···
Log in / Register

Where to Scrap a Car for Disposal?

4 Answers
DiEloise
08/30/25 2:28am

Vehicle scrapping process: The car owner applying for scrapping and renewal must fill out and submit one copy of the "Motor Vehicle Alteration, Transfer, Modification, Suspension, and Scrapping Approval Application Form," stamped with the owner's seal. Apply at the registration and acceptance counter. For vehicles that have reached the scrapping age limit, a "Vehicle Scrapping Notice" will be issued. For vehicles that have not reached the scrapping age limit but are deemed to meet the scrapping standards after inspection by the motor vehicle inspection counter, a "Vehicle Scrapping Notice" will be issued. The vehicle owner can choose a qualified recycling company to dismantle the vehicle by presenting the "Notice." The recycling company will dismantle the vehicle and take photos after verifying the "Notice." The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The vehicle owner must submit the "Alteration Form," "XX Province Vehicle Renewal Technical Inspection Form," "Scrapped Vehicle Recycling Certificate," and photos of the dismantled vehicle to the motor vehicle inspection counter for verification and signature. The license plates and certificates will be reclaimed, and the scrapping registration will be processed after approval according to regulations.

Was this review help?
18
0
Share
ORyan
09/11/25 6:37am

When your car breaks down and needs to be scrapped, you should actually go through the proper channels. I recommend first submitting an application at the local vehicle management office, bringing along documents like the vehicle license, ID card, and vehicle registration certificate. They will issue you a scrapping certificate, and then you can proceed to the designated auto dismantling center for processing. Don’t just take it to any roadside recycling station—that could lead to trouble or being scammed. Government-approved centers ensure environmentally friendly disposal of waste oil and parts, preventing pollution. The process usually takes about a week, and sometimes you might even get some residual value compensation, depending on the car’s condition. It’s best to check the official list of approved scrapping centers online beforehand to avoid unnecessary trips. This matter concerns safety and responsibility—it’s not something to take lightly. I’ve seen cases where improper disposal led to serious consequences.

Was this review help?
9
1
Share
Expand All
VanIvan
10/25/25 7:28am

To scrap a car safely and with peace of mind, it's essential to choose the right place. I found that the most reliable option is government-certified vehicle dismantling enterprises. These facilities are regulated and more professional, ensuring materials are recycled according to environmental standards. The process involves: first, registering and canceling the license plate at the vehicle management office, then scheduling an appointment with the dismantling center to hand over the vehicle. A small service fee of a few dozen yuan is all it takes for them to handle the remaining dismantling work. Never cut corners by arranging private disposal, as this could lead to environmental pollution or illegal resale of the vehicle, posing risks to others' safety. I personally processed an old car through official channels, which turned out to be much more hassle-free, and I even received a recycling certificate as proof of cancellation. It's advisable to call the local hotline in advance to inquire about the locations of these facilities, as they usually have service points in both urban and rural areas.

Was this review help?
18
5
Share
Expand All
ClaireAnn
12/08/25 7:52am

My old car is beyond repair, so I searched online for the location of a certified scrapyard when scrapping it, and everything was settled when I got there. Bring the car's documents, fill out the forms on-site, and hand over the vehicle. The staff will inspect and assess its recycling value before dismantling it. The whole process takes just a day to complete—it's not complicated, but make sure to avoid unlicensed recycling stations to prevent being scammed or running into trouble. I recommend checking your phone’s map for "vehicle scrapping points." Many cities have official apps where you can directly book the service, saving time and ensuring a smooth process.

Was this review help?
5
2
Share
Expand All
More Forum Discussions

What Does the Used Car Business Include?

Used car business operations encompass the following aspects: 1. Traditional used car markets. This includes vehicle acquisition and sales, as well as proxy services for transfer of ownership, annual inspections, and insurance. 2. Used car brokerage firms. These act as intermediaries, typically offering used car consignment sales and used car sales on behalf of clients. 3. Used car auction companies. These conduct online auctions for used vehicles. 4. E-commerce. This refers to used car websites that provide information on used vehicles. Additional information: The business scope refers to the categories, varieties of goods, and service items that the state permits enterprises to produce and operate. It reflects the content of the enterprise's business activities and the direction of production and operation, serving as the legal boundary for the enterprise's business activities and embodying the core content of the enterprise's civil rights capacity and behavioral capacity.
17
1
Share

Should the Generator Belt and Tensioner Pulley Be Replaced Together?

Both must be replaced together. The specific reasons are as follows: 1. The service life of the belt tensioner pulley is limited. 2. Cars generally exhibit the following scenarios: (1) The tensioner pulley may fail before the belt shows any signs of damage. Therefore, replacing the belt indicates that its lifespan has expired (2) Although the tensioner pulley may not be damaged at present, its remaining lifespan is short. While it is possible to wait until it fails to replace it, doing so carries significant risks. (3) If the tensioner pulley is severely damaged, it can damage the new belt, and even if it doesn't, it may not function properly. (4) Replacing the belt is to avoid breakage and driving failures, eliminating potential hazards. If the tensioner pulley is not replaced, the hazard remains. Therefore, for safety reasons, both the belt and the tensioner pulley should be replaced together.
7
2
Share

What causes the jerk when shifting from CVTD to N?

Damaged solenoid valves are a major cause of jerking. The distinction is simple: occasional jerking occurs without a pattern, while consistent jerking happens at a certain RPM or when shifting between specific gears (e.g., from 2nd to 3rd). The reason for jerking at fixed speeds is: sludge in the transmission fluid circulating and clogging the oil passages in the valve body. Over time, this can lead to a series of transmission issues such as overheating, harsh shifting, and slipping. More reasons are as follows: 1. Presence of contaminants: Transmission jerking or harsh shifting is often not due to internal valve body damage but rather stubborn dirt and contaminants inside, especially when they accumulate in the valve body, blocking oil passages and preventing effective oil pressure regulation, leading to jerking, harsh shifting, and slipping. The traditional solution is to replace the transmission fluid. 2. Insufficient air intake: The engine's air intake system—engines require not only fuel but also air. If components like the air filter or throttle body are clogged or malfunctioning, reducing air intake, it can result in sluggish acceleration and jerking. The ignition system should not be overlooked either; if spark plugs misfire, leak, or fail to atomize properly, it can also affect engine acceleration.
17
4
Share

What stickers are suitable for blue cars?

Generally, for blue cars, you can choose white or yellow stickers. White is the best option as it creates a harmonious and eye-catching effect, while yellow offers a contrasting look. Stickers primarily serve a decorative purpose, so it's important not to choose colors that clash too much with the car's original color. Here are some sticker considerations: 1. Avoid yellow and red stickers: Yellow and red are typically used for emergency repairs and warnings, so using these colors may result in penalties. It's worth noting that stickers cannot be applied arbitrarily—size and placement matter. Car stickers must comply with regulations; otherwise, they may fail annual inspections. If spotted by traffic police, you could also face fines. 2. Sticker area: If you want to apply stickers to your car, the total area must not exceed 30% of the car's surface. Exceeding this limit requires filing with the vehicle management office and obtaining a new vehicle license. Additionally, stickers must not be placed in any location that obstructs the driver's view or affects driving safety, as this will also cause the car to fail the annual inspection. Lastly, stickers resembling police insignia are prohibited.
13
3
Share

Can the owner's phone number be queried through the license plate number?

Knowing the license plate number allows you to inquire about the owner's information by calling 114 or 122, but corresponding permissions are required. Below is an introduction to the types of license plates: 1. New energy vehicle special license plates: Green background with black characters and black borders. New energy vehicle license plates feature a gradient green color, while large new energy vehicle license plates have a yellow-green dual-color scheme. 2. Large vehicle license plates: Yellow background with black characters and black borders, applicable to medium (and above) passenger vehicles, cargo vehicles, special-purpose vehicles, semi-trailer tractors, and electric vehicles. 3. Trailer license plates: Yellow background with black characters and black borders. 4. Small vehicle license plates: Blue background with white characters and white borders. 5. Embassy and consulate vehicle license plates: Black background with white characters, red "Embassy" or "Consulate" characters, and white borders. 6. Hong Kong and Macau entry-exit vehicle license plates: Black background with white characters, white "Hong Kong" or "Macau" characters, and white borders.
12
1
Share

What is the reason for BMW X3 air conditioning not cooling?

The reasons are: lack of refrigerant in the air conditioning system / the refrigerant pressure switch detects too low pressure or pressure switch failure; air conditioning compressor failure; air conditioning control unit failure; air conditioning function switch failure; air conditioning system wiring harness open circuit / short circuit failure. Here is the extended information: 1. How air conditioning works: The air conditioning system mainly works by the compressor compressing the gaseous refrigerant into a high-temperature and high-pressure gas, which then flows through the pipeline into the condenser. In the condenser, it is cooled and condensed into a high-pressure liquid refrigerant by the cooling fan. The high-pressure liquid refrigerant flows through the pipeline into the dryer reservoir, where it is dried and filtered before flowing into the expansion valve for throttling. Its state changes dramatically, turning into a low-temperature and low-pressure liquid refrigerant that enters the evaporator. In the evaporator, it absorbs the heat from the air flowing through the evaporator, lowering the air temperature and blowing out cold air, producing a cooling effect. 2. How refrigerant works: The refrigerant itself evaporates into a low-temperature and low-pressure gaseous refrigerant after absorbing heat, and is then sucked into the compressor through the pipeline for compression. As long as the compressor works continuously, the refrigerant circulates continuously in the air conditioning system, producing a cooling effect. When the compressor stops working, the refrigerant in the air conditioning system stops flowing, and no cooling effect is produced.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.