Where to Replace the Vehicle License?

1 Answers
RiverFitz
07/29/25 6:30pm
To replace the vehicle license, you should go to the vehicle management office. To obtain a new vehicle license, bring two copies of your ID card, two 1-inch bareheaded color photos, the original ID card, the original driver's license, and a medical examination certificate from a county-level or higher hospital (you can also get a free medical examination at the vehicle management office). After filling out the motor vehicle driver's license application form, you can proceed with the replacement. Notes for replacing the vehicle license at the vehicle management office when it expires: 1. The driver should apply for a replacement at the vehicle management office that issued the original vehicle license within 90 days before the expiration date. 2. When applying, you should fill out the motor vehicle driver's license application form and submit the driver's ID proof, the original vehicle license, and a medical condition certificate issued by a county-level or higher medical institution or a military hospital at the regimental level or above. 3. For applying for a special small automatic passenger vehicle for the disabled, you should submit a medical condition certificate issued by a medical institution designated by the provincial health authority.
Was this review help?
16
0
Share
More Forum Discussions

What Causes Unstable Throttle in Motorcycles?

The reasons for unstable throttle in motorcycles are: 1. Excessive or insufficient fuel supply; 2. High-voltage misfire caused by ignition system failure. The throttle, also known as the air valve or throttle valve, refers to the control device that regulates engine power. The correct method for shifting gears on a motorcycle is: 1. Before shifting, twist the throttle to increase the throttle opening, ensuring the engine has sufficient power to maintain speed during the shift; 2. After slightly increasing the throttle, quickly close it; 3. Use the fingers of the left hand to grip the clutch and disengage it in preparation for shifting; 4. Step on the foot gear shift lever to shift to a higher gear; 5. Gradually release the clutch grip; 6. Promptly twist the throttle grip backward to open the closed throttle.
15
4
Share

What are the differences between Maybach and Mercedes-Benz S-Class?

The differences between Maybach and Mercedes-Benz S-Class are: 1. Different logos: The Maybach logo consists of two overlapping M letters; the Mercedes-Benz S-Class logo is a three-pointed star. 2. Different seating arrangements: The Maybach is a four-seater with separated rear seats; the Mercedes-Benz S-Class is a five-seater with connected rear seats. 3. Different body dimensions: The Maybach measures 6171mm in length, 1980mm in width, and 1573mm in height, with a wheelbase of 3827mm; the Mercedes-Benz S-Class measures 5259mm in length, 1899mm in width, and 1497mm in height, with a wheelbase of 3165mm.
15
3
Share

How to Use Gear Shifting for Beginners When Driving

The method for beginners to use gear shifting when driving is: 1. Confirm good road conditions ahead before upshifting; 2. The sequence is: slightly press the accelerator, release the accelerator, fully depress the clutch, then upshift; 3. Be clear about the relationship between the accelerator and clutch - do not press them simultaneously; 4. Do not look down at the gearshift; 5. Shift gears gently; 6. Downshift after decelerating, and decelerate by braking first; 7. There's no need to downshift to first gear when stopping; 8. Use second gear for turns, first gear for U-turns, third gear for traffic lights, and pass pedestrian crossings at about 30 mph in third gear. The precautions for beginners when shifting gears are: 1. Ensure accurate gear positioning, appropriate force, and swift, precise shifting; 2. Upshift sequentially but downshift can skip gears, and any gear can be used for stopping; 3. Accelerate before upshifting and decelerate before downshifting.
12
0
Share

What are the precautions for driving through water with a car?

Precautions for driving through water with a car include: 1. Do not attempt to restart the engine; push the car to a location where it does not obstruct traffic; 2. Close all windows and doors and wait for assistance. The potential impacts after driving through water are: 1. The engine may experience insufficient power and shaking issues; 2. Moisture or water ingress in the high-voltage ignition system may cause short circuits; 3. Water entering the exhaust pipe; 4. Residual water can prevent the brake discs and brake pads from fully engaging, resulting in loss of braking power; 5. Debris can easily accumulate in the chassis gaps, leading to rust; 6. Water vapor may form inside the headlights, affecting light transmission; 7. Wet wiring harnesses and electrical connectors in the engine compartment may cause short circuits.
10
1
Share

Where is the fuse box located in the Wuling Hongguang S?

The fuse box of the Wuling Hongguang S is located under the hood, on the left side of the battery in the engine compartment. The fuse box is used to house the car's fuses. Taking the Wuling Zhiguang 2020 model as an example, its body dimensions are: length 3797mm, width 1510mm, height 1820mm, with a wheelbase of 2500mm and a fuel tank capacity of 38 liters. The Wuling Zhiguang 2020 is equipped with a 1.2L naturally aspirated engine, delivering a maximum power of 56kW and a maximum torque of 108Nm, paired with a 5-speed manual transmission. It features a MacPherson strut front suspension and a longitudinal leaf spring rear suspension.
14
5
Share

What are the reasons for a manual transmission car not moving when in gear?

Manual transmission cars may not move when in gear due to: 1. Transmission solenoid valve malfunction; 2. Brake clutch pressure leakage; 3. Mechanical failure; 4. Sensor or ECU issues. The correct starting method for manual transmission cars is: 1. Fully depress the clutch pedal with your left foot; 2. Shift the gear lever into first gear; 3. Turn on the left turn signal and honk to alert vehicles and pedestrians ahead and behind; 4. Release the handbrake and gently lift the clutch with your left foot; 5. Lightly press the accelerator with the ball of your right foot. The correct starting method for automatic transmission cars is: 1. Start the engine, depress the foot brake and shift into D gear; 2. Release the handbrake and foot brake, then press the accelerator to start.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.