···
Log in / Register

Where to Stick the Small Mirror on the Rearview Mirror?

3 Answers
VanSkylar
09/06/25 6:56am
Stick it on the outer lower corner of the rearview mirror. Installing an additional small mirror on the car's rearview mirror can expand the driver's field of view, eliminate blind spots to a certain extent, and facilitate vehicle reversing and turning. It is used to observe the rear wheels when passing through relatively narrow roads. Here are some additional details: Notes: The small round mirror added to the rearview mirror is called a rearview small round mirror, also known as a blind spot mirror, reversing small round mirror, or car rearview mirror auxiliary mirror. It can be used to observe the rear wheels when reversing. However, it should be noted that the small round mirror cannot see blind spots when changing lanes or turning, especially at night. The small round mirror also has a drawback, which is distortion and severe distance inaccuracy, but the advantage is that it is cheap.
Was this review help?
7
2
Share
OMaddox
09/18/25 6:36am
I've been driving for over a decade, and the placement of small mirrors requires careful consideration. They are generally attached to the lower left or right corner of the rearview mirror, depending on the driver's position, to effectively expand the field of vision and reduce blind spots. Avoid placing it too close to the center, as it may obstruct the main mirror's view and affect normal driving observation. It's best to use high-quality double-sided tape to secure it firmly, and adjust it several times during testing to ensure it clearly displays the area near the wheels, making reversing or lane changing much easier. I've installed it several times and found this position to be the most practical and safe, without turning the rearview into a distraction. Remember to clean and maintain it regularly to prevent dust from blurring the mirror and affecting its effectiveness, making daily driving much more convenient.
Was this review help?
7
0
Share
Expand All
LeCaden
11/01/25 7:02am
As a new driver who just got my license, I tried several small mirror stickers before figuring out the trick; the ideal placement is in the corners, like the upper right or lower left, which gives you a better view of blind spots without causing distraction. When I first stuck it in the center, I found the glare was too strong, making it hard to see things behind me. After repositioning it to the mirror edge, the process was simple: clean the mirror surface, press the sticker flat, and wait a few minutes for it to set. This trick is especially helpful for parking, making it easy to spot small obstacles on the roadside and significantly improving safety. I’ve seen many fellow drivers share similar tips online and believe this step is crucial for beginners. Overall, choosing the right corner is key—don’t let it become a distraction while driving.
Was this review help?
20
1
Share
Expand All
More Forum Discussions

What is the purpose of highway laser lights?

Highway laser lights serve as alerting and warning devices. These green lasers are anti-fatigue driving warning lights installed on highways, featuring high brightness and long range. They effectively stimulate the brain of drivers who have been driving for extended periods at night, helping to combat fatigue. The green laser beams on highways have a long projection distance and are particularly noticeable at night. The laser lights come in two modes: continuous illumination and strobe, with a range of up to 2 kilometers. These lasers are typically installed only on relatively straight sections of the road. The green laser lights create a crisscrossing network of beams in the air above the oncoming traffic direction, without obstructing the driver's view. Together with flashing lights and high-decibel alarms, they form a tripartite warning system combining visual, auditory, and light effects, stimulating the driver's senses and enhancing road safety awareness. Their effectiveness is especially pronounced during nighttime, rain, snow, fog, and other adverse weather conditions.
12
1
Share

Where is the Hongqi engine produced?

Hongqi engines are produced in China, mainly including 1.8T, 2.0T, and 3.0V6 versions. The engine models are mainly: CA4GC18T01, CA4GC20T, CA6GV1. The CA6GV is an engine independently developed by China's FAW Group. This engine has a very wide range of applications and can be said to be one of the more successful engines independently developed in China. The Hongqi H5 is a mid-size car under FAW Hongqi. The car has a length, width, and height of 4945 mm, 1845 mm, and 1470 mm respectively, with a wheelbase of 2875 mm. In terms of suspension, the front suspension of the Hongqi H5 is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension.
9
1
Share

What does the key symbol on the Mercedes dashboard mean?

When the car's anti-theft system is triggered, a key symbol will appear on the dashboard. Modern car keys are no longer just mechanical keys; they are a key system integrating circuits, networks, and mechanical components. When the signal from the key does not match the car's password, the car system will recognize it as an illegal entry, and the anti-theft system will automatically lock the engine, preventing the vehicle from starting. Relevant information about the car dashboard is as follows: 1. Introduction: The instrument panel, or instrument-panel, is a rigid flat plate or structural component used to install instruments and related devices. It can be classified by type into screen-type, frame-type, passage-type, and cabinet-type instrument panels. 2. Function: The instrument panel can be equipped with external lighting and may also include a control console. It comes in various forms and specifications, allowing for the installation of different instruments as needed, or the combination of various instrument panels into a single unit.
19
0
Share

What Causes Water Leakage in the Lavida's Cabin?

Water accumulation inside the vehicle is primarily caused by poor sealing. It is necessary to inspect the sealing strips and water plugs. If the issue lies with the door panel sealing strips, they should be replaced with new ones. In case of drainage problems, the drainage holes need to be cleaned. Additional Information: Effects and Consequences of Vehicle Water Accumulation: 1. Engine Damage: Water entering the engine is a severe issue. Water can pass through the air filter, enter the intake valve, and then proceed into the cylinder block via the intake pipe. Under no circumstances should the engine be started in this condition, as it may lead to deformation of critical components such as the crankshaft and connecting rods, resulting in engine vibration or even component breakage in severe cases. 2. Brake Failure: Water accumulation can cause the vehicle to lose braking capability, posing significant hazards or accidents, particularly for vehicles equipped with drum brakes.
6
4
Share

What Are the Reasons for Mercedes-Benz One-Key Start Failure?

Reasons for the failure of the one-key start function in the Mercedes-Benz E-Class: 1. Fuel filter blockage; 2. Fuel pump filter screen blockage; 3. Severe carbon buildup or erosion of the spark plugs; 4. Starter motor malfunction; 5. Delayed fuel supply from the fuel pump during cold starts; 6. Insufficient fresh air or inadequate fuel supply. Relevant information about the one-key start function is as follows: 1. Introduction: The one-key start device is part of a smart car, serving as a button mechanism to simplify the starting process and also to shut off the engine. This device can be retrofitted in place of the original car key lock or as an independent panel. 2. Function: Unlike traditional mechanical key ignition and conventional starting procedures, simply pressing the one-key start button enables engine start and shutdown, eliminating the hassle of losing or searching for keys. Most operations require pressing the foot brake during the ignition process.
4
4
Share

Where is the Mercedes key sensing area?

The Mercedes key sensing area is located on the car's center console. The sensing receiver of Mercedes cars is very sensitive. When the car key is in your pocket and within two meters of the car, the door can be easily opened without any operation. The signal receiver is located under the center console. When the remote key has sufficient battery, it works within a range of several meters. Relevant information about the car key's 'hold' button is as follows: 1. Introduction: Press and hold the 'hold' button for a few seconds to open the trunk, avoiding the danger of opening the trunk while the vehicle is in motion, hence the name 'hold'. 2. Other functions: The 'hold' button is not a trunk opening button but a remote engine start button. Within a remote distance, press and hold for 2 to 3 seconds, and the car will start automatically. This function allows you to adjust the interior temperature in advance during winter and summer.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.