Where to Renew Driver's License in Minhang District?

2 Answers
OliviaLynn
07/28/25 8:05pm
Driver's license renewal should be processed at the vehicle management office corresponding to the driver's registered residence or place of residence. In Minhang District, the location for renewing a driver's license is the Second Branch of the Vehicle Management Office, with the service address at Gate 3, 179 Qinchun Road, Minhang District. Below are the relevant provisions from the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": Article 57: A motor vehicle driver shall apply for license renewal at the vehicle management office that issued the original license or another vehicle management office outside the issuing jurisdiction within 90 days before the expiration of the current license. When applying, an application form must be completed. Required documents include: the identity proof of the motor vehicle driver; the motor vehicle driver's license; a medical certificate on physical condition issued by a county-level or higher medical institution or a military medical institution at or above the regimental level. For applications involving specially modified small automatic transmission vehicles for disabled persons, a medical certificate on physical condition issued by a specialized medical institution designated by the provincial health authority must be submitted.
Was this review help?
15
3
Share
McHarper
08/12/25 12:54am
I've lived in Minhang District for several years and just renewed my driver's license last year at the Minhang District Vehicle Management Office, located at No.698 Shuying Road, Minhang District. I went there early in the morning that day, and there were quite a few people—I waited in line for about 40 minutes. Remember to bring your ID card, old driver's license, and a few one-inch photos. If the photos don't meet the requirements, you can retake them on-site. The whole process, including the vision test and paying the 10-yuan fee, was completed quickly. I recommend making an appointment in advance via the 'Shanghai Traffic Police' app to save time and hassle. The office is open from 9 AM to 4 PM, Monday to Friday, and closed on weekends, so don’t go on the wrong day. The location is easy to find—just take a bus after getting off at Hongqiao Metro Station. If driving, it's best to avoid peak hours as parking spaces are limited. After renewing my license, I felt more at ease while driving. Regularly checking your documents is the foundation of safe driving—don’t let an expired license cause trouble.
Was this review help?
10
4
Share
Expand All
More Forum Discussions

What are the reasons why the Geely Vision has power but cannot start?

The reasons why the Vision has power but cannot start: 1. Insufficient fuel: The first thing to check is whether there is enough fuel. If the fuel level is too low, the car naturally won't start. 2. Incorrect gear: Check the gear position. An incorrect gear can also prevent the car from starting. Generally, the correct gear for starting is P (Park) or N (Neutral). Sometimes, due to carelessness when parking, the car may be left in another gear, which naturally causes starting issues. Moreover, an incorrect gear can also pose safety hazards. 3. Electrical circuit failure: It could also be due to a circuit fault or damaged electronic components. Common issues include blown fuses, open circuits in the high-voltage coil, open circuits in the low-voltage circuit, detached central ignition wire, leaking distributor rotor, or damaged spark plugs. Electronic faults mainly refer to the malfunction of the central computer control board, which would then require repair.
13
0
Share

How Often Should Manual Transmission Clutch Plates Be Replaced in Terms of Mileage?

Manual transmission clutch plates should be replaced every 100,000 kilometers. The power transmission device between the engine and the transmission in manual transmission vehicles is the clutch three-piece set, which includes the pressure plate, friction plate, and release bearing. Here are the situations when clutch plates need replacement: When depressing or releasing the clutch pedal, you hear metal friction sounds or even smell a burning odor, which are clear signs of severe clutch plate wear; you notice the clutch engagement point has become higher; you feel a decrease in power when the car is climbing a hill, with the engine speed increasing but the power response being delayed or insufficient; you experience uneven power engagement when releasing the clutch. Methods to extend the lifespan of clutch plates: When shifting gears, slow down the release of the clutch pedal, wait until the clutch is fully engaged, then gradually release the clutch pedal while pressing the accelerator pedal to ensure a smooth start. While driving, try to only depress the clutch pedal during gear shifts and low-speed braking. Avoid pressing the clutch pedal unnecessarily, and refrain from resting your foot on the clutch pedal for extended periods while driving, as this accelerates clutch plate wear and leads to damage.
19
5
Share

What Are the Hazards of Fire-Damaged Vehicles?

Hazards of fire-damaged vehicles: After exposure to high temperatures, the plastic insulation layers of various wiring harnesses will have aged, making them prone to short circuits. In minor cases, this may burn out fuses and electronic control components, while in severe cases, it can lead to spontaneous combustion. In metal heat treatment processes, there is a technique called "annealing." After annealing, the hardness of the metal decreases, making it easier for further processing. A vehicle that has been through a fire essentially undergoes an "annealing" process on its body frame, which reduces the frame's strength. Therefore, fire-damaged vehicles are similar to accident-damaged vehicles in this regard. After a vehicle has been through a fire, the visible damage to plastic components is not the main issue—these can simply be replaced. The real danger lies in the changes to the vehicle's structural strength. Once exposed to fire, the metal's microstructure alters, causing the energy-absorbing zones in collision areas to lose their functionality. In the event of an accident, safety can no longer be guaranteed.
15
5
Share

What is the tire model and specification of the Reiz?

The tire specifications for the Reiz are 235/45R18 and 215/60R16, corresponding to the high-end model and the low-end/sub-low-end models respectively. The Reiz's body dimensions are 4750mm in length, 1795mm in width, and 1450mm in height, with a wheelbase of 2850mm. In terms of suspension, the front suspension is a double-wishbone independent suspension, and the rear suspension is a multi-link independent suspension. The vehicle offers two powertrain options: 1. Equipped with a 2.5-liter V6 naturally aspirated engine, paired with a 6-speed automatic transmission, delivering a maximum power of 142KW, maximum horsepower of 193PS, and maximum torque of 236Nm; 2. Equipped with a 3.0-liter V6 naturally aspirated engine, paired with a 6-speed automatic transmission, delivering a maximum power of 167KW, maximum horsepower of 227PS, and maximum torque of 293Nm.
13
1
Share

What to Do When a Diesel Car Emits Black Smoke?

Solutions for diesel cars emitting black smoke: 1. Remove the air filter and observe the exhaust smoke color. If the black smoke condition improves, the fault is caused by severe dirtiness of the air filter; 2. During engine operation, conduct a cylinder-by-cylinder fuel cut-off test. When a certain cylinder is cut off, if the engine speed decreases, black smoke significantly reduces, and knocking sounds weaken or disappear, it indicates excessive fuel supply to that cylinder. If the engine speed changes little and black smoke disappears, it suggests poor spray quality of the injector in that cylinder; 3. Check if the fuel supply timing is too early. If it is, adjust it accordingly. After identifying the faulty cylinder, disassemble and inspect the injector. If necessary, replace it with a new injector for comparison. If the fault disappears with the new injector, it indicates a problem with the original injector.
12
4
Share

What brand of tires does the GAC Honda Lingpai use?

Honda Lingpai is equipped with Maxxis brand VICTRA-510 series tires, with the specification of 215/55R16. These are paired with 16-inch two-tone alloy wheels, capable of a maximum load capacity of 610KG and a top speed of 210km/h. Here are some relevant details: 1. The tires used for this model are from the Maxxis brand. Their tread patterns mainly fall into four series: Sport Series, Comfort Series, Economy Series, and SUV Series. Different tread patterns can affect the vehicle's performance, fuel consumption, tire noise, and road condition adaptability. 2. Products from the Maxxis brand have certain characteristics—they are relatively wear-resistant, economical, and offer a high comprehensive cost-performance ratio. 3. For over fifty years, the company has consistently provided high-quality tire products for sedans, light trucks, bicycles, motorcycles, ATVs, trailers, and other vehicle types. Their products are sold in more than 170 countries, with business operations spanning Asia, Europe, and North America, making it one of the world's leading tire brands.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.