car to move left; Before exiting the parking space during parallel parking, shift into drive and turn on the left turn signal, turning it off promptly after exiting; When entering a sharp turn (90-degree turn), turn on the left turn signal and turn it off promptly after completing the turn. Penalties for incorrect turn signal usage are as follows: Failing to use or incorrectly using turn signals before starting, turning, changing lanes, overtaking, or parking results in a 10-point deduction. Using turn signals for less than 3 seconds before starting, turning, changing lanes, overtaking, or parking results in a 10-point deduction. Subject 2 is scored out of 100 points, with failing, 20-point, 10-point, and 5-point deduction criteria. Passing requires: ① Scoring at least 90 points for large passenger vehicles, trailers, city buses, medium passenger vehicles, or large trucks; ② Scoring at least 80 points for other vehicle types. For small vehicles (C1, C2), the test includes five mandatory items: reversing into a parking space, parallel parking, stopping and starting on a slope (removed for C2), sharp turns (90-degree turns), and S-curves (some regions include a sixth item: highway toll collection). For large vehicles (A1, A2, A3, B1, B2), the test includes: pole test, stopping and starting on a slope, parallel parking, single-plank bridge, S-curves, sharp turns, narrow gate passage, continuous obstacle course, bumpy road driving, narrow road U-turns, and simulations for highways, mountainous curves, tunnels, rain/fog, slippery roads, and emergency handling.
Was this review help?
9
4
Share
More Forum Discussions

Which city does the license plate Ji E belong to?

Ji E is the license plate code for Xingtai City. The license plate codes for various cities in Hebei Province are as follows: Ji A for Shijiazhuang City, Ji B for Tangshan City, Ji C for Qinhuangdao City, Ji D for Handan City, Ji E for Xingtai City, Ji F for Baoding City, Ji G for Zhangjiakou City, Ji H for Chengde City, Ji J for Cangzhou City, Ji O for provincial government agencies, Ji R for Langfang City, and Ji T for Hengshui City. Xingtai City is located in the southern part of Hebei Province and serves as the northern gateway city of the Central Plains Urban Agglomeration and an important node city in the Beijing-Tianjin-Hebei Urban Agglomeration. Together with Xingtai International Inland Port and Xingtai Airport, it forms a crucial transportation hub connecting east and west, and linking north and south.
12
1
Share

How to Adjust the Driver's Seat Headrest in a Mercedes-Benz?

Steps to adjust the driver's seat headrest in a Mercedes-Benz: 1. Insert the headrest, ensuring that the notches on the rods are positioned on the left side when viewed from the driving direction; 2. Push the headrest downward until you hear it click into place; 3. Fold back the rear seat backrest until it locks into position. The car headrest is both a comfort feature and a safety device. Taking the Mercedes-Benz C-Class as an example, this vehicle is positioned as a mid-size car with dimensions of 4784mm in length, 1810mm in width, and 1457mm in height, a wheelbase of 2920mm, a front track of 1565mm, and a rear track of 1547mm. The engine equipped in this car delivers a maximum horsepower of 156Ps, a maximum power of 115kW, and a maximum torque of 250Nm.
20
1
Share

What are the differences in the UY Centennial Edition?

Here are the main differences between the UY125 commemorative edition and the standard version, which mainly lie in the vehicle decals, configurations, and price. Below is a detailed introduction: 1. Vehicle Decals: The difference between the commemorative edition and the standard version is the vehicle decals. For example, the UY125 commemorative edition adopts this design, with a prominent logo visible on the right side of the instrument panel. It also features three-dimensional decals, giving the entire vehicle a more premium look. 2. Different Configurations: In addition, the commemorative edition has some optimized and upgraded configurations compared to the standard version. For instance, the rear shock absorber spring in the centennial edition is changed to red, and the tires are replaced with more grippy Tsun tires. These changes enhance the riding experience to some extent. 3. Different Prices: The prices of the two versions vary, as you must pay for the sentiment.
7
4
Share

What are the differences between the 10th-generation Accord 230 and 260?

The differences between the 10th-generation Accord 230 and 260 are: 1. Different engine power levels: The Accord 230 is the low-power version of the Accord 1.5T engine; the Accord 260 is the high-power version of the Accord 1.5T engine. 2. Different maximum power: The Accord 230 has 130KW; the Accord 260 has 143KW. 3. Different maximum torque: The Accord 230 has 230Nm; the Accord 260 has 260Nm. 4. Different maximum horsepower: The Accord 230 has 177Ps; the Accord 260 has 194Ps. 5. Different maximum power RPM: The Accord 230 is 6000rpm, while the Accord 260 is 5500rpm. 6. Different maximum torque RPM range: The Accord 230 is 1500 to 3000rpm; the Accord 260 is 1600 to 5000rpm.
4
5
Share

Which One is the Brake and Which One is the Accelerator in a Car?

The brake and accelerator pedals in a car are located as follows: 1. Automatic transmission cars have two pedals, with the brake pedal on the left and the accelerator pedal on the right. 2. Manual transmission cars have three pedals, with the clutch pedal on the far left, the brake pedal in the middle, and the accelerator pedal on the far right. When decelerating or stopping, you need to press the brake pedal. To accelerate, press the accelerator pedal. When starting or shifting gears, press the clutch pedal. The accelerator pedal does not directly control the fuel injection volume but rather the throttle opening. When the accelerator pedal is pressed, the throttle opening increases, allowing more air to enter the engine, which prompts the fuel injection system to inject more fuel. The brake pedal controls the braking system, which consists of a vacuum booster, master brake cylinder, and wheel brake cylinders.
7
4
Share

What is the DS gear in an automatic transmission car?

In an automatic transmission car, DS refers to the switching between D gear and S gear. D gear is the drive gear, where the transmission automatically shifts up and down within the engine's speed range when the gear lever is moved to this position. The shift points depend on engine load, the driver's driving style, and vehicle speed. S gear is the sport mode of D gear. In this mode, the transmission can shift freely, but the shifting is delayed to keep the engine at higher RPMs for a longer time, thereby increasing the vehicle's power. An automatic transmission means the driver does not need to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. The engine's power is transmitted through the transmission, which is also a key factor affecting fuel consumption. Generally, an automatic transmission consumes about 10% more fuel than a manual transmission.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.