Where to Scrap Motor Vehicles in Boxing?

3 Answers
DelIker
07/29/25 5:52pm
Motor vehicles in Boxing should be scrapped at the FAW Service Station yard, located 4 kilometers north of Boxing County, west side of the road (adjacent to the north of Jiaoyun Group). Obtaining the Vehicle Scrapping Application Form: The vehicle owner needs to go to the local Vehicle Management Office to obtain the vehicle scrapping application form, also known as the "Motor Vehicle Scrapping Form". Fill in all the information about the vehicle truthfully, and bring along the ID card, vehicle registration certificate, driving license, and all other relevant documents related to the vehicle. After filling out the form, submit it to the relevant staff for review. It should be noted that if the process is entrusted to someone else, a power of attorney and the original ID card of the trustee must also be provided. Auto Repair Factory Designated by the Local Vehicle Management Office: After the "Motor Vehicle Scrapping Form" is approved, the vehicle to be scrapped should be sent to a qualified vehicle scrapping facility or an auto repair factory designated by the local Vehicle Management Office, meaning it must be processed by a formal scrapping company. During the vehicle dismantling process, it is necessary to pay attention to whether someone is taking photos of the vehicle for evidence, mainly including photos before, during, and after the dismantling. However, there are usually supervision personnel from the Traffic Management Office present. Finally, the dismantling factory will issue the vehicle scrapping form, stamp it, and then the traffic management personnel will sign it.
Was this review help?
6
1
Share
DelilahFitz
08/14/25 9:37am
I previously helped a relative with the scrapping of an old car in Boxing. You can just go directly to the recycling company in the east of the city. Remember to bring your ID card, vehicle license, and registration certificate. They’ll first conduct a vehicle inspection to confirm it meets the scrapping conditions, then dismantle it on-site, and finally issue you a "Recycled Motor Vehicle Certificate." After getting the certificate, you still need to go to the DMV to complete the deregistration process—don’t forget this step, as it could affect future new car purchases. The whole process takes about two days, and it’s recommended to go on a weekday when it’s less crowded. Also, a reminder: if the car can still run, drive it there yourself; if not, contact them in advance to arrange a tow truck. There might be a small towing fee, but it’s more convenient.
Was this review help?
3
0
Share
Expand All
DiAlexa
08/14/25 9:38am
In Boxing, scrapping a vehicle requires finding a qualified recycling point, such as the county's only authorized dismantling plant. The process is actually quite simple: drive the car to the plant or have them pick it up, bring all the vehicle documents and the owner's ID card, and the frame number will be cut on the spot after verification. The key point is that after they issue the recycling certificate, you must go to the DMV to complete the deregistration within 7 days. This step is the most easily overlooked. I've seen many people delay for over half a year before going to handle it, only to find that the license plate has already been locked, and they have to pay additional fines before they can buy a new car, which is particularly troublesome.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

What are the common transmission faults in the BMW X5?

Common transmission faults in the BMW X5 include abnormal noises, jerking, and shaking. Below is a detailed introduction to the BMW X5: 1. Overview: The BMW X5 is the first four-wheel-drive SUV model under the BMW brand, launched in the U.S. at the end of 1999. This vehicle has a wheelbase of 2975mm, a weight of 2200 kg, a top speed of 243 km/h, and is front-engine four-wheel drive with a displacement of 2.0 or 3.0L. 2. Others: The greatest advantage of the BMW X5 is its exterior design, which continues the family characteristics of BMW SUVs, showcasing BMW's design elements throughout. The panoramic sunroof and angel eye design are outstanding. The interior is simple and elegant, with exquisite details. The top speed ranges from 225-243km/h (electronically limited). The drive system is front-engine four-wheel drive.
14
4
Share

In summer, should you turn on the heater or the air conditioner to remove fog inside the car?

In summer, turn on the air conditioner to remove fog inside the car. Principle of using cold air to defog: On rainy days, the most common method to deal with fogging on the windshield while driving is to turn on the air conditioner and direct it to blow onto the front windshield. The cold air quickly disperses the fog on the glass, providing a fast and direct effect. This happens because the cold air creates a "cold air film" on the glass surface, preventing carbon dioxide from condensing on the glass, thus achieving the defogging effect. Do not use hot air to defog in winter: Hot air can also remove fog, but if you use hot air to defog the front windshield on a rainy day, it will actually worsen the fogging. Right after turning on the hot air, the front windshield may immediately become like "frosted glass." Therefore, if you are driving and the windows fog up due to rain, you should not use hot air to defog.
2
2
Share

What is the difference between the Mercedes-Benz GLC Dynamic and Luxury models?

The difference between the Mercedes-Benz GLC Dynamic and Luxury models lies in their price and configuration. The Luxury model is priced higher and comes with more comprehensive features. Below is a detailed introduction to the Mercedes-Benz GLC: 1. Overview: The Mercedes-Benz GLC is the first all-new crossover model launched by Mercedes-Benz, released in the 2015 model year. Essentially, the GLC is the coupe version of the GLK. Its fuel consumption ranges from 8.1 to 8.2L/100km. The gasoline engine options include a 1.8T, a 2.0T, and a 3.0-liter V6. 2. Other Details: The GLC combines the power of an SUV with the elegance of Mercedes-Benz quite perfectly. The maximum output power is 135 kW (GLC200-4MATIC), 155 kW (GLC260-4MATIC), and 180 kW (GLC300-4MATIC), respectively. The GLC's integrated control system features a touchpad and a dynamic drive selector.
19
2
Share

What Causes a Humming Noise When a Sedan is Running?

The following are possible reasons for a humming noise when a sedan is running: 1. Air pipe leakage or improperly installed air filter: This is usually caused by a leak in the engine's intake pipe or an improperly installed air filter, or a detached vacuum hose. During driving, this situation may occur. It is necessary to conduct an inspection to ensure the intake pipe is reliably sealed, restoring normal operation. Timely maintenance is essential to ensure stable, comfortable, and safe driving. 2. Bearing failure: Drive the car to 80KM, then shift to neutral and coast while listening carefully. If the noise becomes clearer, it can be determined that one of the four wheel bearings has a problem. If the noise disappears when coasting in neutral, it is usually due to a bearing failure in the engine. Common bearing failures in the engine include those in the water pump, generator, or tensioner pulley.
20
3
Share

Can You Wear Shorts While Driving in Summer?

You can wear shorts while driving in summer. Relevant Regulations: The "Road Traffic Safety Law" explicitly prohibits drivers from driving barefoot, wearing high heels, or slippers. Drivers who violate these regulations will be deducted 2 points and fined a certain amount. Precautions for Driving in Summer: Avoid Fatigue Driving: Summer days are long and nights are short, with high temperatures leading to significant physical exertion, especially at noon when fatigue and drowsiness are common. Therefore, ensure sufficient sleep to stay energetic. If you feel sleepy while driving, stop the car promptly, take a short rest, and continue driving only when you are fully alert. Choose and Use Sunglasses Correctly: With ample sunlight in summer, many car owners wear sunglasses while driving.
9
1
Share

Does charging a new battery before it's fully depleted affect the battery?

Charging the battery before it's fully depleted for a long time will reduce the battery's lifespan. Precautions: It's best to fully deplete the battery before recharging it, as this avoids memory effects and can extend the battery's service life. Do not leave the battery in a fully depleted state for extended periods, as this can lead to sulfation of the battery plates. Sufficient charge: When the green light turns on, it indicates that the battery is ready for use or is mostly charged, but it's not yet at 100%. It's recommended to perform a long charge once every week or two, meaning continue charging after the green light turns on for about 16 hours. This can enhance the battery's lifespan. Long-term non-use: If the electric bicycle is not used for an extended period, make sure to charge the battery before storing it and check the charge level monthly.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.