Where to Turn Off Cruise?

2 Answers
StKylie
07/23/25 11:38pm
Method to turn off cruise on the car: Step on the brake pedal and pull the cruise control system switch to the OFF position to turn it off. Here is the related content introduction: 1. Cruise: Cruise is a speed control system on a car. Once the car is set to cruise mode, the engine's fuel supply is controlled by the computer, which continuously adjusts the fuel supply based on road conditions and the car's driving resistance to maintain the set speed without the need to operate the throttle. 2. There are two working principles of cruise: (1) Electronic type: The latest electronic throttle cruise control process is more intelligent and precise. It controls the vehicle speed by using the cruise control system to adjust the signal output from the electronic throttle sensor, thereby controlling the opening size of the throttle. (2) Cable control type: The driver selects the speed based on road conditions, activates the cruise system via a momentary switch to replace throttle pedal control, and automatically adjusts the fuel supply according to the impact of slopes and road conditions on the speed, allowing the vehicle to achieve automatic constant speed driving.
Was this review help?
11
3
Share
Mary
08/10/25 7:28pm
I often use cruise control when driving on the highway, and turning it off is super easy—either gently tap the brake pedal to automatically deactivate it or look for a button on the steering wheel labeled CANCEL or OFF and press it to disengage. On my Honda, the button is on the right side, making it easy to locate. Actually, turning off cruise control isn’t just about convenience—it’s also about safety. In rainy, snowy conditions or when entering congested areas, manually deactivating it is wise because the system might react slower, whereas manual speed control is more flexible and reliable. Developing this habit can help avoid potential accidents, such as actively managing speed on curves or when vehicles are nearby. I also recommend checking the owner’s manual to familiarize yourself with your car’s specific setup—different brands like Ford might use a control stalk, while Tesla integrates it into the touchscreen. Practice a few times in normal conditions so it’s effortless when needed.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

How to Turn On the Rain-Sensing Wipers?

The control switch for the rain-sensing wipers is located on the right-hand stalk near the steering wheel. The knob can be used to adjust the sensitivity of the rain-sensing wipers. The right-hand stalk has three adjustable positions in the forward and backward directions: the stop position "0", the automatic wiper position, and the continuous wiper position. While driving, to activate the rain-sensing wipers, push the right-hand stalk forward once, and the car will display a message indicating "Rain-sensing wipers are on". After setting the stalk to the automatic wiper position, rotate the rain-sensitivity adjustment knob to allow the wipers to activate automatically based on the intensity of the rain.
13
1
Share

Where to Turn On Car Bluetooth?

Locate the Bluetooth function in the car entertainment system, which is generally similar to mobile phone operation. In the connection or settings options, there will be a Bluetooth icon indicating the Bluetooth menu. The following is relevant information about car Bluetooth: 1. Concept: Bluetooth hands-free is also called car Bluetooth or car hands-free. The Bluetooth technology in car Bluetooth systems is derived from mobile phone Bluetooth technology and shares the same transmission system. The Bluetooth hands-free system is an in-vehicle wireless hands-free system designed and developed based on wireless Bluetooth technology. 2. Main functions: Automatically identifies mobile phones and connects to them without cables or phone holders; the owner can control the phone without touching it, even keeping both hands on the steering wheel, using voice commands to answer or make calls. Users can conduct calls through the car's audio system.
11
3
Share

What is the problem when the trolley of the tower crane does not move?

The immobility of the tower crane trolley may be caused by the motor burning out, the trolley fuse in the distribution panel blowing, the control line of the trolley transfer switch in the control panel breaking, or a phase loss due to a broken trolley power line. Here is additional information: Transfer switch damage: If there is simply no forward or backward movement, it may be caused by a damaged transfer switch or contactor. Failure of the lifting mechanism to start: Check for wiring errors in the control circuit by comparing with the wiring diagram. If the fuse is blown, check if the fuse capacity is too small and replace it with a larger one if necessary. Short circuit, grounding, or open circuit in the motor winding: Locate the short or open circuit and repair it.
19
2
Share

Can I Drive Without a Driver's License Now?

Now you cannot drive without a driver's license. Here are the relevant details: 1. New traffic regulations: According to the new traffic regulations, you still need to carry a driver's license when driving a motor vehicle. Although portable query terminals are used by traffic police, they are not available in all regions. In addition, electronic driver's licenses have not yet been popularized nationwide, and there are no mobile terminals, so their practicality is not high. Among them, shared car rental is a common way to use electronic driver's licenses. 2. Penalty: If you drive without a driver's license and are caught, the motor vehicle will be detained, the driver will be fined a small amount, and one point will be deducted. The motor vehicle can only be retrieved after the driver provides valid documents.
7
0
Share

Is Hill Start Assist Automatically Activated?

Hill Start Assist is automatically activated and remains on by default, with no manual shut-off button. This feature primarily assists the vehicle when climbing slopes. Simply put, when encountering an uphill section, Hill Start Assist aids the vehicle in ascending, making driving easier and reducing effort. Several conditions must be met for Hill Start Assist to function: first, the vehicle must be on an incline; second, it should not be in Park (P) gear; third, the accelerator should not be pressed; fourth, the vehicle must be stationary; and fifth, the handbrake should not be engaged. Only when all these conditions are satisfied will Hill Start Assist activate. Known as HAC (Hill-start Assist Control), this system is a derivative function based on the ESP (Electronic Stability Program) system. It allows the vehicle to remain braked for a few seconds after the driver releases the brake pedal, facilitating a smooth start on a slope without using the handbrake.
3
3
Share

How to Remove 3M Adhesive from Window Trim?

Methods to remove 3M adhesive from window trim are: 1. Use a hairdryer to blow hot air until it becomes too hot to touch, then immediately apply even force to peel off the sticker. The remaining adhesive can be sprayed with tar remover, left for a while, and then wiped clean with a damp cloth; 2. First, use a wet towel to moisten and soften the paper on the sticker, then rub it off. The remaining adhesive can be treated with essential balm, alcohol, or hand cream, which is very effective for removing adhesive traces; 3. For glass that already has a film, never use cleaning agents as some chemicals may damage the film. In this case, use a towel dipped in a small amount of carburetor cleaner to repeatedly wipe the label area, but never spray the cleaner directly on the glass to avoid damaging the film. It is important to note that these are flammable substances, so be cautious of open flames during use.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.