Where to Turn on Car Fog Lights?

2 Answers
SanVera
07/24/25 5:13am
The fog light switch is located either on the light control lever behind the steering wheel or on the light control knob on the panel in front of the driver's left leg. The position of the fog light switch varies depending on the car brand and model. Placing the fog light switch on the light control lever is a more traditional approach, typically found in older car models. To activate the fog lights, turn the middle part of the light control lever towards the dashboard: one turn for the front fog lights and two turns for the rear fog lights. Regarding the symbols for car fog lights: 1. Front fog lights: The symbol is a light bulb with three downward-slanting lines on its left side. Front fog lights are usually installed below the front bumper, close to the ground. 2. Rear fog lights: The symbol is also a light bulb, with three horizontal lines on its right side. Rear fog lights are generally installed within the rear tail lights.
Was this review help?
10
0
Share
GriffinMarie
08/11/25 12:54am
The position of the fog light switch can vary quite a bit depending on the vehicle model, but most are placed within easy reach of the driver. The most common location is on the stalk next to the steering wheel, alongside the turn signal and headlight switches—twisting it allows you to cycle through lighting modes, including the fog lights. Some cars feature a button on the dashboard marked with a wavy line or fog light icon, which you simply press to activate. Remember to turn on the headlights first when using front or rear fog lights, as the system may otherwise prevent them from functioning. Fog lights are incredibly useful in poor weather conditions like fog or heavy rain, enhancing visibility without the glare and reflection issues of headlights. If you can't locate the switch, check the vehicle manual or search for lighting options in the settings menu—avoid using them unnecessarily in clear weather, as it’s illegal and could result in a fine. Regularly maintain and inspect the lighting system to prevent issues like switch wear or poor contact.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

How to Turn Off the Rear Wiper on the Tiguan?

Tiguan's method to turn off the rear wiper is: Enter the car, locate the wiper control lever on the right side behind the steering wheel, and switch the wiper control lever to the OFF position to turn off the rear wiper. The wiper is an important accessory installed on the windshield, used to clear rain, snow, and dust that obstruct the view on the windshield, playing a crucial role in driving safety. The Tiguan's dimensions are 4506mm in length, 1809mm in width, and 1685mm in height, with a wheelbase of 2684mm. In terms of safety, the vehicle comes standard with features such as the body stability system, electronic brake-force distribution and traction control, electronic differential lock, EPB electronic parking brake, auto-hold function, and tire pressure monitoring system.
3
2
Share

Will adding National V diesel to National VI diesel vehicles have any impact?

Adding National V diesel to National VI diesel vehicles will have an impact and cause certain damage to the engine. The National VI emission standards are more than 50% stricter than National V. Diesel is a light petroleum product, mainly composed of diesel fractions produced through processes such as crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, and petroleum coking. It can also be obtained from shale oil processing and coal liquefaction. Methods for storing and using diesel: 1. Prevent the mixing of water and mechanical impurities; 2. It is strictly forbidden to mix with gasoline for lighting or as fuel for kerosene stoves; 3. Diesel must be precipitated and filtered to remove impurities and water before use; 4. Strictly avoid exposure to sunlight and open flame heating, and try to store it at lower temperatures. In winter, diesel can be preheated as necessary before use.
13
3
Share

Why is the Audi Auto Start-Stop Not Working?

Audi auto start-stop may not work due to the following reasons: 1. Seatbelt not fastened; 2. Air conditioning not at constant temperature; 3. External temperature too low; 4. Door not closed. The auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a traffic light). When it's time to move again, the system automatically restarts the engine. Audi is a German luxury car brand, symbolized by four interlocking rings. It is currently a subsidiary of Volkswagen Group, headquartered in Ingolstadt, Germany. Main models include A1, A3, A4, A5, A6, A7, A8, Q1, Q2, Q3, Q5, Q7, Q8, TT, R8, and the S and RS performance series.
8
4
Share

What does the three locks of an off-road vehicle mean?

The three locks of an off-road vehicle refer to three differential locks, which can significantly enhance the off-road performance and escape capability of the vehicle. The differential lock consists of components such as planetary gears, planetary carrier (differential housing), and half-shaft gears. An example of an off-road vehicle with three differential locks is the Mercedes-Benz G-Class, a rugged off-road vehicle where the three differential locks are located on the front axle, rear axle, and central drive shaft. The dimensions of the Mercedes-Benz G-Class are 4668mm in length, 1774mm in width, and 1952mm in height, with a wheelbase of 2850mm. The vehicle is powered by a V8 engine, delivering a peak power of 184 kW and a torque of 560 Nm at a speed exceeding 1700 rpm.
19
0
Share

What is the maximum tire size that can be fitted on a 14-inch rim?

14-inch rims can accommodate a maximum tire size of 185, depending on the tire's aspect ratio. The rim is the rotating part of the wheel that connects the tire's inner contour to the hub via spokes, serving as the metal centerpiece that supports the tire and mounts onto the axle. Depending on the characteristics and requirements of different vehicle models, the surface treatment process of the rim may vary, generally categorized into painting and plating. Rim maintenance methods include: 1. Allow the rim to cool naturally before cleaning when it's hot; never use cold water for cleaning. 2. For stubborn tar stains on the rim, try using a brush to remove them. 3. In humid environments, rims should be cleaned frequently. 4. If necessary, after thorough cleaning, apply wax to the rim for maintenance.
8
4
Share

What is the emission standard for cars in 2008?

2008 cars were compliant with China II, China III, and partially China IV emission standards. The China III standard refers to China's third-stage vehicle emission standard, equivalent to the Euro 3 emission standard. At that time, new vehicles were required to be equipped with an OBD (On-Board Diagnostics) system. When vehicle emissions failed to meet the Euro 3 standard due to factors like fuel quality, the OBD system would automatically trigger an alarm and switch to the default system mode, causing the engine to malfunction. Methods to check vehicle emission standards: 1. Look at the vehicle's environmental protection label, which has clear markings on the back; 2. Take the original or a copy of the vehicle's registration certificate to the environmental protection window of the vehicle management office or the local motor vehicle pollution management center for inquiry.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.