Where to Take the Motorcycle License Test in Shanghai?

Should the RAV4 use 92 or 95 octane gasoline?

According to the official vehicle manual, the RAV4 is recommended to use 92 octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle manual, the RAV4's fuel cap also indicates the recommended octane rating. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with a compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of new technologies, the compression ratio alone cannot determine the appropriate gasoline grade. High compression ratio engines can still be tuned to use lower octane gasoline due to other influencing factors such as ignition timing, turbocharging technology, and Atkinson cycle technology. Generally, the higher the gasoline octane rating, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the RAV4 occasionally uses the wrong gasoline grade, simply switch back to the correct grade after the current tank is used up. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using a higher octane grade will not cause damage, but the increased octane value can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles recommended to use higher octane gasoline, using a lower octane grade can cause engine knocking. The significantly lower octane value lowers the fuel's ignition point, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance is created during the upward stroke. This resistance makes the engine run very unstably. Mild knocking may only increase noise without significant engine damage, but severe knocking indicates serious engine conditions, affecting driving stability and causing abnormal wear on pistons and cylinders, potentially leading to cylinder scoring.

16

0

Share

How Long Can a Car Be Driven After Its Maintenance Period?

A car can typically be driven an additional one to two thousand kilometers after reaching its maintenance period. Below are the specific details about car maintenance: 1. Main Items: Changing the engine oil and oil filter, air filter, fuel filter, transmission fluid, and tire maintenance. 2. Purpose: The goal of car maintenance is to keep the vehicle clean, ensure its technical condition is normal, eliminate potential hazards, prevent malfunctions, slow down the deterioration process, and extend its service life. 3. Importance: Daily car maintenance is crucial. Neglecting routine maintenance can not only cause unnecessary damage to the vehicle, shortening its lifespan, but also endanger driving safety.

8

3

Share

What is the new policy for annual inspection of vehicles over 15 years old?

The new policy for annual inspection of vehicles over 15 years old is that vehicles older than 15 years must undergo inspection every six months. The relevant explanations are as follows: 1. Introduction: To ensure the normal working condition, driving safety, and basic performance of vehicles, China has implemented a policy of inspecting vehicles over 15 years old every six months. Additionally, line inspection, vehicle registration certificate, and valid compulsory traffic insurance policy must also be checked. Comparatively, the annual inspection process for older vehicles is more complicated. 2. Others: For small passenger vehicles with fewer than 7 seats, the inspection is required every two years within the first 6 years. For vehicles with 7 seats or more (including 7 seats), the inspection is every two years within the first 6 years. All small passenger vehicles between 6 to 15 years old must undergo inspection once a year.

12

5

Share

What to Do When the Car Windows Fog Up After Turning on the Heater in Winter?

Press the defogging button, turn on the air conditioning (A/C) switch, set the temperature to the lowest, and switch to external circulation to defog. Both cold and warm air can be used to defog car windows, but warm air is slower than cold air. The most effective method is using cold air, which blows dry, cold air directly onto the glass, preventing water vapor from condensing on the window and achieving defogging. The method for using warm air is the same as cold air, but note that warm air should not be used on rainy days as it can initially worsen the fog. Always use external circulation when defogging car windows. The reason car windows fog up: There is a temperature difference between the inside and outside of the car. If the temperatures differ, the side with the lower temperature will have a lower saturated vapor pressure on its surface compared to the surrounding environment, causing water vapor to gather on the glass surface and form tiny droplets, resulting in fog. Methods to defog car windows: Air Conditioning Cooling: Use the air conditioning's cooling and dehumidifying function to reduce air humidity and remove fog. In summer, especially when multiple people enter the car without turning on the air conditioning promptly, the exhaled humid air can quickly cause the windshield to fog up. Turning on the air conditioning to blow cold air onto the windshield and using the dehumidifying function can quickly remove the fog. If humidity is too high and the air conditioning is ineffective, slightly opening the windows can rapidly reduce cabin humidity. Combining this with the air conditioning speeds up the process. Air Conditioning Heating: Use warm air to reduce the temperature difference and remove fog. In winter, blowing warm air onto the glass quickly raises its temperature, reducing the temperature difference between the inner and outer surfaces and preventing heavy fogging. However, the rear and side windows heat up slower, so it takes longer to fully defog them. Whether using automatic or manual air conditioning, turning it on aids dehumidification. Avoid setting the temperature to the coldest to prevent fogging on the outer windshield over time. Applying Anti-Fog Spray or Other Preventative Measures: Spray a small amount of defogging agent on the car windows and wipe it clean to remove dirt and stains. This leaves a thin, transparent protective film that effectively prevents water vapor from condensing into fog, especially useful in cold winters. Alternatives to anti-fog spray include dish soap, soapy water, glycerin, alcohol, or saline solution. After applying and letting it dry, wipe off excess residue with a chamois or soft cloth to keep the windows fog-free for days. Opening Windows for Airflow: If the fog is light, opening the side windows allows air to flow between the inside and outside, reducing the temperature difference and gradually clearing the fog. This method works similarly to using cold air from the air conditioning. However, it is unsuitable during rain, snow, on highways, or when fog is heavy. Rear Windshield Heating: Most cars have a rear windshield heating function, with varying button placements but the same purpose. Turning on the heating switch clears the rear windshield fog in about a minute.

16

5

Share

Is Rainwater Corrosive to Car Surface Paint?

Rainwater is corrosive to car surface paint. Here are specific details about car paint maintenance: 1. Waxing: Waxing forms a protective wax layer on the car surface, isolating the paint from the external environment, thereby protecting the paint and preventing oxidation and fading. New cars do not need waxing within the first 3 months of purchase, and excessive waxing afterward can cause some damage to the paint. It is recommended to wax at most once every two months. When waxing, apply evenly and maintain a consistent direction. 2. Crystal Coating: Crystal coating forms a strong fiber network on the paint surface, filling invisible microscopic pores in the car body paint, achieving a mirror-like effect. It adds a thin diamond-hard shell to the paint, further increasing the hardness of the paint compared to traditional coating, protecting the paint from damage.

10

1

Share

What does BRT lane mean?

BRT lanes are exclusively for BRT, which stands for Bus Rapid Transit. Here are the specific details: 1. BRT: In simple terms, it refers to buses. Generally, they are distinguished by solid yellow lines on the road. BRT lanes are dedicated to buses, and other motor vehicles are not allowed to occupy them. BRT vehicles are double-door buses, also known as rapid buses, with dedicated boarding and alighting platforms, and the lanes are exclusively for buses. 2. Bus Rapid Transit System: Abbreviated as BRT, it is a new type of public transportation system that lies between rapid rail transit (RRT) and conventional buses (Normal Bus Transit, NBT). It is a high-capacity transportation mode, often referred to as a subway system on the ground. By utilizing modern bus technology combined with intelligent transportation and operational management, dedicated bus lanes are established, and new-style bus stations are built to achieve rail transit operation services, reaching the service level of light rail. It is a unique urban passenger transportation system.

2

5

Share

Where to Take the Motorcycle License Test in Shanghai?

Should the RAV4 use 92 or 95 octane gasoline?

How Long Can a Car Be Driven After Its Maintenance Period?

What is the new policy for annual inspection of vehicles over 15 years old?

What to Do When the Car Windows Fog Up After Turning on the Heater in Winter?

Is Rainwater Corrosive to Car Surface Paint?

What does BRT lane mean?

Where is Audi domestically produced in China?

Where is the green book for used car loans held as collateral?

How to Handle Speeding on Highways?

What to Do If You Forget to Fasten Your Seatbelt on the Highway?