Where to Replace the Annual Inspection Sticker?

2 Answers
DiLeonardo
07/28/25 3:31pm
Vehicle annual inspection stickers can be replaced at the local vehicle management office. How to affix the annual inspection sticker: According to Article 13 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China": "The motor vehicle inspection qualification mark and insurance mark shall be affixed to the upper right corner of the front window of the motor vehicle." It is recommended to use a static cling sticker to affix the annual inspection mark, either horizontally or vertically, but attention should be paid to the front and back sides. The back side of the annual inspection mark should adhere to the static cling sticker, with the front side facing the glass. When affixing, try to make it as flat as possible, squeeze out any bubbles, and avoid it falling off. Electronic Annual Inspection Sticker: Vehicles eligible for the electronic inspection mark can obtain the electronic inspection mark through the exemption inspection vehicle mark application process. Once successfully applied, it can be downloaded and saved on a mobile phone for easy presentation and use even when the phone is offline.
Was this review help?
20
2
Share
VonEliana
08/11/25 10:57pm
I'm a young driver, and last time I went to get my annual inspection sticker, I headed straight to the DMV—that's the official designated spot. Once inside, I had to queue up first, bringing my ID card, vehicle registration, and insurance documents. The staff checked everything quite thoroughly. It's best to go early because it can take a long time when it's crowded, but the process is straightforward—once the documents are verified, they issue the new sticker. I also heard that authorized inspection stations can do it, but they have to be the legitimate ones. Remember to place the sticker in the correct position on the lower right corner of the windshield without obstructing the view. Letting it expire is a hassle—light penalties or even getting your car towed—so make sure to renew it on time every year. By the way, don’t leave tools or other items scattered in the car; they might check the sticker more easily. This kind of thing shouldn’t be delayed—going to the DMV is both reliable and hassle-free.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

Should I wear glasses in the C1 license renewal photo?

Whether to wear glasses in the C1 license renewal photo is optional. Below is an introduction to the knowledge about license renewal: 1. New regulations for license renewal: Motor vehicle drivers can apply for license renewal at the vehicle management office of the license issuing location within 90 days before the expiration of the motor vehicle driving license. 2. Required documents: When renewing the license, you need to bring the original and a copy of your ID card, the driving license, a physical condition certificate, three one-inch white background color photos, and the renewal fee. The license photo should not include colored glasses, scarves, earrings, or other accessories that cover facial features. The face should not have obvious distortion, tilting, turning, heavy makeup, or accessories.
15
4
Share

What is the reason for the abnormal noise in the Geely Xingrui fuel tank?

Geely Xingrui fuel tank abnormal noise is caused by the irregular shape design of the fuel tank and the lack of an anti-splash plate design. The functions of engine oil are as follows: 1. Lubrication: When the engine is running, the friction between components is rapid and intense. A sufficiently thick oil film is needed between the piston and the cylinder to separate the two components and reduce friction. 2. Cooling: The engine generates a large amount of heat during operation, and the engine oil carries some of the heat back to the oil pan to dissipate. 3. Cleaning: Oil sludge, carbon deposits, metal wear particles, and inhaled dust can form on engine parts, which can easily lead to carbon buildup.
6
4
Share

Why Deflate Tires When Driving into the Desert?

Deflating tires when driving into the desert is necessary because the high temperatures in the desert can lower tire pressure, reducing the risk of blowouts. Here are the specific benefits of deflating tires for desert driving: 1. Enhanced Traction: Increasing the contact area between the tires and the ground improves traction and reduces the pressure of the vehicle's weight on the ground, thereby minimizing tire sinking. This ensures better tire adhesion when driving on sand, lowering the likelihood of getting stuck. 2. Preventing Blowouts: The high temperatures in the desert can lower tire pressure, reducing the risk of blowouts.
14
5
Share

Are New Energy Vehicles Afraid of Water Wading?

New energy vehicles are afraid of water wading. Here are the relevant explanations: 1. Safety hazards: All vehicles, including new energy vehicles, will have their chassis suspension, braking system, and engine compartment affected by rainwater immersion. If not cleaned in time, impurities and corrosive substances in the water can impact the vehicle's mechanical performance and even pose safety hazards. 2. New energy vehicles: New energy vehicles refer to automobiles that use unconventional vehicle fuels as power sources, integrating advanced technologies in vehicle power control and driving, resulting in advanced technical principles and featuring new technologies and structures.
12
0
Share

Can You Shift Directly from Third Gear to First Gear?

You cannot shift directly from third gear to first gear. Below is a detailed introduction to gear speeds: 1. Gears: Start in first gear, shift to second gear after traveling a few meters, shift to third gear when the speed reaches above 20 mph but below 35 mph, shift to fourth gear when the speed reaches above 35 mph but below 45 mph, and shift to fifth gear when the speed exceeds 45 mph. 2. Precautions: When shifting gears, the clutch and throttle must be coordinated properly. Press the clutch pedal fully while simultaneously releasing the throttle pedal, then quickly shift to the corresponding gear. After shifting, release your hand immediately and avoid keeping it on the gear lever for too long, as this can easily damage the gear lever.
11
5
Share

What is an Intelligent Parking System?

An intelligent automatic parking assistance system refers to a vehicle equipped with sensors, cameras, or radars on its body. These devices emit signals or detect surrounding obstacles to determine their distance and position, thereby identifying the location of nearby parked vehicles. Through algorithms, it achieves a series of automated functions such as quick parking, reverse vehicle locating, and fast payment. Below is an introduction to the automatic parking system: 1. Definition: The Electronic Control Unit (ECU) performs real-time environmental modeling based on sensor information, generates the vehicle's movement path, and controls the vehicle to automatically move into the parking space without collision. 2. Usage Method: The automatic parking system, also known as the parking assistance system, features several radar probes on the vehicle's sides that are not commonly seen in other models. These radar probes use ultrasonic sensors to scan both sides of the road, automatically finding a suitable parking spot by comparing the parking space with the vehicle's length. Once an appropriate spot is found, the driver only needs to shift into reverse gear and control the speed using the brake. The vehicle will then automatically adjust its steering to park itself. When it detects that the space between obstacles in front and behind the vehicle exceeds 1.5 meters, it can easily perform automatic parking without any manual adjustment. The minimum required front and rear spacing for its operation is 40 cm, which is also the minimum spacing generally required for manual parking.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.