Where to Set the Ambient Lighting in the Tayron?

What to Do If Driver's License Has Not Been Reviewed?

Handling methods for an unreviewed driver's license are as follows: 1. Within one year: If the driver's license has not been reviewed for less than one year, the renewal review can be processed normally, following the usual procedures and submitting the required materials. 2. Over one year: If the license has not been reviewed for more than one year but less than three years, the applicant must first pass the subject one exam at the vehicle management office before proceeding with the renewal review. 3. Over three years: For a Class C license, if it has not been reviewed for three years, the license will be invalidated directly. For Class A and B licenses, the license will be downgraded, and the driver must go to the vehicle management office within 30 days to process the downgrade. If not processed on time, the vehicle management office will directly announce the cancellation of the driving qualification for the permitted vehicle type.

10

2

Share

What does the NGP function mean?

NGP stands for "Navigation Guided Pilot", which operates based on the navigation route set by the user. Below is a detailed introduction to NGP: 1. Applicable models: NGP is suitable for the XPeng P7 ZhiZun Edition equipped with the X-PILOT 3.0 system. 2. Functionality: In the NGP setup, the vehicle is equipped with 14 cameras, 5 millimeter-wave radars, and 12 ultrasonic radars, providing comprehensive perception capabilities. Additionally, the NVIDIA Xavier chip delivers powerful computing power to process multi-sensor data. Finally, high-precision maps and high-precision positioning are used to cross-validate sensor data and map data for the NGP automatic navigation function, ensuring more accurate decision-making and execution of the driving assistance features.

18

1

Share

Do You Need to Press the Clutch Every Time You Slow Down?

You don't need to press the clutch every time you slow down. Here are specific details about vehicle deceleration: 1. Correct Deceleration Method: When preparing to reduce speed, directly press the brake. Depending on the degree of speed reduction, press the clutch to shift gears. This method effectively protects the clutch from excessive wear. 2. Precautions: Avoid coasting in neutral, as it poses significant risks to vehicle operation, making it easy for the vehicle to lose balance. Improper operation can lead to accidents. When braking, use the brake first, then press the clutch to shift. Do not press the clutch and brake simultaneously, as this can cause the vehicle to lose control.

8

1

Share

Is a car considered as stock if it has been in the factory for 6 months?

3~6 months for imported cars are not considered as stock. Here are several levels of stock cars: 1. Level 1 stock cars: Cars that have not been sold for 3~6 months from the production date, these stock cars have high cost performance. The issue with Level 1 stock cars is that the engine oil may deteriorate, and the paint surface needs maintenance. After purchase, it's recommended to change the engine oil and wax the paint surface for protection. 2. Level 2 stock cars: Cars that have been stored for 6~12 months. For these cars, the engine oil may deteriorate due to long-term storage, the tires may deform from prolonged pressure on one spot, and the body may rust. 3. Severe stock cars: Cars that have been stored for over 1 year are not recommended for consideration due to potential quality issues and low market recognition.

17

2

Share

What is the fuel consumption of the Land Rover Discovery Sport?

The fuel consumption of the Land Rover Discovery Sport is 7.6-7.7L/100km. More details about the Land Rover Discovery Sport are as follows: 1. The body dimensions of the Land Rover Discovery Sport are 4600mm*1894mm*1700mm, with a wheelbase of 2741mm. 2. The Land Rover Discovery Sport adopts the popular technologies of direct fuel injection and variable valve timing, with a maximum horsepower of 276KW and torque of 510NM. 3. The Land Rover Discovery Sport is equipped with two turbocharged engines: a 2.0L gasoline engine and a 2.2T diesel engine. In addition to the 6-speed manual transmission, the transmission system also uses a ZF 9-speed automatic transmission.

4

Share

What to Do When the Car Won't Start After Sitting for a Month?

You can replace the spark plugs or jump-start the car. Here are the relevant explanations: 1. Battery Discharge: Battery discharge—characterized by the starter motor turning but not fast enough (lacking power), and later the starter motor only making a clicking sound without turning. Low temperatures in winter or forgetting to turn off certain electrical devices can cause the vehicle to fail to start, especially when used for short distances at low speeds over a long period in winter, leading to battery voltage dropping below the rated value, making starting and normal operation impossible. If this happens, call the service station for assistance, or jump-start the car with another vehicle, or temporarily start it, but then you must take the car to the service station to charge the battery. 2. Fuel Flow Blockage: Fuel flow blockage—characterized by no fuel pressure in the engine's fuel supply line. This situation often occurs on particularly cold mornings, caused by long-term dirt buildup in the fuel lines. When temperatures are extremely low, water and debris mix and block the fuel lines, resulting in the inability to start.

12

0

Share

Where to Set the Ambient Lighting in the Tayron?

What to Do If Driver's License Has Not Been Reviewed?

What does the NGP function mean?

Do You Need to Press the Clutch Every Time You Slow Down?

Is a car considered as stock if it has been in the factory for 6 months?

What is the fuel consumption of the Land Rover Discovery Sport?

What to Do When the Car Won't Start After Sitting for a Month?

How to Buy a Fake Driver's License?

Why Does the Steering Wheel Make Abnormal Noises?

What is the National Standard for Tire Three Guarantees?

Can I apply for license plate immediately after printing the indicator?